Abstract:PurposeThe purpose of this paper is to investigate flow behavior of electrorheological (ER) fluid in a closed piston–cylinder system.Design/methodology/approachA basic study of flow characteristics of ER fluid in a damper model is conducted experimentally and numerically. The electric field is applied between inner wall of the cylinder and outer wall of the piston, and the pressure difference between upper and lower chamber of the cylinder is measured. A numerical prediction of ER fluid flow in the damper model system is performed in order to study the ER fluid flow characteristics. Visualization experiment is also made and used to qualitatively verify the numerical formulation.FindingsThe agreement between the numerical predictions and experimental results is encouraging, and the ER fluid flow patterns under different piston aspect ratios, movement speeds and applied electric field strengths are presented. The results show that the piston aspect ratio has much smaller influence on the ER flow pattern than other influencing factors. Increasing piston movement speed or reducing the electric field applied is helpful to reduce the pressure response time period, which is an important indicator showing sensitiveness of the damper. It is also seen that the pressure difference between the upper and lower chamber of the cylinder increases with the electric field strength and the piston movement speed.Originality/valueFirst time the detailed investigation into the hydrodynamics behavior in such working models of engineering applications for ER fluid.

Investigation of Impulse Response of an Er Fluid Viscous Damper

Damping Characteristics and Flow Behaviors of an Er Fluid with A Piston Sine Vibration in A Viscous Damper

Experimental Investigations on the Nonlinear Dynamics of Magnetorheological Dampers

A Study on Flow Characteristics of Electrorheological Fluid in A Damper Model

Analysis and Design of ER Damper for Seismic Protection of Structures

Study on Vibration Attenuation Performance of A New Structural Electrorheological Fluid Damper

Flow Characteristics of Er Fluid in the Model Damper

Study on Theoretical Modeling of Semi-Active Electro-Rheological Fluid Damper

The Design and Performance of New Gas-Filled ER Damper

Effect of Temperature and Electric Field on the Damping and Stiffness Characteristics of ER Fluid Short Squeeze Film Dampers

Simulation of Dynamic Properties of Er Damper

A study on micro strain electrorheological damper model

Design and parameter identification of electro-rheological dampers

Dynamic modelling of an ER vibration damper for vehicle suspension applications

DESIGN AND PERFORMANCE RESEARCH OF A FRICTION FREE ELECTRORHEOLOGICAL FLUID DAMPER

Application of hyperbolic differential quadrature method for vibration responses of the electrorheological disk

Study of characteristics of electro-rheological fluid and its applied devices

A Disc-Type Magneto-Rheologtic Fluid Damper

Study Of Field-Controllable, Electro- And Magneto-Rheological Fluid Dampers In Flow Mode Using Herschel-Bulkley Theory

Investigation into the Impact and Buffering Characteristics of A Non-Newtonian Fluid Damper: Experiment and Simulation

Dynamic Modeling Of Semi-Active Er/Mr Fluid Dampers