Influence of MgO, Al2O3and CaO/SiO2on the Viscosity of Blast Furnace Type Slag with High Al2O3and 5 Wt-% TiO2

Z. Yan,X. Lv,J. Zhang,Y. Qin,C. Bai

DOI: https://doi.org/10.1080/00084433.2015.1126903

2016-01-01

Canadian Metallurgical Quarterly

Abstract:The effect of MgO, Al2O3 and CaO/SiO2 on the viscosity of CaO-SiO2-Al2O3-MgO-5 wt-% TiO2 slag was studied in the temperature range of 1673-1773 K. At a fixed CaO/SiO2 ratio of 1.17 and 12 wt-% Al2O3, the viscosity of the slag decreased with increasing MgO content because of depolymerisation of the silicate structures. At a fixed CaO/SiO2 ratio of 1.17 and 8 wt-% MgO, the viscosity of the slag increased with increasing Al2O3 content. At 8 wt-% MgO and 12 wt-% Al2O3 wt-%, increasing the CaO/SiO2 ratio from 1.07 to 1.50 resulted in lower slag viscosity. The temperature dependencies of the viscosity on MgO addition, Al2O3 addition, and CaO/SiO2 ratio were analyzed, and the apparent activation energies of each system were found to be between 178 and 232 kJ/mol, 273 and 360 kJ/mol, and 204 and 233 kJ/mol, respectively. Five different viscosity models were employed to predict slag viscosity, and the Riboud model was found to be the best for predicting this parameter.