Abstract:With the increasing usages of high strength and lightweight materials, how to accurately predict and fully understand the wrinkling instability of thin-walled parts forming under various loading conditions, viz. stress states and normal constraints, is still a challenge for free-defect design and manufacturing. In this study, taking tension-compression stress state w/wo normal constraints (Yoshida test and deep drawing of sheets) and compression stress state w/wo normal constraints (axial compression and rotary draw bending of tubes) as the comparative cases, two kinds of geometric imperfections (GI), viz., random thickness imperfection (RTI) and geometric deflection imperfection (GDI) are introuduced and implemented into dynamic explicit finite element (FE) models to realize more sensitive prediction of the wrinkling instability. And then, a systematic comparative study on the critical wrinkling behavior and final wrinkling morphology under varous loading conditions has been studied. It is found that the wrinkling is more prone to occur under tension-compression stress state, and the wrinkling of the processes without normal constraint are severer than those with normal constraints. Furthermore, the effects of material parameters on the wrinkling are inconsistent in different processes, the reason proved to be the different loading conditions. When the degree of normal constraint increases, the influence of material properties becomes negligible. Combining the geometric and material parameters, the key issues affecting the wrinkling of thin-walled parts from the perspective of loading condition have been expounded, laying the foundation and theoretical guidance for the study of wrinkling behavior under different mechanical states.

Analysis on Critical Conditions of Sidewall Wrinkling for Hydroforming of Thin-Walled Tee-Joint

Analysis of Plastic Wrinkling Behavior in Tube Hydroforming Process

Deformation Patterns in Hydroforming of Thin-Walled Y-Shaped Tube

Study on Wrinkling Behavior in Hydroforming of Large Diameter Thin-Walled Tube Through Local Constraints

Analysis on wrinkling and cracking initiation in hydroforming thin?walled Y?shaped tubes

Research on wrinkling behavior in tube hydroforming

Control and use of wrinkles in tube hydroforming

WRINKLING BEHAVIOR IN HYDROFORMING OF UNSYMMETRICAL TUBULAR PART

Analysis on Corner Wrinkling for Axial Hydro-Forging of Variable-Diameter Tube

Analysis of Wrinkling Behavior of Hydroformed Torsion Beam

Analysis of wrinkling during sheet hydroforming of curved surface shell considering reverse bulging effect

Analysis of Warping Failure in Tube Hydro-Forging

Wrinkling Behavior in Tube Hydroforming Coupled with Internal and External Pressure

A Study on Plastic Wrinkling in Thin-Walled Tube Bending Via an Energy-Based Wrinkling Prediction Model

Loading conditions constrained wrinkling behaviors of thin-walled sheet/tube parts during metal forming

Wrinkling Analysis for Forming Limit of Tube Bending Processes

Explicit Fe Wrinkling Simulation and Method to Catch Critical Bifurcation Point in Tube Bending Process

Investigation into Wrinkling Behavior of Thin-Walled 5a02 Aluminum Alloy Tubes under Internal and External Pressure

Effects of Internal Pressure on Wrinkling in Warm Tube Hydroforming

Effect of Wrinkling Behavior on Formability and Thickness Distribution in Tube Hydroforming

A New Method to Accurately Obtain Wrinkling Limit Diagram in Nc Bending Process of Thin-Walled Tube with Large Diameter under Different Loading Paths