Abstract:An effective way for improving the global load-carrying capacity of a steel arch with a welded hollow section is to increase the height of its webs. However, the high and thin web may buckle locally, which will affect the global load-carrying capacity and should be taken into account in predicting the global strength of the arch. This paper presents a numerical investigation for the in-plane strength and design for pin-ended circular steel arches with a welded hollow section, focusing on the effects of web local buckling by the large deformation inelastic analysis in association with a finite shell element model. The circular steel arches subjected to a radial load uniformly distributed along the arch length, a load uniformly distributed over the full span of the arch, or/and over the half span of the arch and their various combinations are considered in the investigation of their failure modes and strengths. The initial global and local geometric imperfections as well as residual stresses are included in the finite element model. It is found that web local buckling influences the global strength of the steel arches significantly and needs to be accounted in formulate their strength design formulas. The parameters related to the web local buckling and global buckling of the arch are thoroughly explored. It is found that the stability coefficients of arches under the nominal uniform axial compression are related to the equivalent normalized web height-to-thickness ratio of the cross-section and the normalized slenderness of the arch, and accordingly the design formula of the stability coefficients is proposed by including their effects. In addition, a design formula for predicting the strengths of the arches under a load uniformly distributed over the full span is developed by introducing a corrective coefficient into the stability coefficient, and it is found that the corrective coefficient is related to the arch rise-to-span ratio and slenderness of the arch. Furthermore, a general interaction design formula is developed for predicting in-plane strength of the arches under general in-plane loading such as a load uniformly distributed over the half span of the arch and various combinations of a full span uniform load and a half span uniform load. Comparisons with the finite element results demonstrate the proposed design formulas can provide good predictions and/or lower bound predictions for the strengths of the steel arches with a welded hollow section.

Elastic-plastic Stability of Shear-Deformable Circular Arches

Elastic Lateral–torsional Buckling of Circular Arches Subjected to a Central Concentrated Load

In-plane Nonlinear Buckling Analysis of Circular Arches Considering Shear Deformation

IN-PLANE NONLINEAR ANALYSIS AND BUCKLING OF SHEAR-DEFORMABLE CIRCULAR ARCHES

Case Study on Stability Performance of Asymmetric Steel Arch Bridge with Inclined Arch Ribs

In-Plane Nonlinear Buckling Analysis of Deep Circular Arches Incorporating Transverse Stresses

STUDY FOR IN-PLANE ULTIMATE STRENGTH OF STEEL CIRCULAR ARCHES WITH HORIZONTAL SPRING SUPPORTS

IN-PLANE ELASTIC BUCKLING OF STEEL CIRCULAR ARCHES WITH HORIZONTAL SPRING SUPPORT

In-plane buckling analysis of the horsizontal spring circular arch under concentrated load at the mid-span

Elastic and Inelastic Stability of a Steel Arch Subjected to a Crown Point Load under an Elevated Fire Environment

Finite-element Analysis for Nonlinear Stabilities of Concrete-filled Steel Tubular Arch Bridges

Exact Matrix Stiffness Method for Out-of-Plane Buckling Analysis of Funicular Arches Considering Warping Deformations

Theoretical and experimental studies of in-plane stability design of circular arches subjected to axial force and moment

In-Plane Failure and Strength of Pin-Ended Circular Steel Arches Considering Coupled Local and Global Buckling

In-plane nonlinear buckling analysis and design method of concrete-filled steel tubular catenary arches

Strength Design of Pin-Ended Circular Steel Arches with Welded Hollow Section Accounting for Web Local Buckling

On Collapse of Non-Uniform Shallow Arch under Uniform Radial Pressure

Strength and Design of Pin-Ended Circular Arches with Sinusoidal Corrugated Web under Combined In-Plane Loads

In-plane failure mechanism and stability bearing capacity design of planar plate-tube-connected circular steel arches

Buckling of Mono-symmetric I-section Circular Arches

OUT-OF-PLANE STABILITY DESIGN OF PIN-ENDED CIRCULAR STEEL ARCH UNDER PURE COMPRESSION