Abstract:The flow inside a fluid damper where a piston reciprocates sinusoidally inside an outer casing containing high-viscosity silicone oil is simulated using a finite volume method, at various excitation frequencies. The oil is modeled by the Carreau-Yasuda (CY) and Phan-Thien and Tanner (PTT) constitutive equations. Both models account for shear-thinning, but only the PTT model accounts for elasticity. The CY and other generalised Newtonian models have been previously used in theoretical studies of fluid dampers, but the present study is the first to perform full two-dimensional (axisymmetric) simulations employing a viscoelastic constitutive equation. It is found that the CY and PTT predictions are similar when the excitation frequency is low, but at medium and higher frequencies, the CY model fails to describe important phenomena that are predicted by the PTT model and observed in experimental studies found in the literature, such as the hysteresis of the force-displacement and force-velocity loops. Elastic effects are quantified by applying a decomposition of the damper force into elastic and viscous components, inspired from large amplitude oscillatory shear theory. The CY model also overestimates the damper force relative to the PTT model because it underpredicts the flow development length inside the piston-cylinder gap. It is thus concluded that (a) fluid elasticity must be accounted for and (b) theoretical approaches that rely on the assumption of one-dimensional flow in the piston-cylinder gap are of limited accuracy, even if they account for fluid viscoelasticity. The consequences of using lower-viscosity silicone oil are also briefly examined.

Damping Characteristics and Flow Behaviors of an Er Fluid with A Piston Sine Vibration in A Viscous Damper

A Study on Flow Characteristics of Electrorheological Fluid in A Damper Model

Flow Characteristics of Er Fluid in the Model Damper

Investigation of Impulse Response of an Er Fluid Viscous Damper

Simulation on Hysteresis Characteristic of Squeeze Mode Magneto-Rheological Damper Based on Non-Convex Constitutive Relation

Experimental Investigations on the Nonlinear Dynamics of Magnetorheological Dampers

Analysis and Design of ER Damper for Seismic Protection of Structures

Effect of Temperature and Electric Field on the Damping and Stiffness Characteristics of ER Fluid Short Squeeze Film Dampers

Studies on a Passive Electromagnetic Damper

Theoretical study of the flow in a fluid damper containing high viscosity silicone oil: Effects of shear-thinning and viscoelasticity

A Disc-Type Magneto-Rheologtic Fluid Damper

Dynamic Analysis of Magnetorheological Damper Incorporating Elastic Ring in Coupled Multi-Physical Fields

Experimental and Numerical Studies on Erosion Damage in Damping Holes on the Valve Plate of an Axial Piston Pump

A study on micro strain electrorheological damper model

A Disk-Type Magneto-Rheological Fluid Damper for Rotor System Vibration Control

Experimental investigation on the dynamic behaviour of a disk-type damper based on magneto-rheological grease

Experimental and Theoretical Investigations on an Asynchronized Parallel Double‐Stage Viscous Fluid Damper

Dynamic Performance of A Disk-Type Magnetorheological Fluid Damper under Ac Excitation

Design, Modeling, and Vibration Control of a Damper Based on Magnetorheological Fluid and Elastomer

Mechanical Modeling of Viscous Fluid Damper with Temperature and Pressure Coupling Effects

Research of Electrorheological Fluids Damper Using an Eyring Continuous Constitutive Relationship