Abstract:In order to improve performance of internal combustion engines and meet the requirements of the new pollutant emission regulations, advanced combustion strategies have been investigated. The newly designed partially premixed combustion concept has demonstrated its potential for reducing NOx and particulate matter emissions combined with high indicated efficiencies while still retaining proper control over combustion process by using different injection strategies. In this study, parametric variations of injection pressure, second injection and third injection timings were experimentally performed to analyze the effect of the injection strategy over the air/fuel mixture process and its consequent impact on gaseous compound emissions and particulate matter emissions including its size distribution. Tests were carried out on a newly designed two-stroke high-speed direct injection compression-ignition engine operating with the partially premixed combustion concept using 95 research octane number gasoline fuel. A scanning particle sizer was used to measure the particles size distribution and the HORIBA 7100DEGR gas analyzer system to determine gaseous emissions. Three different steady-state operation modes in terms of indicated mean effective pressure and engine speed were investigated: 3.5 bar indicated mean effective pressure and 2000 r/min, 5.5 bar indicated mean effective pressure and 2000 r/min, and 5.5 bar indicated mean effective pressure and 2500 r/min. The experimental results confirm how the use of an adequate injection strategy is indispensable to obtain low exhaust emissions values and a balance between the different pollutants. With the increase in the injection pressure and delay in the second injection, it was possible to obtain a trade-off between NOx and particulate matter emission reduction, while there was an increase in hydrocarbon and carbon monoxide emissions under these conditions. In addition, the experiments showed an increase in particle number emissions and a progressive shift in the particles size distribution toward larger sizes, increasing the accumulation-mode particles and reducing the nucleation-mode particles with the decrease in the injection pressure and delay in the third injection.

Experimental Study On Partially Premixed Compression Ignition Combustion Fueled With A Low Octane Number Primary Reference Fuel Using Two-Stage Fuel Supplying

Investigation of the Combustion and Emission Characteristics of Partially Premixed Compression Ignition in A Heavy-Duty Diesel Engine

Experimental Studies on the Key Parameters Controlling the Combustion and Emission in Premixed Charge Compression Ignition Concept Based on Diesel Surrogates

Effects of multiple injection strategies on gaseous emissions and particle size distribution in a two-stroke compression-ignition engine operating with the gasoline partially premixed combustion concept

Combustion and emission characteristics of low octane number gasoline with partially diffused compression ignition

Combined Effects of Fuel Reactivity and Intake Thermodynamic Conditions on Heat Release and Emissions of Compression Ignition Combustion

Fuel Octane Effects in the Partially Premixed Combustion Regime in Compression Ignition Engines

Effects of the Injection Parameters on the Premixed Charge Compression Ignition Combustion and the Emissions in A Heavy-Duty Diesel Engine

Experimental Investigations of Gasoline Partially Premixed Combustion with an Exhaust Rebreathing Valve Strategy at Low Loads

Experimental Study On Homogeneous Charge Compression Ignition Combustion With Primary Reference Fuel

Some Observations on the Effects of EGR, Oxygen Concentration, and Engine Speed on the Homogeneous Charge Combustion of n-Heptane

Partially Premixed Combustion Based on Different Injection Strategies in a Light-Duty Diesel Engine

Study on the Double Injection Strategy of Gasoline Partially Premixed Combustion under A Light-Duty Optical Engine

Investigation on the Dual-Fuel Active-Thermal Atmosphere Combustion Strategy Based on Optical Diagnostics and Numerical Simulations

Potential Improvement in PM-NOX Trade-Off in a Compression Ignition Engine by N-Octanol Addition and Injection Pressure

Study On Premixed Combustion In A Diesel Engine With Ultra-Multihole Nozzle

Effect of Fuel Oxygen on the Trade-Offs Between Soot, NOx and Combustion Efficiency in Premixed Low-Temperature Diesel Engine Combustion

Experimental studies on the dual-fuel sequential combustion and emission simulation

Combustion and Emission Characteristics of Multiple Premixed Compression Ignition (MPCI) Mode with Low Octane Gasoline Fuels

Experimental Investigation on the Effects of Octane Sensitivity on Partially Premixed Low-Temperature Combustion

Combustion Improvement of a Light Stratified-Charge Direct Injection Engine