Abstract:H2/O2 chemistries are of great crucial for all hydrocarbon and syngas oxidations. Recent study showed that presence of residual H-atom in shock tubes may heavily influences experimental determination of ignition delay times in H2/O2 mixtures. Although numerous studies of hydrogen ignition delay times were reported, none of them discussed the residual H-atom in their studies which may impact the accuracy of their measurements. In this study, a systematic measurement related to the ignition delay times were conducted for H2/O2 mixtures diluted with argon over the temperatures from 850 K to 1500 K, the pressures from 1.2 to 16.0 atm, and the equivalence ratios of 0.5, 1.0 and 2.0. Special attentions were paid to eliminate the influence of residual H-atom on ignition delay time and the calculation showed that the residual H-atom in current shock tube shows no obvious effect on ignition delay time, which guarantees the present data more convincing. The measurements showed that the hydrogen mixtures have different global activation energies under different pressures. Thus, correlations were derived under different pressures based on all experimental data, which fit fairly well with the experimental data. A couple of detailed kinetic models from literature were validated against the present experimental results. The result shows that the mechanism of Kéromnès-2013 yields the best agreement with data from shock tube experiments at various pressures up to 16 atm, while Davis-2005, GRI 3.0, SanDiego-2011 and Li-2004 mechanisms present significant poor predictions at higher pressures. This investigation is contrary to the previous studies. Reaction pathway and sensitivity analysis indicated that reaction R10: H + O2 (+M) <=> HO2 (+M) is of significant important pressure-dependent reaction in controlling of hydrogen oxidation. It is inferred that significant differences of their rate constants among various mechanisms induce the difference of performance on hydrogen ignition predictions.

Shock Tube Study on Auto-ignition Delay of Kerosene Aerosol and its Cracked Mixture

Study on Ignition Delay of Kerosene Aerosol in Shock Tube

Shock Tube Study on Auto-Ignition Characteristics of Kerosene/air Mixtures

The ignition delay measurement of atomized kerosene air mixture in an aerosol shock tube

Aerosol Shock Tube Designed for Ignition Delay Time Measurements of Low-Vapor-Pressure Fuels and Auto-Ignition Flow-Field Visualization

Ignition Delay Times of Kerosene (Jet-A)/Air Mixtures

Shock Tube Study of Ignition-Delay Measurements and Kinetic Mechanism Research for Syngas

Shock-Tube Study on Ethylcyclohexane Ignition

Shock tube ignition delay time measurements in propane/O2/argon mixtures at near-constant-volume conditions

Experimental Study of the Ignition of a Stoichiometric Propylene–Oxygen–Argon Mixture Behind a Reflected Shock Wave

Experimental Investigation of Ignition Delay Time of N-Heptane in Shock Tube

Experimental Investigation on Auto-Ignition Characteristics of Kerosene Spray Flames

Shock Tube Measurements and Kinetic Study on Ignition Delay Times of Lean DME/n-Butane Blends at Elevated Pressures

Shock Tube Measurements of Jet and Rocket Fuels

Non-uniform Ignition Behind a Reflected Shock and Its Influence on Ignition Delay Measured in a Shock Tube

Shock Tube and Kinetic Study of C2H6/H2/O2/Ar Mixtures at Elevated Pressures

Shock Tube Study of Methylcyclohexane Ignition over a Wide Range of Pressure and Temperature

To study on ignition characteristics of syngas mixtures by shock tube

Study on ignition delay of multi‐component syngas using shock tube

Shock Tube Study on Ignition Delay of Hydrogen and Evaluation of Various Kinetic Models

Shock Tube Study on Propanal Ignition and the Comparison to Propane, N-Propanol, and I-Propanol