Abstract:In this work, the preparation of foam-gelcasting was simplified with a copolymer of isobutylene and maleic anhydride (Isobam), avoiding the traditional gelling system including many additives such as monomer, cross-linking agent, initiator and catalyst. Highly porous yttria-stabilized zirconia (YSZ) ceramics with 76.2–84.9% porosity were prepared via foam-gelcasting method using YSZ powder as the raw material, Isobam as the dispersant and gelling agent, triethanolamine lauryl sulfate as the foaming agent and sodium carboxymethyl cellulose as the foam stabilizing agent. The effects of solid loading, the content of foaming agent as well as sintering temperature were investigated. With the increase in solid loading of slurries, lower porosity was obtained, and the compressive strength and thermal conductivity showed a tendency of increase. Porous YSZ ceramics with compressive strength of 0.69–3.66 MPa showed low thermal conductivity in the range of 0.137–0.254 W/(m·K) at room temperature. The as-prepared sample showed good thermal insulating performance at high temperature. The km in GM model was during 0.4–0.7, which indicated the pore structure containing the internal and external porosities. This work provides a facile method for the fabrication of porous YSZ ceramics which can be potentially applied as thermal insulation materials at high temperature.

Design and Fabrication of Porous Zro2/(Zro2 + Ni) Sandwich Ceramics with Low Thermal Conductivity and High Strength

Anisotropic Porous Ceramic Material with Hierarchical Architecture for Thermal Insulation

Novel Al 2 O 3 –sio 2 Aerogel/porous Zirconia Composite with Ultra-Low Thermal Conductivity

Novel Nanoporous Silica Aerogel Impregnated Highly Porous Ceramics with Low Thermal Conductivity and Enhanced Mechanical Properties

Fabrication and Properties of Fibrous Porous Mullite–zirconia Fiber Networks with a Quasi-Layered Structure

A Novel Way to Fabricate Highly Porous Fibrous YSZ Ceramics with Improved Thermal and Mechanical Properties

Fabrication and Properties of Porous Yttria-Stabilized Zirconia Ceramics

Analytical modeling of thermal residual stresses and optimal design of ZrO 2 /(ZrO 2 +Ni) sandwich ceramics

Porous yttria-stabilized zirconia ceramics with ultra-low thermal conductivity

Fabrication and Mechanical Properties of Lightweight Zro2 Ceramic Corrugated Core Sandwich Panels

Analytical modelling of thermal residual stresses and optimal design of ZrO2/(ZrO2+Ni) sandwich ceramics

Effects of porosity and pore size on mechanical and thermal properties as well as thermal shock fracture resistance of porous ZrB2–SiC ceramics

Preparation and Properties of ZrB2-SiC Porous Ceramics by Spark Plasma Sintering

Porous yttria-stabilized zirconia ceramics with low thermal conductivity via a novel foam-gelcasting method

Facile processing of oriented macro-porous ceramics with high strength and low thermal conductivity

In-situ Synthesis of Hierarchically High Porosity ZrB2 Ceramics from Carbon Aerogel Template with Excellent Performance in Thermal Insulation and Light Absorption

Low sintering shrinkage and high strength of porous mullite–zirconia ceramics: Effect of AlF3 and ZrSi2 contents

Fabrication And Properties Of Porous Si3n4-Sio2 Ceramics With Dense Surface And Gradient Pore Distribution

Fabrication of mechanically robust nanoporous ZrSiO4 ceramics at low temperature with a low doping level of Mn dopant

Fabrication and Strengthening of Porous Si3N4 Ceramics by Replacement of Oxide Phase with Si3N4 at Grain Boundary Through Carbothermal Nitridation

Microstructure and properties of highly porous Y2SiO5 ceramics produced by a new water-based freeze casting