Abstract:Commercial EUV lithographic systems require multilayers with higher reflectance and better stability than those published to date. This work represents our effort to meet these specifications. Interface-engineered Mo-Si multilayers with 70% reflectance and 0.545-nm bandwidth at 13.5-nm wavelength and 71% reflectance with 0.49-nm bandwidth at 12.7-nm wavelength were developed. These results were achieved with 50 bilayers. These new multilayers consist of alternating Mo and Si layers separated by thin boron carbide layers. Depositing boron carbide on the interfaces leads to reduction in molybdenum silicide formation of the Mo-on-Si interfaces. Bilayer contraction is reduced by 30%, implying that there is less intermixing of Mo and Si to form silicide. As a result, the Mo-on-Si interfaces are sharper in interface-engineered multilayers than in standard Mo-Si multilayers. The optimum boron carbide thicknesses have been determined and appear to be different for the Mo-on-Si and Si-on-Mo interfaces. The best results were obtained with 0.4-nm-thick boron carbide layers for the Mo-on-Si interfaces and 0.25-nm-thick boron carbide layers for the Si-on-Mo interfaces. The increase in reflectance is consistent with multilayers having sharper and smoother interfaces. A significant improvement in oxidation resistance of EUV multilayers has been achieved with ruthenium-terminated Mo-Si multilayers. The best capping-layer design consists of a Ru layer separated from the top Si layer by a boron carbide diffusion barrier. This design achieves high reflectance and the best oxidation resistance during EUV exposure in a water-vapor (oxidizing) environment. Electron-beam exposures of 4.5 h (in an effort to simulate EUV exposure perturbation of the top layers) in the presence of 5×10−7-Torr water-vapor partial pressure show no measurable reflectance loss and no increase in the oxide thickness of Ru-terminated multilayers. © 2002 Society of Photo-Optical Instrumentation Engineers.

Al/Zr Multilayer Mirror and Its Thermal Stability for EUV Application

Thermally induced structural modification in the Al/Zr multilayers

Anti-reflection Coating at 550 Nm Fabricated by Atomic Layer Deposition

The Thermal Stability of Zirconium Aluminate High-K Film on Strained SiGe Layer

Microstructure, infrared optical properties and thermal stability of ZrB2 and double-layer-structure Al2O3/ZrB2 thin films by magnetron sputtering technique

Mo/Si Multilayers with Different Barrier Layers for Applications as Extreme Ultraviolet Mirrors

Al/Zr-based multilayer mirrors with record-breaking reflectivity.

Performance, structure, and stability of SiC/Al multilayer films for extreme ultraviolet applications

Structure and Thermal Stability of (zr0.6al0.4)o1.8 Thin Film on Strained SiGe Layer

The transition from amorphous to crystalline in Al/Zr multilayers

Thermal Stability and Interfacial Properties of Zralxsiyoz Films Prepared by Pulse-Laser Deposition

Microstructure and Electronic Properties of Al/Zr/Linbo3 Multilayers

Improved reflectance and stability of Mo-Si multilayers

Improvement of Thermal Stability of Cu/Cu(Zr)/p-SiOC:H Film Stack Using an Ultra-Thin Zr(Ge) Alloy Film As an Exhaustion Interlayer

High Thermal Stability of Nanostructured Al Mediated by Heterophase Interfaces and Nanotwinning

Design and performance of capping layers for extreme-ultraviolet multilayer mirrors

Investigation of the thermal stability of Mg/Co periodic multilayers for EUV applications

Improvement of the Microstructure and X-ray Performance of Ultrathin Ru/C Multilayer Mirror after High Temperature Treatment

EUV reflectance and scattering of Mo/Si multilayers on differently polished substrates

Ultrathin protective coatings by atomic layer engineering for far ultraviolet aluminum mirrors

Iridium/silicon multilayers for extreme ultraviolet applications in the 20-35 nm wavelength range