Abstract:Cylindrical structures play an important role in industrial fields. The surface crack is a typical defect in the cylindrical structures. Non-destructive surface crack detection of these structures is critical to the safe operation of the equipment. In this study, the signal enhancement of the scanning laser line source (SLLS) method is investigated by a numerical simulation method to identify the location and depth of the surface crack in the aluminum cylinder. A fully coupled explicit finite element model is established to study the signal enhancement of cylindrical surface waves on the aluminum cylinder. The simulation results indicate that the signal enhancement of the SLLS is more sensitive to the surface crack of a cylinder than that of the scanning laser detection (SLD) because of the wider span and higher peak. Due to the phase shift characteristics of surface waves on the cylinder, the maximum peak-to-peak amplitude of signal enhancement in the SLLS method (the SLLS peak) is affected by the detection position and diameter of the cylinder. Therefore, an optimization approach for detection position in SLLS is proposed for the location of surface crack on the cylinder. The locations of the surface crack on the solid cylinders with different diameters are investigated using simulated laser ultrasonic field data. Moreover, we find that the SLLS peak for signal enhancement can effectively respond to the crack depth within a limited scope which is dependent on the directivity pattern of the longitudinal waves.

Complete Noncontact Laser Ultrasonic Imaging for Automated Crack Visualization in A Plate

Reference-free Crack Detection and Localization by Nonlinear Laser Ultrasonic.

Numerical Study for Surface-breaking Crack Detection on A Cylinder Using Laser-generated Ultrasound

A Study of Inner Crack Testing with the Laser Phased Array Method.

Differential Two-Wave Mixing Interferometer for Crack Detection in Metallic Structures Based on Laser-Induced Ultrasound

Quantitative Detection of Small Crack by Nonlinear Laser Ultrasonics

Surface Crack Identification on a Cylinder Using the Signal Enhancement of the Scanning Laser Line Source Method

Detection and Quantification of Damage in Metallic Structures by Laser-Generated Ultrasonics

Fully Noncontact Inspection of Closed Surface Crack with Nonlinear Laser Ultrasonic Testing Method.

Noncontact Laser Ultrasound Detection of Cracks Using Hydrophone

Imaging of Closed Cracks by Water-Coupled Sensor Array Based on Nonlinear Lamb Waves

Wavefield Imaging of Nonlinear Ultrasonic Lamb Waves for Visualizing Fatigue Micro-Cracks.

Laser-generated Surface Waves for Quantitative Detection of Inclined Surface Cracks Based on Finite Element Analysis

Nondestructive evaluation with fully non-contact air-coupled transducer-scanning laser Doppler vibrometer Lamb wave system

Damage imaging using non-contact air-coupled transducer/laser Doppler vibrometer system

Inspection of Cracks with a Laser-ultrasound/EMAT System

Quantitative Estimation of Crack on or Near Surface Using Laser-Ultrasonic Surface Wave: Numerical Simulation

Fully Noncontact Measurement of Inner Cracks in Thick Specimen with Fiber-Phased-array Laser Ultrasonic Technique

Nonlinear Ultrasonic Lamb Wave Phased Array Imaging Based on Hybrid Array and Time-Reversal of Harmonic

Scanning Laser Vibrometry Imaging of Fatigue Cracks Via Nonlinear Ultrasonic Guided Wave Scattering and Mode Conversion

A Bi-grating Laser Acoustic Spectrum Method for Small Surface-Breaking Crack Imaging and Depth Evaluation