Abstract:Steel/polymer/steel laminates, also known as laminated steels, are composite materials consisting of bonding layers of steel and polymer. The polymer layer acts as a bonding agent between the steel layers, imparting additional properties such as low density, impact resistance, and thermal insulation, while the steel layers provide strength and formability. These laminated steels have found increasing applications in automotive, aerospace, and construction industries to reduce weight and improve fuel efficiency. The bending behavior of this laminates is more complex compared to that of a single layer of metallic sheets. This complexity arises from significant differences in mechanical properties, as well as the thickness ratio between the skin and the core. The flexural properties and behavior of different St14/TPU/St14 laminate sheets that were fabricated using the direct roll bonding (DRB) process were investigated through three-point and hat-shaped bending tests. The direct roll bonding process involves the bonding of steel and semi-melt polymer sheets under the pressure of rollers, ensuring a cohesive and durable composite material. The microscopic analysis of the cross-section of the SPS laminates after the bending processes shows the absence of delamination or slippage between the layers, which indicates the correct selection of materials and the bonding method. The results showed that the springback of three-layer laminates has an inverse relationship with the work-hardening exponent, yield strength, and yield point elongation value, while possessing a direct relationship with normal anisotropy and elastic modulus. Furthermore, the flexural strength and flexural modulus decrease with the increase in the volume fraction of the polymeric core, while the flexural rigidity increases. The findings indicate the DRB technique as a promising method for manufacturing a lightweight metal–polymer laminate with a high formability performance.

Investigation on V-Bending and Springback of Laminated Steel Sheets

Study on bending springback behavior of laminated steel sheet

Experimental and Numerical Analysis of V-bend and Springback of Laminated Steel Sheet

Experimental and Numerical Investigation of Laminated Steel Sheet in V-bending Process Considering Nonlinear Visco-Elasticity of Polymer Layer

Influences of the Evolving Plastic Behavior of Sheet Metal on V-bending and Springback Analysis Considering Different Stress States

Experimental Investigation of Mechanical Properties of the Polymer Layer of Laminated Steel Sheet

Investigation into Springback Characteristics of Two Hss Sheets During Cold V-Bending

Investigation on the Bending Properties and Geometric Defects of Steel/Polymer/Steel Sheets—Three-Point and Hat-Shaped Bending

Experiment and Numerical Simulation of Springback of Laminated Steel Sheet in U-channel Forming Process

Finite Element Analysis for Delamination of Laminated Vibration Damping Steel Sheet

Analytical and Numerical Prediction of Springback of SS/Al-Alloy Cladded Sheet in V-Bending

Experimental Research on Normal Bonding Strength and Hole Expanding Capability of Laminated Vibration Damping Steel Sheet

Unconstrained bending and springback behaviors of aluminum-polymer sandwich sheets

An investigation on springback of L-bending sheet metal forming based on nonlinear elastic unloading

Experiment and Numerical Simulation on Delamination During the Laminated Steel Sheet Forming Processes

Research on the Springback Behavior of 316LN Stainless Steel in Micro-Scale Bending Processes

Influences of Forming Speed and Storing Time on Springback Characteristics of Laminated Sheet Metal Bent Part

Study on the Influencing Factors and Forming Process Selection of Sheet Metal Bending Spring Back Defects

An Analytical Model for Predicting Sheet Springback after V-bending

Comparison of Material Models for Spring Back Prediction in an Automotive Panel Using Finite Element Method

An Analytical Model for Predicting Springback and Side Wall Curl of Sheet after U-bending