Abstract:Five-axis ball-end milling is widely used in energy, ship, aerospace, and other fields. As one of the difficulties in milling research, milling force is often critical to the processing efficiency and quality of part. For predicting the milling force of the five-axis ball-end milling better, this paper presents a cutting force coefficients identification model which is related to the instantaneous chip layer thickness and axial position angle considering the cutter run-out. For five-axis ball-end milling of the oblique plane, the relationship of feed direction, cutter axis vector, and machined surface is parameterized. The boundary curves of cutter workpiece engagement (CWE) are determined by intersecting spatial surfaces. The boundary curves are discretized, and an algorithm of in-cut cutting edge (ICCE) is proposed by defining the distance between discrete points and the cutting edge. Combining the instantaneous chip thickness considering arbitrary feed direction and cutter run-out, the five-axis milling force model of ball-end mill is established. Based on the undetermined coefficient method and the instantaneous average milling force of teeth, the cutting force coefficients identification model corresponding to the instantaneous chip layer thickness and the axial position angle is established. Furthermore, cutter run-out parameters are obtained combined with instantaneous measured milling force of single tooth. The experimental and simulation examples demonstrate that the CWE determined by the spatial surfaces is consistent with the experimental results. The ICCE is in good agreement with the simulation results based on the solid modeling method. A large number of milling experiments under different processing parameters show that the cutting force coefficients and cutter run-out parameters identification model can be effectively applied to five-axis ball-end milling.

Tool Orientation Optimization of 5-Axis Ball-End Milling Based on an Accurate Cutter/workpiece Engagement Model

Simultaneous Optimization of the Feed Direction and Tool Orientation in Five-Axis Flat-End Milling

Tool Orientation Adjustment for Improving the Kinematics Performance of 5-Axis Ball-End Machining Via CPM Method

Enhanced modeling of instantaneous uncut chip thickness and cutter workpiece engagement region in 5 axis ball end milling: Case of the tilt orientation

Tool Orientation Optimization Based on Spatial Tractrix Method for Five-Axis CNC Machining with Ball End Cutters

A Cutter Orientation Modification Method for Five-Axis Ball-End Machining with Kinematic Constraints

Tool Orientation Optimization Considering Cutter Deflection Error Caused by Cutting Force for Multi-Axis Sculptured Surface Milling

Optimal Tool Orientation for Five-axis Flat-end Cutter Machining

Stability Prediction Based Effect Analysis of Tool Orientation on Machining Efficiency for Five-Axis Bull-Nose End Milling

Generating Efficient Toolpath by Cutter Posture Optimization in Five-Axis Machining Based on Inverse Feedback Mechanism

An Adaptive Optimizing Tool Orientation Method for 5-axis Toroidal-end Milling of Free-form Surfaces

Mechanistic Modeling of Five-Axis Machining with a General End Mill Considering Cutter Runout

Process Optimization and Typical Application Based on Geometrical Analysis and Response Surface Method for High-Speed Five-Axis Ball-End Milling Operation

Generating Collision-Free Tool Orientations For 5-Axis Nc Machining With A Short Ball-End Cutter

Kinematic Performance-Oriented Tool Orientation Optimization for a Hybrid Machining Robot in Five-Axis Ball-End Milling

A Global Tool Orientation Optimization Method for Five-axis CNC Machining of Sculptured Surfaces

Wholly smoothing cutter orientations for five-axis NC machining based on cutter contact point mesh

Study on 5-axis End Milling of Free-form Surfaces

An Identification Model of Cutting Force Coefficients for Five-Axis Ball-End Milling

An Approach to Modeling Cutting Forces in Five-Axis Ball-End Milling of Curved Geometries Based on Tool Motion Analysis

Geometrical Modeling of Tool-Workpiece Contact Zone and Chip Formation in Finish Ball End Milling Process with Tool Inclination Angles