Abstract:The metallurgical properties of blast furnace slag changed when high alumina iron ore was used extensively due to the resulting changes of the molten slag microstructure. In the study, based on typical CaO–MgO–SiO2–Al2O3 slag systems with different w(Al2O3) content, molecular dynamics simulation was used to calculate the microstructural properties of particles in the high-temperature slag system, such as bond length, partial radial distribution function, coordination numbers, and diffusion coefficient. In addition, X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, and 27Al solid-state magic angle spinning nuclear magnetic resonance (27Al SS MAS NMR) were used to detect and analyze the samples. The comprehensive calculations and experimental results show that increasing w(Al2O3) can enhance the structural stability of each ion pair, and the strength of the structural stability is such that Si–O > Al–O > Mg–O > Ca–O. The self-diffusion coefficients are as follows: Mg2+ > Ca2+ > Al3+ > Si4+, which leads to the transformation of the [SiO4]4−(Q0), [Si2O7]6−(Q1) and [Si2O6]4−(Q2) structural units to [Si2O5]2−(Q3). The degree of polymerization of slag increased as well as the stability of the structural units. Moreover, the coordination of Al will change from the [AlO6]9−octahedral structure of six-coordinated Al to the [AlO5]7−pentahedral structure of five-coordinated Al and the [AlO4]5−tetrahedral structure of four-coordinated Al. It was also found that the content of non-bridge oxygen in the whole slag system decreased continuously, leading to the increasing degree of polymerization of slag, and the experimental results were consistent with the molecular dynamics calculation.

Relationship Between Structure and Viscosity of CaO–SiO2–Al2O3–MgO–TiO2 Slag

Relationship Between Structure and Viscosity of CaO–SiO2–MgO–30.00 Wt-%Al2o3 Slag by Molecular Dynamics Simulation with FT-IR and Raman Spectroscopy

Investigation of the Viscosity and Structural Properties of CaO-SiO 2 -TiO 2 Slags

Flowability and Structural Evolution of CaO-SiO2-MgO-Al2O3 Slag with Varying MgO/CaO Ratios:Experiments and MD Simulations

Structure Analysis of CaO–SiO2–Al2O3–TiO2 Slag by Molecular Dynamics Simulation and FT-IR Spectroscopy

Polymeric Structure Evolution Behavior Analysis of Aluminosilicate-Based Smelting Slag

Role of Na2O and TiO2 on viscosity and structure of Sodium-Titanium-bearing slag

Effect of W(mgo)/w(al2o3) Ratio and Basicity on Microstructure and Metallurgical Properties of Blast Furnace Slag

Effect of CaO/MgO on Rheological Properties and Structure of CaO-MgO-SiO2-Al2O3-50% TiO2 Slag with SiO2/Al2O3=1.0

Effect of Al2O3 on the Molten Slag Microstructure Information by Molecular Dynamics Simulation and Experimental Analysis

Influence of MgO, Al2O3and CaO/SiO2on the Viscosity of Blast Furnace Type Slag with High Al2O3and 5 Wt-% TiO2

Understanding the Relationship Between Structure and Thermophysical Properties of CaO-SiO 2 -Mgo-al 2 O 3 Molten Slags

Effects of Equimolar Substitution of BaO for CaO and Al2O3 for SiO2 on the Viscosity and Structure of CaO-SiO2-MgO-Al2O3-BaO Slag

Effect of BaO/Al2O3 Molar Ratio on the Viscosity and Structure of CaO SiO2MgO Al2O3BaO Slag

Molecular Dynamics Simulation on the Influence of Al2o3 on the Slag Structure at 1873 K

Molecular Dynamics Simulation, Spectroscopy Characterization and Properties Testing of High-Titanium CaO-SiO2-10 Wt.%mgo-13 Wt.%al2o3-4 Wt.%feo-40 Wt.%tio2 Slag Melts

Viscosity and Structure Relationship with Equimolar Substitution of CaO with MgO in the CaO–MgO–Al2O3–SiO2 Slag Melts

Structural Interaction between BaO and Al2O3 in Aluminosilicate Slags

Thermophysical Properties, Crystallization Behavior and Structure of CaO-SiO2-MgO-Al2O3-TiO2-FeO Slag with Varying TiO2 Contents

Effect of TiO2 on the Viscous Behaviour of the CaO-SiO2-14 Mass% Al2O3-8 Mass% MgO-TiO2 Slag

Influence Of Tio2 And Basicity On Viscosity Of Ti Bearing Slag