Abstract:Thermal, mechanical and tribological properties of carbon fabric/resin laminated composites containing carbon fiber powder with different densities. Carbon fabric/resin laminated composites (CFRC) are extensively used in aerospace, transportation, and other fields owing to their superiorities of lightweight, high strength, and convenient integral molding. Therefore, strong interlaminar binding and prominent wear resistance are urgent requirements for avoiding premature failure of laminated materials in harsh working environments. To elevate the superficial wear resistance and interlaminar bonding strength of composites simultaneously, the modified composites were obtained by introducing carbon fiber powder (CFP) with different densities on the surface of the composites and between layers. The experimental results indicate that CFP can be evenly distributed in the interlaminar resin enrichment zone of the sample (CFRC‐40) when the deposition density is 40 g/m2. Consequently, CFRC‐40 presents optimal thermal conductivity owing to better heat transfer bridges between layers of the composite established by CFP. At the same time, the mechanical properties such as the tensile, impact, and interlaminar shear strengths of CFRC‐40 are improved by 42.8%, 10.2%, and 8.5%, respectively, compared with the original CFRC, which are attributed to the absorption of crack propagation energy and the inhibition of crack propagation by CFP. Furthermore, the dynamic friction coefficient maintains at a high level after introducing CFP with a density of 40 g/m2, while the wear rate significantly decreases by 61.2% from 12.99 × 10−14 m3(N m)−1 to 5.04 × 10−14 m3(N m)−1. This study proposes an innovative strategy to improve the interlaminar bonding of carbon fabric/resin laminated composite, which is conducive to obtaining composite with excellent mechanical and tribological properties. Highlights A facile and effectual method was adopted to introduce carbon fiber powder (CFP) into the interlamination and surface of the composites simultaneously. The mechanical properties and abrasive resistance of the composites were obviously strengthened by regulating the content and distribution of CFP. CFP at a certain scale, could not only hinder the propagation of cracks but also alleviate the surface wear and extend the service life of composites.

Lightweight carbon-bonded carbon fiber composites with quasi-layered and network structure

Optimizing the Thermal Properties of Fiber Reinforced Phthalonitrile Composites

Carbon-bonded Carbon Fiber Composites Containing Uniformly Distributed Silicon Carbide

Lightweight carbon-bonded carbon fiber composites prepared by pressure filtration technique

Eco-Friendly Preparation of Carbon-Bonded Carbon Fiber Based on Glucose-Polyacrylamide Hydrogel Derived Carbon as Binder

SiOC Modified Carbon‐bonded Carbon Fiber Composite with SiC Nanowires Enhanced Interfibrous Junctions

Fabrication And Heat-Insolation Of A Novel Low-Density And Low Thermal Conductivity Carbon/Phenolic Composite

Fabrication and Properties of Lightweight ZrB2 and SiC-modified Carbon Bonded Carbon Fiber Composites Via Polymeric Precursor Infiltration and Pyrolysis

Carbon-bonded Carbon Fiber Composites Reinforced with SiOC-based Polymer Derived Ceramics: Microstructure and Properties

Improved Thermal Stabilities, Ablation and Mechanical Properties for Carbon Fibers/Phenolic Resins Laminated Composites Modified by Silicon-containing Polyborazine

Tailoring layered Csf/SiBCN composites with pseudoplastic fracture behavior: Strengthening and toughening mechanisms

Preparation, modification, and coating for carbon-bonded carbon fiber composites: A review

Fabrication and Properties of a Novel Low-density Resin Pyrolysis Carbon Modified Carbon Fiber Composite

The Microstructure and Ablation Behavior of Carbon Fiber/phenolic Aerogel Composites

Improving mechanical and tribological properties of carbon fabric/resin laminated composites by carbon fiber powder

Designing a Low-Temperature Curable Phenolic/benzoxazine-Functionalized Phthalonitrile Copolymers for High Performance Composite Laminates

Fabrication and Properties of Lightweight SiOC Modified Carbon-Bonded Carbon Fiber Composites

Lightweight chopped carbon fiber/carbon composites with low thermal conductivity fabricated by vacuum filtration method

Effect of Pyrolytic Carbon Interface Thickness on Microstructure and Mechanical Properties of Lightweight Zirconium Boride Modified Carbon-Bonded Carbon Fiber Composites

Preparation, mechanical, thermal and ablative properties of lightweight needled carbon fibre felt/phenolic resin aerogel composite with a bird's nest structure