Abstract:Structural Health Monitoring, Ahead of Print. Ultrasonic-guided waves full wavefield scanning technology can realize non-destructive testing with non-contact. The damage detection method based on ultrasonic-guided waves' full wavefield data is widely used in thin-walled plate structures. The defect imaging method based on full wavefield data faces the challenge of simultaneously obtaining the defect contour and thickness direction information. Based on the ultrasonic-guided waves full wavefield scanning detection technology, this paper proposes a multi-time Lamb waves space wavenumber imaging method. In this method, the analytic signal of Lamb wavefield at each moment is constructed by Hilbert transform, and the phase unwrapping is carried out by amplitude sorting and multi-clustering method. Then the wavenumber information is obtained by calculating the phase gradient. The wavenumber at different times of each measurement point is arranged in descending order, and the median wavenumber is extracted as the wavenumber at each measurement point. Based on the dispersion relationship of the tested specimen, the quantitative detection of the plate thickness in the detection area is realized. This method is first applied to the simulation model. Then it is applied to the defect imaging and quantitative detection of aluminum plates with rectangular groove defects and carbon fiber reinforced plastics (CFRP) plates with delamination defects. In simulation and experiment, the local wavenumber imaging method, the frequency domain instantaneous wavenumber imaging method, and the multi-time Lamb waves space wavenumber imaging method are used for defect imaging and quantification. The imaging results are compared and analyzed. The result shows that the multi-time Lamb waves space wavenumber imaging method can restore the morphology of groove defects in aluminum plates and delamination defects in CFRP plates, and accurately estimate the depth of groove defects and the location of delamination defects.

Nondestructive evaluation with fully non-contact air-coupled transducer-scanning laser Doppler vibrometer Lamb wave system

Differential Two-Wave Mixing Interferometer for Crack Detection in Metallic Structures Based on Laser-Induced Ultrasound

Nondestructive evaluation of nuclear spent fuel dry cask structures using non-contact ACT-SLDV Lamb wave method

Non-contact Phase Coded Excitation of Ultrasonic Lamb Wave for Blind Hole Inspection

Fast Lamb wave energy shift approach using fully contactless ultrasonic system to characterize concrete structures

Damage Detection in Composite Structures Via Scanning Laser Doppler Vibrometry Using Linear and Nonlinear Ultrasonic Wave Features

ULTRASONIC LAMB WAVES APPLIED IN NONDESTRACTIVE DAMAGE EVALUATION

Multi-time Lamb waves space wavenumber imaging method based on ultrasonic-guided wavefield

Wavenumber-Domain Fast Reconstruction Technique Using Ultrasonic Scanning for Transverse Wave Imaging

Lamb Wave Based Damage Imaging under Nonlinear Chirp Excitation.

Structural health monitoring using scanning laser vibrometry: III. Lamb waves for fatigue crack detection

Numerical Simulation Of Nonlinear Lamb Waves Used In A Thin Plate For Detecting Buried Micro-Cracks

Low-Power Field-Deployable Interdigital Transducer-Based Scanning Laser Doppler Vibrometer for Wall-Thinning Detection in Plates

A method for crack sizing using Laser Doppler Vibrometer measurements of Surface Acoustic Waves

Damage imaging using non-contact air-coupled transducer/laser Doppler vibrometer system

Inspection of Cracks with a Laser-ultrasound/EMAT System

FEM Simulation of Nonlinear Lamb Waves for Detecting a Micro-Crack in a Metallic Plate

Wavefield Imaging of Nonlinear Ultrasonic Lamb Waves for Visualizing Fatigue Micro-Cracks.

Fully Noncontact Inspection of Closed Surface Crack with Nonlinear Laser Ultrasonic Testing Method.

Noncontact Damage Topography Reconstruction by Wavenumber Domain Analysis Based on Air-Coupled Ultrasound and Full-Field Laser Vibrometer

Scanning Laser Vibrometry Imaging of Fatigue Cracks Via Nonlinear Ultrasonic Guided Wave Scattering and Mode Conversion