Abstract:This paper establishes a new model for predicting machined surface topography and anisotropic texture direction in peripheral milling. Unlike previous models, this model takes into account the largest number of influential factors, i.e., tool setting error (radial offset and axial tilt), static tool deflection, forced vibration, chatter vibration, and stochastic tool grinding error and wear (STGEW). STGEW, quantified by the normal distribution (mu, sigma(2)), is incorporated into the model for the first time. The model predictions for 3D surface topography, anisotropic texture direction, 2D surface profile or roughness agree remarkably well with experimental or published results, under both stable and unstable milling conditions. It is found that static deflection slightly attenuates the effect of tool setting error on roughness. Even machining with fresh tools or tools with very small cutting length (<15 mm) and wear (VB similar to 5 mu m), inherent STGEW creates random scratches with different geometries parallel to feed direction on the milled surface. STGEW expands the difference of roughness in axial direction. STGEW induces an additional surface texture in feed direction, which co-exist with axial texture contributed by feed marks when standard deviation sigma to feed rate f(t) ratio is small. As sigma increases, (1) feed marks are gradually obliterated by scratches, and surface texture is only oriented in feed direction; (2) the mean and variance of roughness in both directions increase, and axial roughness prevails transverse toughness at high u. The study discovers that, STGEW, even with small sigma (e.g., sigma=[0.01 mu m, 0.1 mu m]), is an important factor affecting surface topography, anisotropic surface texture direction and roughness that cannot be ignored, especially in the case of low-feed machining, e.g., f(t) = 0.05 mm, which is commonly adopted in finish-milling of difficult-to-cut materials. The proposed model can be used to reliably and accurately predict surface topography, surface roughness and surface texture direction in peripheral milling operation.

Theoretical Analysis on Generating Mechanism of Machined Surface in Ball-nosed End Milling for Spherical Surface. 3rd Report. Dependence of Shape of Machined Surface on Tool Orientation.

Theoretical Analysis on Generating Mechanism of Machined Surface in Ball-nosed End Milling for Spherical Surface. (2nd Report). the Estimation of Machined Surface Based on Spiral Cutting Edge in Consideration of Frank Interference.

Non-redundant tool trajectory generation for surface finish machining based on geodesic curvature matching

Relationship Between the Tool Orientation and the Machining Accuracy in the Ball-Nosed End Milling

Geometrical Study on Machining Mechanism at Center of Ball-Nosed End Mill.

Geometry Simulation and Evaluation of the Surface Topography in Five-Axis Ball-End Milling

Improving Machined Surface Textures in Avoiding Five-Axis Singularities Considering Tool Orientation Angle Changes

Study on Analytical Model of Surface Roughness Prediction in NC Machining

Isoscallop of Self-Adaptive Tool Orientation with Toroidal Cutter under Optimum Orientation of MCPs

Influence of Tool Rotation Errors on Flank Machined Surface

Tool Orientation Optimization Based on Spatial Tractrix Method for Five-Axis CNC Machining with Ball End Cutters

Theoretical Analysis of Undeformed Chip Thickness for Multi-Axis Ball-Nosed End Milling.

Tool Orientation Optimization of 5-Axis Ball-End Milling Based on an Accurate Cutter/workpiece Engagement Model

Modelling and Optimization of Machined Surface Topography in Ball-End Milling Process

A novel approach of stability and topography prediction in five-axis ball-end milling process through workpiece-edge-coupling

Study on the influence of milling tool inclination angle on surface quality and optimal selection in the ultra-precision diamond milling of curved surfaces

Determination of Flat-End Cutter Orientation in 5-Axis Machining

Modelling of Surface Roughness and Studying of Optimal Machining Position in Side Milling

Simultaneous Optimization of the Feed Direction and Tool Orientation in Five-Axis Flat-End Milling

Modelling of Machined Surface Topography and Anisotropic Texture Direction Considering Stochastic Tool Grinding Error and Wear in Peripheral Milling

Optimization of Machining Path for Complex Surface Milling in TC11 Based on the K-Means Algorithm