Abstract:In this study, the 2-step hydrothermal synthesis of pure phase analcime zeolite from the combination of glass powder waste and aluminium anodizing waste was carried out, to contribute to the reduction of disposal of these industrial residues in sanitary landfills. Population growth has intensified industrial activities worldwide, increasing the generation of waste with a high potential for environmental impact. Currently, the reuse of solid wastes has become an alternative for the development of materials with greater added value. Placket Burman statistical design was used to identify the variables of greater statistical relevance in the synthesis process, aiming at future optimization. Crystallization time and temperature were verified as the most relevant variables in the synthesis, while calcination time and calcination temperature in the alkaline fusion step were the variables with less relevance. The results revealed the formation of single-phase analcime, reaching a crystallinity of up to 75% and a specific surface area of 43.3 m 2 .g −1 . Scanning electron microscopy analysis showed the presence of particles with trapezoidal morphology, typical of analcime zeolite. Zeta potential measurement revealed an isoelectric point in pH 2.6, an important parameter in case of application in wastewater treatment. The investigated experimental conditions also enabled the formation of other zeolites, e.g ., Na-P1, cancrinite, and sodalite, demonstrating that the combination of glass powder waste and aluminium anodizing waste can be used to obtain different zeolitic phases. Consequently, products with greater added value can be obtained, contributing to sustainability in the aluminium and glass industries.

Synthesis and Characterization of Analcime Using Quartz Syenite Powder by Alkali-Hydrothermal Treatment

Synthesis of Analcime Crystals and Simultaneous Potassium Extraction from Natrolite Syenite

Preparation of Analcime from Palygorskite

Hydrothermal Synthesis of Analcime and Hydroxycancrinite from K-feldspar in Na2SiO3solution: Characterization and Reaction Mechanism

Synthesis of analcime from fly ash and its adsorption of Cs+ in aqueous solution

Preparation of Leucite from Analcime by Hydrothermal Method

Synthesis of Kalsilite from Microcline Powder by an Alkali-Hydrothermal Process

Synthesis and Characterization of Kalsilite from Microcline Powder

Alkli-activated Mechanisms of Kaolinite and Hydrothermal Synthesis of 4A Zeolite

Crystal Structural Transformation and Kinetics of NH4+/Na+ Ion-Exchange in Analcime

Synthesis of Analcime Zeolite from Glass Powder Waste and Aluminium Anodizing Waste

Hydrothermal Crystallization of Nano-kaolinite from Precursor of Acid Treating Kalsilite

Hydrothermal Synthesis of Analcime from Construction Waste Bricks and Its Adsorption Mechanism for Pb2+

Controllable and SDA-free synthesis of sub-micrometer sized zeolite ZSM-5. Part 1: Influence of alkalinity on the structural, particulate and chemical properties of the products

The Hydro-Thermal Stability of Hornblende Syenite in NaOH Solution

Hydrothermal/Alkali Fusion Synthesis of Zeolite NaA and NaX from Pyrophyllite Mineral Clay

An Experimental Study on Preparation of Nanocrystalline Wollastonite Powders from Sodium-Calcium Siliceous Hydration Residue

Investigation of Various Influencing Factors of Hydrothermal Synthesis of Analcime Zeolite

Synthesis, characterization and mechanisms of one-part geopolymeric cement by calcining low-quality kaolin with alkali

Preparation of Mesoporous Analcime/Sodalite Composite from Natural Jordanian Kaolin

Hydrothermal Decomposition Process of K‐feldspar in NaOH Solution