Abstract:The flow inside a fluid damper where a piston reciprocates sinusoidally inside an outer casing containing high-viscosity silicone oil is simulated using a finite volume method, at various excitation frequencies. The oil is modeled by the Carreau-Yasuda (CY) and Phan-Thien and Tanner (PTT) constitutive equations. Both models account for shear-thinning, but only the PTT model accounts for elasticity. The CY and other generalised Newtonian models have been previously used in theoretical studies of fluid dampers, but the present study is the first to perform full two-dimensional (axisymmetric) simulations employing a viscoelastic constitutive equation. It is found that the CY and PTT predictions are similar when the excitation frequency is low, but at medium and higher frequencies, the CY model fails to describe important phenomena that are predicted by the PTT model and observed in experimental studies found in the literature, such as the hysteresis of the force-displacement and force-velocity loops. Elastic effects are quantified by applying a decomposition of the damper force into elastic and viscous components, inspired from large amplitude oscillatory shear theory. The CY model also overestimates the damper force relative to the PTT model because it underpredicts the flow development length inside the piston-cylinder gap. It is thus concluded that (a) fluid elasticity must be accounted for and (b) theoretical approaches that rely on the assumption of one-dimensional flow in the piston-cylinder gap are of limited accuracy, even if they account for fluid viscoelasticity. The consequences of using lower-viscosity silicone oil are also briefly examined.

Flow Characteristics of Er Fluid in the Model Damper

A Study on Flow Characteristics of Electrorheological Fluid in A Damper Model

Damping Characteristics and Flow Behaviors of an Er Fluid with A Piston Sine Vibration in A Viscous Damper

Investigation of Impulse Response of an Er Fluid Viscous Damper

Modelling and Experiment Study on Fluid Character of Axial Piston Pump

Flow Analysis and Modeling of Field-Controllable, Electro- and Magneto-Rheological Fluid Dampers

Comparing research on two different numerical models of electrostatically actuated valveless micropump

Pressure and Flow Characteristic Modeling of Water Hydraulic Axial Piston Pump Based on Variable Fluid Properties

Study on Theoretical Modeling of Semi-Active Electro-Rheological Fluid Damper

Pressure performance for a thin-walled ring and turbulent-jet orifice modeled elastic squeeze film damper

Study Of Field-Controllable, Electro- And Magneto-Rheological Fluid Dampers In Flow Mode Using Herschel-Bulkley Theory

The Design and Performance of New Gas-Filled ER Damper

Dynamic Modeling Of Semi-Active Er/Mr Fluid Dampers

Theoretical study of the flow in a fluid damper containing high viscosity silicone oil: Effects of shear-thinning and viscoelasticity

Experimental and Numerical Studies on Erosion Damage in Damping Holes on the Valve Plate of an Axial Piston Pump

Analysis and Design of ER Damper for Seismic Protection of Structures

Effect of Suction and Discharge Conditions on the Unsteady Flow Phenomena of Axial-Flow Reactor Coolant Pump

Flow Analysis of Field-Controllable, Electro- and Magneto-Rheological Fluids Using Herschel-Bulkley Model

Analysis of Flow Characteristics of A Cam Rotor Pump

Analysis of the Flow Dynamics Characteristics of an Axial Piston Pump Based on the Computational Fluid Dynamics Method

Compressions of Electrorheological Fluids under Different Initial Gap Distances