Abstract:The diamond-like carbon films (DLC) coated on medical titanium alloy suffer from the problem of insufficient coatings adhesion due to thermal expansion mismatch, different wetting properties at the film/substrate interface. In order to enhance DLC coatings adhesion, the titanium alloy substrate surface was pretreated by laser texturing and carburizing with different texture densities and different laser carburizing powers. The adhesion and tribological properties of the laser textured (LTC), laser carburized (LCC), and hybrid laser textured and carburized (LTCC) DLC coatings were evaluated by scratch test, indentation test and wear test, compared with the only polished DLC coatings (PC). The results showed that the bonding strength of LTC, LCC and LTCC samples was about 1.52, 1.62 and 2.14 times higher than that of PC samples, and the best tribological properties were obtained for LTCC samples. Meanwhile, the density of micro-dimples and the power of laser carburizing significantly affect the adhesion and tribological properties. Among the dent densities studied, textured samples with a density of 30 % showed the lowest mean friction coefficient and wear rate. The critical force of the carburized DLC coatings was first rising and then falling as the laser carburizing power increased, and the bond strength of the film base reached the maximum at a carburizing power of 10 W. The texturing treatment results in an improvement of the specific surface area of the substrate and the laser carburizing treatment results in an increase of the coating nucleation density and decrease of coatings graphitization degree, both improving the coatings adhesion and triboligical behavior.

Adhesion Reduction of Diamond-Like Carbon Films Based on Different Contact Geometries by Using an Afm

Diamond-Like Carbon Thin Films Deposited On Ti6al4v Alloy Surface By Plasma Gun At Atmospheric Pressure

Afm/Ffm Study Of Micro/Nano-Tribological Properties Of Diamond-Like Carbon Film

Diamond-like Carbon Film on 20 CrNiMo Steel Prepared by Hollow-Cathode Glow Discharge

Wear-resistance of Diamond-like Carbon Thin Films Deposited on the Metal Seal Ring Surface by Plasma Gun at an Atmospheric Pressure

Structural Characters and Tribological Properties of Diamondlike Carbon Films

Regulating the fretting behavior of diamond-like carbon films by changing the composition and structure

Excellent Adhered Thick Diamond-Like Carbon Coatings by Optimizing Hetero-Interfaces with Sequential Highly Energetic Cr and C Ion Treatment

The Effect of Ti-doping and Stress Relaxation Layer on Adhesion Strength of DLC Thin Film

Study on the substrate surface micro-texturing/carburizing regulating the film-substrate adhesion and wear behavior of DLC coatings

Evaluation of Anti-Adhesion Characteristics of Diamond-Like Carbon Film by Combining Friction and Wear Test with Step Loading and Weibull Analysis

Improved Interfacial Adhesion Between TiAlN/DLC Multi-Layered Coatings by Controlling the Morphology Via Bias

Effects of Ti Interlayer on Adhesion Property of DLC Films: A First Principle Study

Experimental Study of Diamond-like Carbon Film on Aermet100 Steel and First-Principles Calculation of Interfacial Adhesion

Tribological Behavior of Diamond-Like Carbon Film with Different Tribo-Pairs: A Size Effect Study

Influences of Different Interlayers on Mechanical and Tribological Properties of DLC Films

A study of the wear mechanism of diamond-like carbon films

Growth and Tribological Property Characterization of Diamond-Like-Carbon Films

Micro/Nanomechanical and Tribological Properties of Thin Diamond-Like Carbon Coatings

Fretting Wear and Fretting Fatigue Behaviors of Diamond-Like Carbon and Graphite-Like Carbon Films Deposited on Ti-6Al-4V Alloy

Synergistic Friction-Reducing and Anti-Wear Behaviors of DLC on NCD Films Via In-Situ Synthesis by Fs Laser Ablation