Crystal Growth and Characterization of Thulium Calcium Oxyborate High-Temperature Piezoelectric Crystals

Shuai Hou,Fapeng Yu,Yanqing Liu,Shujun Zhang,Qingming Lu,Shenglai Wang,Xian Zhao

DOI: https://doi.org/10.1039/c4ce01830c

IF: 3.756

2015-01-01

CrystEngComm

Abstract:High-temperature stability of electromechanical and piezoelectric properties was obtained for TmCa4O(BO3)3 crystals over the temperature range of 20–900 °C.

What problem does this paper attempt to address?

Ultra-high Curie Temperature Transparent Piezoelectric Bi Doped Ca2Nb2O7 Single Crystals

Xiaohan Wang,Fangfei Li,Wenwei Ge,Enwei Sun,Wenting Tang,Xiaohe Li,Peng Li,Xinyang Li,Xin Wang,Liang Li,Qiang Zhou,Tian Cui

DOI: https://doi.org/10.1016/j.ceramint.2023.11.064

IF: 5.532

2024-01-01

Ceramics International

Abstract:Ca2Nb2O7 is a promising material for high-temperature piezoelectric applications due to its ultra-high Curie temperature, which makes it a suitable candidate for use in harsh environments. However, their piezoelectric performance needs improvement. Here, through chemical engineering methods, we have successfully grown Bi3+ doped Ca2Nb2O7 single crystals using the optical floating zone technique. The Ca1.94Bi0.06Nb2O7 single crystals achieved better high-temperature stability, transparency and a higher piezoelectric constant of 12.8 pC/N at 298 K and 20.0 pC/N at 660 K. In addition to the dopant effects, mechanisms for enhancing the piezoelectric properties of perovskite-like layer structure (PLS) materials have been identified, highlighting the significant contribution of the NbO6 octahedron and interlayer ions. These findings offers valuable insights into improving the performance of PLS materials, which is crucial for promoting their practical applications as high-temperature lead-free piezoelectric materials.
Enhancement of the temperature stabilities in yttrium doped (Ba 0.99Ca 0.01)(Ti 0.98Zr 0.02)O 3 ceramics

Wei Li,Jigong Hao,Wangfeng Bai,Zhijun Xu,Ruiqing Chu,Jiwei Zhai

DOI: https://doi.org/10.1016/j.jallcom.2012.03.110

IF: 6.2

2012-01-01

Journal of Alloys and Compounds

Abstract:Lead-free (Ba 0.99Ca 0.01)(Ti 0.98Zr 0.02)O 3 + x mol% (x = 0-0.8) Yttrium ceramics (BCZT-Y) were prepared using the solid-state reaction technique. High piezoelectric coefficient of d 33 = 360 pC/N and planar electromechanical coupling factor of k p = 42% were obtained at x = 0.2. Furthermore, greatly enhanced temperature stabilities of the piezoelectric properties were obtained in the temperature range from 20 to 100 °C, in which the BCZT-Y ceramics exhibited pure tetragonal phase. With the increase of Yttrium content, the orthorhombic-tetragonal phase transition shifted toward low temperature, while Curie temperature (T C) maintained at about 120 °C. The results indicate that the BCZT-Y ceramics are promising lead-free materials for practical applications. © 2012 Elsevier B.V. All rights reserved.
Enhanced Temperature Stability in Tb-doped (ba0.99ca0.01)(ti0.98zr0.02)o3 Lead Free Ceramics

Jinghan Gao,Qiang Li,Hairui Liu,Jaeshik Shim,Qingfeng Yan,Yiling Zhang,Xiangcheng Chu

DOI: https://doi.org/10.1016/j.ceramint.2014.10.071

IF: 5.532

2014-01-01

Ceramics International

Abstract:Lead-free (Ba0.99Ca0.01)(Ti0.98Zr0.02)O3 (BCZT)+xmol% Tb (x=0–0.6) ceramics were prepared using a solid-state reaction technique. Phase structure, dielectric constant, ferroelectricity and temperature-dependent piezoelectric coefficient were explored. With an increasing Tb content, the orthorhombic–tetragonal phase transition temperature (TO–T) shifted to lower temperature while its Curie temperature (Tc) remained at 130°C. The temperature stability of piezoelectric coefficient (d33) could be enhanced from 30 to 120°C in Tb-doped BCZT ceramics. A piezoelectric coefficient of d33=542pm/V was obtained at x=0.2 with low temperature-dependent degradation from 30 to 120°C. The results indicated that Tb-doped BCZT ceramics could be a promising candidate for commercial purposes.
Characterization of high temperature piezoelectric crystals with an ordered langasite structure

Shujun Zhang,Yanqing Zheng,Haikuan Kong,Jun Xin,Eric Frantz,Thomas R. Shrout

DOI: https://doi.org/10.1063/1.3142429

IF: 2.877

2009-06-01

Journal of Applied Physics

Abstract:Piezoelectric single crystals with the ordered langasite structure A3BC3D2O14, including Sr3TaGa3Si2O14, Sr3NbGa3Si2O14, Ca3TaGa3Si2O14, and Ca3TaAl3Si2O14 (CTAS), were studied as a function of temperature, up to 900 °C. The dielectric permittivity ε11 and piezoelectric coefficient d11 of the ordered crystals were found to be on the orders of 12–16 and 4–5 pC/N, respectively, slightly lower than langasite (La3Ga5SiO14-LGS) or langanite (La3Ga5.5Nb0.5O14) crystals which possess a disordered structure. The mechanical quality factor Q and electrical resistivity ρ, however, were found to be greatly improved at elevated temperatures ≥500 °C, being one to two orders of magnitude higher, due to cation ordering. Of particular interest is the CTAS crystal, in which, the Ga cations are totally replaced by low cost Al cations. Together with its thermally stable piezoelectric properties and high electrical resistivity, CTAS crystals offer a competitive material for high temperature sensing applications.

physics, applied
Facile Preparation and Performance of Novel High-Tc Xbi(ni1/2ti1/2)o3-(1-x)pb(zr1/2ti1/2)o3 Piezoceramics

Wanwan Ji,Shuai Feng,Bijun Fang,Xiangyong Zhao,Shuai Zhang,Jianning Ding,Haosu Luo

DOI: https://doi.org/10.1016/j.cap.2017.12.007

IF: 2.856

2018-01-01

Current Applied Physics

Abstract:High Curie temperature (TC) xBi(Ni1/2Ti1/2)O3-(1-x)Pb(Zr1/2Ti1/2)O3 (xBNT-(1-x)PZT, BNT-PZT) piezoelectric ceramics were prepared by the conventional ceramic processing. The composition-induced morphotropic phase boundary (MPB) and its influences on structure and electrical performance were investigated. The synthesized BNT-PZT ceramics exhibit rather pure perovskite structure, and densified microstructure morphology with uniform elementals distribution in both grains and grain boundaries. With increasing the content of Bi(Ni1/2Ti1/2)O3 (BNT), crystal structure of the BNT-PZT ceramics transform from tetragonal phase to rhombohedral phase, and dielectric response peaks change from narrow shape to very broad shape but all presenting dielectric frequency dispersion. The diffused and relaxation dielectric behavior can be fitted well by the quadratic law, and the Vogel-Fulcher law fitting provides additional information on the relaxation characteristic. The MPB effects are confirmed further by ferroelectric and piezoelectric properties measurements. High-TC combined with excellent piezoelectric performance can be realized in the BNT-PZT system, which presents promising applications in geothermal exploration, aerospace and related elevated temperatures fields.
A new (1 - X)Pb(Lu1/2Nb1/2)O3-xPbTiO 3 binary ferroelectric crystal system with high Curie temperature

Ying Liu,Xiuzhi Li,Zujian Wang,Chao He,Tao Li,Liaodong Ai,Tao Chu,Dongfang Pang,Xifa Long

DOI: https://doi.org/10.1039/c2ce26444g

IF: 3.756

2013-01-01

CrystEngComm

Abstract:A series of new (1 - x)Pb(Lu1/2Nb1/2)O-3-xPbTiO(3) (PLN-xPT) binary ferroelectric crystals with high Curie temperature have been successfully obtained firstly by top-seed solution growth technique. A solid-state phase diagram in the low temperature range has been established based on the form of single crystals, which reveals a morphotropic phase boundary (MPB) in the range of 49-51% PT. The polarized light microscope analysis also confirms the coexistence of rhombohedral and tetragonal phase within the MPB. Furthermore, those compositions within MPB exhibit good comprehensive piezoelectric properties. For example, the crystal with composition PLN-0.49PT, showing high Curie temperature T-c = 360 degrees C and high rhombohedral-tetragonal phase transition temperature T-RT = 110 degrees C, and the piezoelectric coefficient d(33), electromechanical coupling coefficient k(33), coercive field E-c and remanent polarization P-r are found to be 1630 pC N-1, 81%, 13.8 kV cm(-1) and 26.6 mu C cm(-2), respectively. The large coercive field and high T-c make it a promising candidate for high power transducers in a wider temperature range.
Investigation on Microscopic Mechanisms of High-Curie Temperature PMN-PH-PT Piezoelectric Ceramics

Rongfeng Zhu,Bijun Fang,Xiangyong Zhao,Shuai Zhang,Xiaolong Lu,Jianning Ding

DOI: https://doi.org/10.1080/07315171.2021.1971008

2021-01-01

Ferroelectrics Letters Section

Abstract:High-Curie temperature (T-C) piezoelectric ceramics 0.15Pb(Mg1/3Nb2/3)O-3-0.38PbHfO(3)-0.47PbTiO(3) (0.15PMN-0.38PH-0.47PT) were fabricated via the citrate method, which shows pure perovskite structure. The ceramics have composition locating at the rhombohedral side around the morphotropic phase boundary (MPB), and present enhanced electrical properties as compared with those prepared by the solid-state reaction method via the columbite precursor technique. Temperature-dependent Raman spectroscopy not only proves the occurrence of the ferroelectric to paraelectric phase transition around T-C, but also detects the successive phase symmetry transitions, which correlate with the polar nanoregions (PNRs) or the coexistence of multiple ferroelectric phases. Large quantities of fine stripe nanoscale ferroelectric domains are observed by piezoresponse force microscopy (PFM) in the 0.15PMN-0.38PH-0.47PT ceramics, which form the larger micron island domains. Temperature-dependent Raman spectra and PFM results indicate that the excellent dielectric, ferroelectric and piezoelectric properties of the 0.15PMN-0.38PH-0.47PT ceramics can be attributed to either the existence of the PNRs with low symmetry or the multiple-ferroelectric-phases coexistence around room temperature and the fine stripe ferroelectric domains.
Temperature Stability in Dy-Doped (Ba0.99ca0.01)(ti0.98zr0.02)o-3 Lead-Free Ceramics with High Piezoelectric Coefficient

Wei Li,Zhijun Xu,Ruiqing Chu,Peng Fu,Guozhong Zang

DOI: https://doi.org/10.1111/j.1551-2916.2011.04744.x

IF: 4.186

2011-01-01

Journal of the American Ceramic Society

Abstract:We report on excellent temperature stability of the Dy‐doped (Ba0.99Ca0.01)(Ti0.98Zr0.02)O3 (BCZT‐D) ceramics with high piezoelectric coefficient of d33 = 366 pC/N and planar electromechanical coupling factor of kp = 43.0%. Meanwhile, Curie temperature of the BCZT‐D ceramics is found to be 125°C. Greatly improved temperature stability of the electromechanical coupling coefficients is found over a common usage temperature range between 20°C and 100°C, in which the BCZT‐D ceramics exhibit pure tetragonal phase. The results indicate that the BCZT‐D ceramics are promising lead‐free materials for practical applications.
Composition Designing and Sintering Behavior Tailoring in [(ba1−xcax)0.995eu0.005](ti1−yhfy)o3 Multifunctional Piezoceramics

Shanshan Zhang,Bijun Fang,Shuai Zhang,Xiaolong Lu,Jianning Ding

DOI: https://doi.org/10.1016/j.jallcom.2021.160891

IF: 6.2

2021-01-01

Journal of Alloys and Compounds

Abstract:[(Ba1-xCax)(0.995)Eu-0.005](Ti1-yHfy)O-3 (B1-xCxT1-yHy-Eu) lead-free ceramics were fabricated by conventional solid-state method, in which the effects of sintering temperature and the ratios of Ba/Ca and Ti/Hf cations around the morphotropic phase boundary (MPB) on the electrical and fluorescent properties were explored. Rather pure perovskite structure B1-xCxT1-yHy-Eu ceramics with densified microstructure and high density are obtained, which locate around the MPB region and show dependency on compositions and sintering conditions. Complex ferroelectric characteristic is confirmed by dielectric performance measurement and dielectric behavior fitting. Enhanced ferroelectric and piezoelectric properties can be attributed to the donor doping characteristic induced by Eu doping, which engenders donor point defects Eu-Ba/Ca*. Extremum piezo-luminescence figure of merit FPC-PLI appears in the sintered B1-xCxT1-yHy-Eu ceramics, in which the 1450 degrees C sintered [(Ba0.86Ca0.14)(0.995)Eu-0.005](Ti0.9Hf0.1)O-3 ceramics exhibit the most outstanding multi-functional performance. The high-temperature conductance mechanism of the B1-xCxT1-yHy-Eu ceramics can be attributed to the oxygen vacancies produced by the evaporation of cations during sintering process. (C) 2021 Published by Elsevier B.V.
Enhancing Electrical Properties of High-Curie Temperature Piezoelectric Ceramics BNT-PZT and Their Mechanism

Wanwan Ji,Bijun Fang,Xiangyong Zhao,Shuai Zhang,Xiaolong Lu,Jianning Ding

DOI: https://doi.org/10.1016/j.cap.2019.09.002

IF: 2.856

2019-01-01

Current Applied Physics

Abstract:Due to the urgent demands for high-Curie temperature (T-C/T-m) piezoelectric materials in geothermal exploration, aerospace and related fields, high-T-C/T-m ferroelectrics have attracted booming research attention. The high-T-m 0.25Bi(Ni1/2Ti1/2)O-3-0.75 Pb(Zr1/2Ti1/2)O-3 (0.25BNT-0.75PZT) ceramics were prepared by solid-state sintering method and via partial oxalate route, where the 0.25BNT-0.75PZT ceramics prepared via the partial oxalate route exhibit better electrical properties (T-m = 232 degrees C (10 kHz), epsilon(m) = 10963, P-r = 26.14 mu C/cm(2), E-c = 15.61 kV/cm, d(33) = 521 pC/N, d(33)* = 553.3 pm/V, K-p = 47.1%, and Q(m) = 21.6). The nano-scale domain configuration of the ceramics was revealed by piezoelectric force microscopy (PFM), and the relationship between the micro-structure and macro-electrical properties was analyzed. The ferroelectric phase transition mechanism was studied by temperature dependent Raman spectroscopy. The reduction of energy barrier of lattice distortion and polarization deflection is caused by nanometer-sized domain structure, low symmetric polar nano-regions and/or coexistence of multi-ferroelectric phases, contributing to the excellent electrical properties of the 0.25BNT-0.75PZT ceramics prepared via the partial oxalate route.
Modified Pb(Mg 1/3 Nb 2/3 )O 3 ‐PbZrO 3 –PbTiO 3 ceramics with high piezoelectricity and temperature stability

Pengbin Wang,Qinghu Guo,Fei Li,Fangquan Xia,Hua Hao,Huajun Sun,Hanxing Liu,Shujun Zhang

DOI: https://doi.org/10.1111/jace.17741

IF: 4.186

2021-03-24

Journal of the American Ceramic Society

Abstract:There is a great demand to develop ferroelectric ceramics with both high piezoelectric coefficient and broad temperature usage range for emerging electromechanical applications. Herein, a series of Sm3+ doped 0.25Pb(Mg1/3Nb2/3)O3‐(0.75−x)PbZrO3‐xPbTiO3 ceramics were fabricated by solid‐state reaction method. The phase structure, dielectric and piezoelectric properties were investigated, where the optimum piezoelectric coefficient d33=745 pC/N and electromechanical coupling factor k33 = 0.79 were obtained at the morphotropic phase boundary composition x = 0.39, with good Curie temperature TC of 242 °C. Of particular importance is that high temperature stability of the piezoelectric and field‐induced strain were obtained over the temperature range up to 230 °C for the tetragonal compositions of x = 0.40. The underlying mechanism responsible for the high piezoelectricity and temperature stability is the synergistic contribution of the MPB and local structural heterogeneity, providing a good paradigm for design of high‐performance piezoelectric materials to meet the challenge of piezoelectric applications at elevated temperature.

materials science, ceramics
Crystal Growth, Optical, Thermal and Piezoelectric Properties of HoCa4O(BO3)3 Crystal

Pingzhang Yu,Xiaobo Pan,Guangda Wu,Yanqing Liu,Fapeng Yu,Zhengping Wang,Xinguang Xu

DOI: https://doi.org/10.1039/d1ce00816a

IF: 3.756

2021-01-01

CrystEngComm

Abstract:High-quality crystals of HoCa4O(BO3)3 were grown by the Czochralski method. The optical, thermal and piezoelectric properties were investigated.
Enhanced Piezoelectricity in Broad Composition Range and the Temperature Dependence Research of (ba1−xcax)(ti0.95sn0.05)o3 Piezoceramics

Mingli Chen,Zhijun Xu,Ruiqing Chu,Hong Qiu,Min Li,Yong Liu,Lin Shao,Shuai Ma,Wanbin Ji,Wei Li,Shuwen Gong,Guorong Li

DOI: https://doi.org/10.1016/j.physb.2013.10.014

IF: 2.988

2013-01-01

Physica B Condensed Matter

Abstract:BaTiO3-based (Ba1−xCax)(Ti0.95Sn0.05)O3 (x=0–0.07) lead-free piezoceramics were fabricated by a conventional solid state reaction technique. The phase structure and electrical properties of the as-prepared ceramics were researched. The temperature (TO−T) of the orthorhombic–tetragonal phase transition dielectric peak shifts toward lower temperature with increasing Ca content and the Curie temperature (TC) almost does not shift. At room temperature, the polymorphic phase transition (PPT) from the orthorhombic phase to tetragonal phase is jointly identified by the εr–T curves and XRD patterns. The piezoelectricity of the ceramics is enhanced due to the polymorphic phase transition and the best piezoelectricity is obtained at x=0.02 with d33=464pC/N and kp=43.1%. The piezoelectricity is enhanced in the broad composition range x=0.01–0.06 with d33>400pC/N and kp>41% which is beneficial for the industrial production. The temperature aging properties of piezoelectric constant d33, planar electromechanical coupling factor kp, the elastic compliance constant S11E and the radial frequency constant Nd are also researched.
Phase evolution and thermal stability of high Curie temperature BiScO$_3$-PbTiO$_3$-Pb(Cd${1/3}$Nb$_{2/3}$)O$_3$ ceramics near MPB

Zhencheng Lan,Kaiyuan Chen,Xiafeng He,Shuo Zhou,Xiande Zheng,Jia Liu,Liang Fang,Xiuyun Lei,Dawei Wang,Biaolin Peng,Laijun Liu

DOI: https://doi.org/10.1063/1.5126065

2019-08-28

Abstract:Piezoelectric and ferroelectric ceramics with a high Curie temperature (Tc) have attracted a growing attention owning to their applications under severe environments. In this work, phase structure, dielectric, ferroelectric and piezoelectric properties of (0.975-x)BiScO3-xPbTiO3-0.025Pb(Cd1/3Nb2/3)O3 ceramics (x = 0.58-0.64) were studied. A composition-induced structural transformation occurs from rhombohedral phase to tetragonal phase through an intermediate monoclinic phase with the increasing PT concentration. The relationship between structure and electrical properties of the system were discussed. The BS-xPT-PCN system near the morphotropic phase boundary (x = 0.62) exhibits excellent piezoelectric and ferroelectric performances with d33 = 508 pC/N, kp = 56%, and Pr = 40 uC/cm2. The high-temperature piezoelectricity of the sample with MPB (x = 0.62) was characterized by an in situ XRD. The excellent thermal stability of the crystal structure and the piezoelectric property indicate that the BS-xPT-PCN system is a promising candidate for high temperature piezoelectric applications.

Materials Science
Thermally Enhanced Piezoelectricity Via the Superstructure in Ca2Nb2O7 Single-Crystals with Ultra-High Curie Temperature

Xiaohan Wang,Qiang Zhou,Fangfei Li,Chen Wu,Meiqi Gong,Songying He,Xinyang Li,Enwei Sun,Wenwei Ge,Peng Li,Liang Li,Tian Cui

DOI: https://doi.org/10.1039/d2ta03412c

IF: 11.9

2022-01-01

Journal of Materials Chemistry A

Abstract:Due to the requirements of sustainable development and the widening application range, it is very necessary to develop lead-free eco-friendly piezoelectric materials with ultra-high Curie temperatures (T-c). The perovskite-like layered structure (PLS) Ca2Nb2O7 is considered a potential candidate with ultra-high T-c (1773 K). Herein, we prepared Ca2Nb2O7 single-crystals by the optical floating zone (OFZ) method. The piezoelectric constant d(33) of Ca2Nb2O7 along the b-axis reaches 10.4 pC N-1 at room temperature and the d(33) is enhanced to 15.2 pC N-1 when the temperature increases from 273 to 750 K. Furthermore, the origin of piezoelectricity as well as the mechanism of the orientation-dependent and thermally enhanced d(33) of Ca2Nb2O7 were clarified based on the microstructure, lattice structure, and vibration by completely characterizing the corresponding parameters.
High‐performance bismuth titanate‐ferrite (Bi5Ti3FeO15) for high‐temperature piezoelectric applications

Qian Wang,En‐Meng Liang,Chun‐Ming Wang

DOI: https://doi.org/10.1111/jace.19768

IF: 4.186

2024-02-24

Journal of the American Ceramic Society

Abstract:Advancing the development of high‐temperature piezoelectric sensors requires high‐performance piezoelectric materials with high Curie temperatures, wherein the charge signals can be efficiently collected at elevated temperatures. The bismuth layer‐structured ferroelectric (BLSF) bismuth titanate‐ferrite (Bi5Ti3FeO15, BTF) has recently attracted considerable attention because of its high Curie temperature (TC) of ∼761°C. However, the piezoelectric properties of BTF‐based compounds have not been extensively investigated because of their extremely poor piezoelectric performances and low electrical resistivities at elevated temperatures. Herein, tungsten‐substituted BTF (BTF‐100xW) ceramics were synthesized using a solid‐state reaction method. X‐ray diffraction refinement results confirmed the lattice distortion of the BO6 octahedron, while piezoelectric force microscopy images verified an increase in the domain wall density with tungsten modification, both of which contribute to significant enhancement of the piezoelectric properties of BTF‐100xW as intrinsic and extrinsic contributions, respectively. Remarkably, BTF‐3W exhibits a high TC of 793°C and a large piezoelectric constant (d33) of 24.3 pC/N, which is over three times that of BTF (7.1 pC/N). Importantly, the substitution of tungsten decreases the concentration of oxygen vacancies, increases the direct current electrical resistivity, and improves the electrical homogeneity at high temperatures, resulting in extremely stable piezoelectric and electromechanical properties at high temperatures, with a high in‐situ relative d33 of >90% at 400°C and a small variation in the electromechanical coupling factor (kp) of <8% at temperatures up to 450°C. These results suggest that the tungsten‐substituted BTF is a potential candidate for high‐temperature piezoelectric ceramics, and is a promising material for applications in high‐temperature piezoelectric sensors.

materials science, ceramics
High Piezoelectric D33 Coefficient in (ba1−xcax)(ti0.98zr0.02)o3 Lead-Free Ceramics with Relative High Curie Temperature

Wei Li,Zhijun Xu,Ruiqing Chu,Peng Fu,Guozhong Zang

DOI: https://doi.org/10.1016/j.matlet.2010.07.042

IF: 3

2010-01-01

Materials Letters

Abstract:Lead-free (Ba1−xCax)(Ti0.98Zr0.02)O3 (x=0–0.04) ceramics were prepared successfully using a solid-state reaction technique. The polymorphic phase transitions (PPT) from orthorhombic to tetragonal phase around room temperature were identified in the composition range of 0<x<0.03. High piezoelectric coefficient of d33=375pC/N and planar electromechanical coupling factor of kp=44.1% were obtained for the samples at x=0.01. With the increase of Ca content, the orthorhombic–tetragonal phase transitions shifted towards room temperature, while relative high Curie temperature (TC) was still maintained about 115°C.
Tetragonal (ba, Ca) (zr, Ti)O3 Textured Ceramics with Enhanced Piezoelectric Response and Superior Temperature Stability

Qiangwei Kou,Bin Yang,Yuan Sun,Shuai Yang,Linjing Liu,Hang Xie,Yunfei Chang,Shantao Zhang,Fei Li

DOI: https://doi.org/10.1016/j.jmat.2021.08.006

IF: 8.589

2022-01-01

Journal of Materiomics

Abstract:Lead-free ceramics with both high piezoelectric response and good temperature stability are urgently demanded for electromechanical conversion devices. Unfortunately, owing to coexistence of polymorphic phases near room temperature (RT), enhanced piezoelectric properties were usually achieved with occurrence of strong temperature dependence in modified BaTiO3 (BT)-based ceramics. In this work, we demonstrate that tailoring grain orientations of tetragonal BT-based ceramics can effectively produce substantially enhanced and thermally stabilized piezoelectric response. Both <001>c- and <111>c-oriented tetragonal (Ba0.85Ca0.15) (Zr0.05Ti0.95)O3 (BCZT) ceramics with texture degrees F>90% were synthesized via templated grain growth. Interestingly, the ceramics textured along the <001>c polar axis show much higher microscopic and macroscopic piezoelectric properties than those with nonpolar <111>c texture, indicating an “extender” ferroelectricity nature. Compared with randomly oriented samples, the <001>c-oriented ceramics exhibit simultaneously ∼1.6 times higher piezoelectric strain d33∗ (∼760 pm/V), 4.4 times higher piezoelectric figure of merit d33×g33 (8.8 × 10−12 m2/N), and better temperature stability (strain variation ≤5% between RT and 110 °C). Such thermally stabilized strain response can be mainly attributed to wide temperature range of tetragonal phase and stable domain structure. This work provides a promising route for further developing lead-free piezoceramics with high and temperature-insensitive performance, which can greatly broaden their application areas.
Structure Evolution and Electrical Properties of Y3+‐Doped Ba1−xCaxZr0.07Ti0.93O3 Ceramics

Hairui Liu,Qiang Li,Yuanyuan Li,Nengneng Luo,Jaeshik Shim,Jinghan Gao,Qingfeng Yan,Yiling Zhang,Xiangcheng Chu

DOI: https://doi.org/10.1111/jace.12900

IF: 4.186

2014-01-01

Journal of the American Ceramic Society

Abstract:Lead free piezoelectric ceramics of Y3+‐doped Ba1−xCaxZr0.07Ti0.93O3 with x = 0.05, 0.10, and 0.15 were prepared. Composition and temperature‐dependent structural phase evolution and electrical properties of as‐prepared ceramics were studied systematically by X‐ray diffraction, Raman spectroscopy, impedance analyzer, ferroelectric test system, and unipolar strain measurement. Composition with x = 0.10 performs a good piezoelectric constant d33 of 363 pC/N, coercive field Ec of 257 V/mm, remanent polarization Pr of 14.5 μC/cm2, and a Curie temperature Tm of 109°C. High‐resolution X‐ray diffraction was introduced to indicate presence of orthorhombic phase. Converse piezoelectric constant d33* of x = 0.10 composition performed better temperature stability in the range from 50°C to 110°C. That means decreasing orthorhombic–tetragonal phase transition temperature could be an effective way to enlarge its operating temperature range.
High Piezoelectricity and Thermal Stability of Ce-doped CaBi2Nb2O9-based High-Temperature Ceramics

Tao Lin,Wen-Ying Fan,Chuan-Yang Tao,Jun Ma,Bin-Jie Chen,Zhong-Shang Dou,Bing-Lin Shen,Min Ju,Jing-Tong Lu,Mei-Peng Zhong,Yu-Qing Zhou,Mao-Hua Zhang,Wen Gong,Fang-Zhou Yao,Ke Wang

DOI: https://doi.org/10.1016/j.jeurceramsoc.2024.116955

IF: 5.7

2025-01-01

Journal of the European Ceramic Society

Abstract:As the industry advances at a swift pace, the demand for piezoelectric materials that exhibit both exceptional piezoelectric properties and excellent thermal stability is on the rise. However, it remains a significant challenge to achieve a balance between high piezoelectricity and thermal stability in these materials. In this study, the phase structure, microstructure, and thermal stability of Ce-doped CaBi2Nb2O9 (CLBBN-xCe) high-temperature bismuth layer-structured piezoceramics are studied. It is revealed that the CLBBN-0.1Ce ceramics stand out with a piezoelectric coefficient d33 of 21.7 pC/N and a high Curie temperature of 907 degrees C. Furthermore, in situ temperature measurement demonstrates that the d33 has a change rate of 20.8 % from room temperature to 400 degrees C. We found that grain size refinement and domain morphology contribute to excellent electrical properties of the Ce-doped CaBi2Nb2O9-based ceramics. The superior performance of these ceramics suggests they hold great promise for high-temperature applications.

Crystal Growth and Characterization of Thulium Calcium Oxyborate High-Temperature Piezoelectric Crystals

Ultra-high Curie Temperature Transparent Piezoelectric Bi Doped Ca2Nb2O7 Single Crystals

Enhancement of the temperature stabilities in yttrium doped (Ba 0.99Ca 0.01)(Ti 0.98Zr 0.02)O 3 ceramics

Enhanced Temperature Stability in Tb-doped (ba0.99ca0.01)(ti0.98zr0.02)o3 Lead Free Ceramics

Characterization of high temperature piezoelectric crystals with an ordered langasite structure

Facile Preparation and Performance of Novel High-Tc Xbi(ni1/2ti1/2)o3-(1-x)pb(zr1/2ti1/2)o3 Piezoceramics

A new (1 - X)Pb(Lu1/2Nb1/2)O3-xPbTiO 3 binary ferroelectric crystal system with high Curie temperature

Investigation on Microscopic Mechanisms of High-Curie Temperature PMN-PH-PT Piezoelectric Ceramics

Temperature Stability in Dy-Doped (Ba0.99ca0.01)(ti0.98zr0.02)o-3 Lead-Free Ceramics with High Piezoelectric Coefficient

Composition Designing and Sintering Behavior Tailoring in [(ba1−xcax)0.995eu0.005](ti1−yhfy)o3 Multifunctional Piezoceramics

Enhancing Electrical Properties of High-Curie Temperature Piezoelectric Ceramics BNT-PZT and Their Mechanism

Modified Pb(Mg 1/3 Nb 2/3 )O 3 ‐PbZrO 3 –PbTiO 3 ceramics with high piezoelectricity and temperature stability

Crystal Growth, Optical, Thermal and Piezoelectric Properties of HoCa4O(BO3)3 Crystal

Enhanced Piezoelectricity in Broad Composition Range and the Temperature Dependence Research of (ba1−xcax)(ti0.95sn0.05)o3 Piezoceramics

Phase evolution and thermal stability of high Curie temperature BiScO$_3$-PbTiO$_3$-Pb(Cd${1/3}$Nb$_{2/3}$)O$_3$ ceramics near MPB

Thermally Enhanced Piezoelectricity Via the Superstructure in Ca2Nb2O7 Single-Crystals with Ultra-High Curie Temperature

High‐performance bismuth titanate‐ferrite (Bi5Ti3FeO15) for high‐temperature piezoelectric applications

High Piezoelectric D33 Coefficient in (ba1−xcax)(ti0.98zr0.02)o3 Lead-Free Ceramics with Relative High Curie Temperature

Tetragonal (ba, Ca) (zr, Ti)O3 Textured Ceramics with Enhanced Piezoelectric Response and Superior Temperature Stability

Structure Evolution and Electrical Properties of Y3+‐Doped Ba1−xCaxZr0.07Ti0.93O3 Ceramics

High Piezoelectricity and Thermal Stability of Ce-doped CaBi2Nb2O9-based High-Temperature Ceramics