Abstract:Cyclic loading behavior, such as cyclic bending, is unavoidably involved in various forming processes and the service of end products. Understanding the mechanical behavior of magnesium (Mg) alloys under cyclic bending is essential for promoting their application. Despite existing research, the microscopic mechanisms at play during cyclic bending, specifically the slip and twinning-de-twinning (TDT), warrant further exploration, which is the innovative focus of our study. To address this need, cyclic bending tests were performed on an extruded AZ31 Mg plate with the in-situ digital-image-correlation (DIC) technology. And the texture evolution was determined through electro backscattered diffraction (EBSD) measurements. Concurrently, the crystal-plasticity-based bending-specific approach, EVPSC-BEND, incorporating the TDT scheme, is utilized to interpret the mechanisms involved in cyclic bending. The impact at the macroscopic level is manifested in asymmetric cyclic moment-curvature curves, stress-strain distribution, and shifting of the neutral layer. The developed textures at different regions of the beam and the twin volume fraction distribution further directly illustrate twinning-de-twinning behaviors. Particularly, the upper and lower halves of the beam experience very distinct cyclic behaviors simultaneously. The upper half experiences a twinning, detwinning, and twinning cycle, while the lower half experiences a twin-free, twinning, and detwinning cycle. Additionally, through modeling the cyclic bending with different initial textures, the strong texture dependence has been revealed. The behaviors of magnesium alloy beam under cyclic bending discovered in this work can shed light on the application of Mg alloys, such as forming processes and service of end product.

In-situ investigation on the microstructure evolution and plasticity of two magnesium alloys during three-point bending

On the inhomogeneous deformation behavior of magnesium alloy beam subjected to bending

Microstructure Evolution and Mechanical Behavior of AZ31 Magnesium Alloy Sheet with Bimodal Texture under Bending Deformation

Mechanical responses and deformation mechanisms in the AZ31 magnesium alloy during cyclic bending

In-situ Analysis of Microscopic Plastic and Failure Behaviors of Extruded Magnesium Alloy

Influence of Continuous Bending Process on Texture Evolution and Mechanical Properties of AZ31 Magnesium Alloy

<i>In</i>-<i>situ</i> investigation on the microstructure evolution of Mg-2Gd alloys during the V-bending tests

Deformation Mechanisms of Magnesium Alloys with Rare-Earth and Zinc Additions under Plane Strain Compression

Towards High Ductility in Magnesium Alloys - the Role of Intergranular Deformation

Superplastic Behavior and Microstructural Evolution in a Commercial Mg-3Al-1Zn Magnesium Alloy.

Mechanical Behavior and Microstructure Evolution of a Rolled Magnesium Alloy AZ31B under Low Stress Triaxiality

Superplastic behavior and microstructural evolution in a commercial Mg-3Al-1Zn magnesium alloy : Superplasticity and its applications

Microstructure and Formability Evolutions of AZ31 Magnesium Alloy Sheets Undergoing Continuous Bending Process

Theoretical Calculation of Schmid Factor and Its Application under High Strain Rate Deformation in Magnesium Alloys

Effect of Stretch Bending on the Microstructure and Mechanical Properties of AZ31 Magnesium Alloy

In-situ EBSD analysis of microstructural evolution and damage behavior of Mg-Al-Ca-Mn alloys with different extrusion ratios

Enhancement of Tensile Ductility and Stretch Formability of AZ31 Magnesium Alloy Sheet Processed by Cross-Wavy Bending

Microstructure and Texture Evolution of Mg-3Zn-1Al Magnesium Alloy During Large-Strain Electroplastic Rolling

Investigation on the inhomogeneous deformation of magnesium alloy during bending using an advanced plasticity model

The activation of twinning and texture evolution during bending of friction stir welded magnesium alloys

The Electroplastic Effect on the Deformation and Twinning Behavior of AZ31 Foils During Micro-Bending Tests