Abstract:An accurate determination of the contact pressure and local sliding in a cold rolling process is an essential step towards the prediction of the roller’s life due to wear damage. This investigation utilized finite element analysis to quantify the local contact pressure and local sliding over the rolling bite in a plate cold rolling process. It was the first study to quantify the local sliding distance in a rolling process using the Finite Element Analysis (FEA). The numerical results indicate that the local contact pressure over the rolling bite demonstrates a hill profile, and the peak coincides with the neutral plane. The local sliding distance over the rolling bite demonstrates a double-peak profile with the two peaks appearing at the forward slip and backward slip zones respectively. The amplitude of sliding distance in the backward slip zone is larger than that in the forward slip zone. A stick zone was confirmed between the forward slip and backward slip zones. According to a parametric study, the local contact pressure and sliding distance decrease when the thickness reduction is reduced or the diameter of the roller is decreased. The location of the neutral plane always presents at the rolling exit side of the rolling bite’s center. The size of the stick zone enlarges and the sizes of slip zones shrink significantly when the friction coefficient is increased. Finally, a novel concept of wear intensity was defined to examine the wear of the roller based on the local contact pressure and local sliding distance. The results show that a two-peak wear response exists in the backward and forward slip zones. The magnitude of the wear in the backward slip zone is larger than that in the forward slip zone. For a given roller and blank material combination, using a smaller thickness reduction, a smaller diameter roller and a higher friction coefficient condition can reduce the wear of the roller for a single rolling cycle. The current paper develops an understanding of rolling contact responses to the wear of the roller in rolling process. The research method can also be applied to study other rolling or sliding wear problems.

On the Elastic Stress Field of Tilting Roller Pairs Considering Thermal Elastohydrodynamic Lubrication

Study on Subsurface Stress of Tilting Roller Considering EHL Effect

EHL Properties of Roller Contacts and Its Application Part Ⅱ: A Numerical Analysis of EHL for Engineering Logarithmic Roller

Roller's Deformation Analysis under Different Thermal and Mechanical Conditions

Experimental Study On Thermal Effect Of Tilted Roller Pairs In Rolling/Sliding Contacts

Mixed Elastohydrodynamic Lubrication in Finite Roller Contacts Involving Realistic Geometry and Surface Roughness

A Thermal EHL Model for Finite Line Contact with Non-Newtonian Fluids

A Numerical Study on Contact Condition and Wear of Roller in Cold Rolling

Elastohydrodynamic Lubrication Analysis of Finite Line Contact Problem with Consideration of Two Free End Surfaces

Effect of Thermal Properties of A Coated Elastohydrodynamic Lubrication Line Contact under Various Slide-To-Roll Ratios

Finite element modeling and simulation of mixed elastohydrodynamic lubrication for the finite line contact under tilting loads

Effects of Texture Orientation on the Mixed Thermal Elastohydrodynamic Lubrication and Fatigue Life in Point Contacts

Thermal Elastohydrodynamic Lubrication Analysis For Point Contact Transmission

The Study of Elastohydrodynamic Lubrication for the Dynamic Analysis of Rolling Bearing

Coupling study on dynamics and TEHL behavior of high-speed and heavy-load angular contact ball bearing with spinning

Numerical simulations for the fluid-thermal-structural interaction lubrication in a tilting pad thrust bearing

Numerical Analysis of Tehl Line Contact Problem under Reciprocating Motion

A numerical study of fatigue life in non-Newtonian thermal EHL rolling–sliding contacts with spinning

Thermal mixed elastohydrodynamic lubrication modeling and analysis of the lubricated non-conformal contacts with non-Gaussian surface roughness and coating

A Numerical Solution to the Thermal Elastohydrodynamic Lubrication of Circular Arc Gears

Dynamic Behaviors of the Elastohydrodynamic Lubricated Contact for Rolling Bearings