Abstract:A hard x-ray nanoprobe beamline is being developed at the Advanced Photon Source (APS). The beamline will house a hard x-ray nanoprobe instrument, one of the centerpieces of the characterization facilities of the Center for Nanoscale Materials (CNM) being constructed at Argonne National Laboratory (ANL). The nanoprobe instrument will operate with photon energies between 3 keV and 30 keV with 30-nm special resolution. Imaging and spectroscopy at this resolution level require staging of x-ray optics and specimens with a mechanical repeatability of better than 10 nm [1]. The instrument will combine a scanning probe mode with a full-field transmission mode. It uses x-ray fluorescence for trace-element mapping and spectroscopy; x-ray diffraction to obtain local structural information such as crystallographic phase, strain texture, and x-ray transmission in phase; and absorption to image internal structures of complex devices. The high-precision positioning mechanisms for the nanoprobe presented here consist of the following major component groups: a granite base with vibration isolators, an optomechanical instrument vacuum chamber, a robotic detector manipulator for microdiffraction, an in situ optical microscope, and a translation-stage system for a transmission imaging detector [2]. Precision positioning mechanisms for a differential scanning stage system with active vibration control in nanometer scale are also presented in this paper. *This work was supported by the U.S. Department of Energy, Office of Basic Energy Sciences, under Contract No. W-31-109-ENG-38. References: [1] J. Maser, G. B. Stephenson, D. Shu, B. Lai, S. Vogt, A. Khounsary, Y. Li, C. Benson, G. Schneider, SRI 2003, AIP Conf. Proc. 705, (2004) 470-473. [2] D. Shu, J. Maser, B. Lai, S. Vogt, M. Holt, C. Preissner, A. Smolyanitskiy, B. Tieman, R. Winarski, and G. B. Stephenson, to be published in the proceedings of X-ray Microscopy 2005, Himeji, Japan, July 2005.

Precision Mechanical Design Of An Ultrahigh-Resolution Inelastic X-Ray Scattering Spectrometer System With Cdfdw Optics At The Aps

Design and Optimization of a Spectrometer for High-Resolution SD-OCT

Precision Mechanical Design of an Uhv-Compatible Artificial Channel-Cut X-Ray Monochromator

Mechanical Design of a Precision Linear Flexural Stage for 3D X-Ray Diffraction Microscope at the Advanced Photon Source

Design of a Diamond-Crystal Monochromator for the LCLS Hard X-Ray Self-Seeding Project

A high-resolution and high-efficiency x-ray spectrometer based on a multi-cone crystal

Design For An X-Ray Nanoprobe Prototype With A Sub-10-Nm Positioning Requirement

Design of an Ultra-fast Electron Diffraction System

Development of a New X-ray Scattering Instrument Based on Two Polycapillary X-ray Optics

Linear Stage System with Subnanometer Resolution and Centimeters Travel Range

A Compact Dispersive Refocusing Rowland Circle X-ray Emission Spectrometer for Laboratory, Synchrotron, and XFEL Applications

Design and Analysis of Conical Diffraction Imaging Spectrometer with High Spectral Resolution and Wide Spectral Dispersion Range

A high precision flat crystal spectrometer compatible for ultra-high vacuum light source

Design of an Ultrahigh-Energy-Resolution and Wide-Energy-Range Soft X-Ray Beamline

High-resolution soft X-ray emission spectrograph at advanced light source

Development of a compact fast CCD camera and resonant soft x-ray scattering endstation for time-resolved pump-probe experiments

Towards performing high-resolution inelastic X-ray scattering measurements at hard X-ray free-electron lasers coupled with energetic laser drivers

A Focusing X-ray Spectrometer Based on Continuously Conical Crystal

High Precision Positioning Mechanisms for a Hard X-ray Nanoprobe Instrument*

X‐ray optics for the cavity‐based X‐ray free‐electron laser

Ultimate bunch length and emittance performance of an MeV ultrafast electron diffraction apparatus with a dc gun and a multicavity superconducting rf linac