Abstract:The development of excellent performance coarse-grained WC-Co cemented carbides has emerged as a hot topic for cutting tools, drills, molds, wear-resistant parts, etc. In this study, the WC powder was coated by Co and La 2 O 3 simultaneously using a new coprecipitation strategy, and its beneficial effects on the densification, microstructure and mechanical properties of WC-10Co was systematically investigated. Firstly, due to the successful introduction of La 2 (C 2 O 4 ) 3 precursor, the surprising transformation of rod-like loosely CoC 2 O 4 to regular-spherical-like dense one was observed, further inducing the dense and uniform coating of La 2 O 3 with Co on the surface of WC after the H 2 reduction treatment. The addition of La 2 O 3 by this way was found to improve the grain uniformity of WC in the sintered cemented carbide, inhibiting the appearance of abnormally grown grains, and preventing the conversion of Co FCC to Co HCP effectively, which should be ascribed to the segregation of La 2 O 3 on the grain boundary of WC, produced pinning effect and inhibited the dissolution and growth of WC grains. The mechanical properties of coarse-grained WC-Co cemented carbides, including hardness, strength, fracture toughness and elastic modulus were systematically investigated, validating the beneficial effects of Co and La co-precipitation apparently. In general, this study presents a new strategy for enhancing the performance of coarse-grained WC-Co cemented carbides by both powder mixing design and grain boundary tailoring.

Investigation on morphology evolution of coarse grained WC–6Co cemented carbides fabricated by ball milling route and hydrogen reduction route

Long-term Ball Milling and Hot Pressing of In-Situ Nanoscale Tungsten Carbides Reinforced Copper Composite and Its Characterization

Enhanced the Mechanical Properties and Corrosion Resistance of Ultra-Coarse Grain WC-8Co Cemented Carbides by the Introduction of Cu and Ni

Effect of particle size and high-energy ball milling time on microstructure and mechanical properties of WC-10Co cemented carbides with plate-like WC grains

Microstructure and mechanical properties of WC–Co-based cemented carbide with bimodal WC grain size distribution

Effects of Ni and Cu Additions on Microstructures, Mechanical Properties and Wear Resistances of Ultra-Coarse Grained WC–6Co Cemented Carbides

Coarse-grained WC–6Co hardmetals with dual-scale and plate-like WC structures fabricated by convention powder metallurgy process

Microstructural Characterization of Nanostructured WC-Co Cemented Carbides

Coprecipitation of co and La 2 O 3 coprecipitation on WC for tailoring the grain distribution and boundary of high-performance coarse-grained WC-10Co cemented carbide

Investigation of the Machined Surface Integrity of WC-High-Entropy Alloy Cemented Carbide

Influence of Powder Structure on the Micro-Hardness and Fracture Toughness of Cold-Sprayed WC-12Co Deposit

WC-18wt.% Co with simultaneous improvements in hardness and toughness derived from nanocrystalline powder

Microstructure Evolution in the Cemented Carbides Wc-Coi. Effect of the C/W Ratio on the Morphology and Defects of the Wc Grains

Microstructure and Mechanical Properties of WC-10wt.%AlCoCrFeNi Cemented Carbides Fabricated by Plasma-Assisted Ball Milling

Role of Co Content on Densification and Microstructure of WC–Co Cemented Carbides Prepared by Selective Laser Melting

Characterizations of Ball-Milled Nanocrystalline WC–Co Composite Powders and Subsequently Rapid Hot Pressing Sintered Cermets

Comparative Study on Microstructure and Mechanical Properties of Coarse-grained WC-based Cemented Carbides Sintered with Ultrafine WC or (W+C) as Additives

Investigation on the transverse rupture strength and relative density of coarse WC-Co cemented carbides by variables search experiment design

Influencing Factors on Hardness and Impact Toughness of the WC-Co Cemented Carbide Studied by Variables Search Method

Enhanced Coarse-Grained WC-Co(Ce) Cemented Carbide Prepared through Co-Precipitation

Effect of carbon content on the properties of inhomogeneous cemented carbides with fine-grained structures produced via one-step transformation