Abstract:Nonthermal plasma (NTP)-enhanced CO catalytic oxidation over CuOx@gamma-Al2O3 was investigated in a coaxial dielectric barrier discharge reactor at ambient temperature under dry and humid conditions. The CO conversion of 100% was obtained at about 600 J/L under dry conditions. CuOx@gamma-Al2O3 had a stronger resistance to water in the NTP-catalytic system in comparison to the thermal-catalytic system. The CO conversion kept stable under humid conditions (RH = 80%) within 10 h in plasma mode, whereas the CO conversion decreased by 12% in thermal mode. It is found that the catalyst's bed temperature inside the NTP reactor at 600 J/L was not high enough to completely oxidize CO into CO2, suggesting that CO plasma-catalytic oxidation was not dependent only on the thermal activation caused by the plasma-induced heating. In addition, the CuOx@gamma-Al2O3 catalysts after plasma exposure for different times were characterized by N-2 adsorption-desorption, X-ray diffraction, scanning electron microscopy-energy-dispersive X-ray, H-2-TPR, O-2-TPD, and X-ray photoelectron spectroscopy. The results show that plasma treatment decreased the ratio of Cu+/Cu2+ and the surface-adsorbed oxygen species of the CuOx@gamma-Al2O3 catalyst. On the basis of the characterization of virgin and plasma-treated CuOx@gamma-Al2O3 catalysts as well as the catalytic performance tests, a plausible mechanism of plasma-assisted catalysis of CO is discussed. The Eley-Rideal and Mars-van Krevelen mechanism besides the Langmuir-Hinshelwood mechanism may be responsible for enhancing carbon monoxide oxidation in the plasma-catalytic system. This result brings a new insight into utilizing plasma activation to effectively enhance the catalytic performance.

Catalyst screening for acetone removal in a single-stage plasma-catalysis system

Investigation of Hybrid Plasma-Catalytic Removal of Acetone over CuO/γ-Al 2 O 3 Catalysts Using Response Surface Method

Plasma Induced Toluene Decomposition on Alumina-Supported Mn-Based Composite Oxides Catalysts

Plasma-catalytic Removal of a Low Concentration of Acetone in Humid Conditions

Synergy Study for Plasma-Facilitated $\hbox{c}_{2} \hbox{h}_{4}$ Selective Catalytic Reduction of $\hbox{no}_{x}$ over $\Hbox{ag}/\gamma\hbox{-}\Hbox{al}_{2}\hbox{o}_{3}$ Catalyst

Synergy study for plasma-facilitated C2H4 selective catalytic reduction of NOx over Ag/γ-Al2O3 catalyst

Removal of NO by CH4 Using CuO/TiO2-γ-Al2O3 Catalyst in Combination with Plasma

Role of Nitrogen-Containing Organic Compound in Plasma Exhaust Treatment

Synergy Study for Plasma-Facilitated Catalytic Reduction of NOx

Study on the degradation of VOCs in a plasma-catalyst hybrid reactor

Direct Oxidation of Methane to Methanol over Cu-Based Catalyst in an AC Dielectric Barrier Discharge

Nonthermal Plasma-Assisted Catalytic Oxidation of Carbon Monoxide over CuOx@γ-Al2O3: Understanding Plasma Modification of Catalysts and Plasma–Catalyst Synergy

Removal of NO by CH4 using CuO/TiO2-gamma-Al2O3 catalyst in combination with

Refluxing-coprecipitation to synthesize Fex−Mny/γ-Al2O3 catalyst for toluene removal in a nonthermal plasma-catalysis reactor

Application of In-Plasma Catalysis and Post-Plasma Catalysis for Methane Partial Oxidation to Methanol over a Fe2O3-CuO/γ-Al2O3 Catalyst

Low Temperature Ozonation of Acetone by Transition Metals Derived Catalysts: Activity and Sulfur/Water Resistance

Process optimization of plasma-catalytic formaldehyde removal using MnOx–Fe2O3 catalysts by response surface methodology

Enhanced performance for plasma-catalytic oxidation of ethyl acetate over La1-xCexCoO3+δ catalysts

Plasma-catalyzed combined dynamic wave scrubbing: A novel method for highly efficient removal of multiple pollutants from flue gas at low temperatures

Post-plasma Catalytic Removal of Methanol over Mn–Ce Catalysts in an Atmospheric Dielectric Barrier Discharge

Plasma-assisted CuO/CeO2/TiO2-γ-Al2O3 Catalysts for NO + CH4 Reaction and NO Temperature Programmed Desorption Studies