Abstract:Carbon fiber paper (CFP) is one of the most widely used gas diffusion layer materials for proton exchange membrane fuel cells (PEMFC) due to its excellent properties such as high conductivity, high strength, high air permeability and corrosion resistance. In this study, CFP was prepared using the phenolic resin (PF) in-pulp addition method. The effect of PF content on the properties of hot-pressed paper (HPP) and CFP was investigated. The results showed that when the dosage of polyethylene oxide (PEO) was 1.5 wt%, the flocculation effect of PEO on PF was basically complete, and the water filterability and retention of carbon fiber pulp were relatively optimal. After HPP was carbonized into CFP, the hydrophobicity, average pore size, porosity, and air permeability increased, while the resistivity and tensile strength decreased. With the increase of PF content, the tensile strength of CFP gradually increased, while the average pore size, porosity, air permeability and resistivity decreased. When the PF content was 250 wt%, the average pore size of CFP was 36.5 μm, the water contact angle was 127°, the porosity was 69.7%, the air permeability was 7.81 × 10 3 mL mm/(cm 2 ·h·mmHg), the resistivity was 21.1 mΩ cm, and the tensile strength was 15.7 MPa. In addition, the CFP prepared using PF in-pulp addition method had a relativity uniform pore size distribution and high air permeability. Therefore, this work shows that the CFP prepared using this technique exhibits excellent comprehensive performance, and enables the manufacturing of CFP to be more efficient, low-cost, and environmentally friendly.

Preparation and Characterization of Carbon Fiber Paper for Application of Proton Exchange Membrane Fuel Cell

Interfacial Modiﬁcation and Dispersion of Short Carbon Fiber and the Properties of Composite Papers As Gas Diffusion Layer for Proton Exchange Membrane Fuel Cell (PEMFC)

Study on micro-porous layer by coating on carbon fiber paper as gas diffusion layer

Preparation of Carbon Paper for Proton Exchange Membrane Fuel Cell

Preparation of Gas Diffusion Carbon Paper and Its Uniformity Analysis

Study on modification of carbon fiber and performance of carbon paper as gas diffusion layer

Effects of PF Resin Char Content on Structure and Properties of Carbon Paper

Carbon Fiber Paper Fabricated by CVD for Application of Proton Exchange Membrane Fuel Cell

Carbon paper fabricated by molding and CVD process for PEMFC application

Optimal Fabrication of Carbon Paper by Different Lengths of Chopped Carbon Fibers and Its Enhanced Performance in Proton Exchange Membrane Fuel Cell

Influence of Graphite Powder on the Properties of Carbon Paper for Proton-Exchange Membrane Fuel Cells

Structure and properties of carbon fiber paper with gradient porous structure

Efficient preparation and characterization of carbon fiber paper using phenolic resin in-pulp addition method

Synergistically improve the strength and porosity of carbon paper by using a novel phenol formaldehyde resin modified with cellulose nanofiber for proton exchange membrane fuel cells

Investigation of Pyrocarbon Based Carbon Paper for Proton Exchange Membrane Fuel Cells

Graph Theory Model and Mechanism Analysis of Carbon Fiber Paper Conductivity in Fuel Cell Based on Physical Structure

Highly flat and highly homogeneous carbon paper with ultra-thin thickness for high-performance proton exchange membrane fuel cell (PEMFC)

Graphene oxide modified carbon fiber paper used in proton exchange membrane fuel cells

Carboxyl-Terminated Butadiene-Acrylonitrile-Modified Carbon Paper for Use of Gas Diffusion Layer in Pem Fuel Cells

Study on the Effect of Carbon Fiber Surface Characteristics on the Performance of Carbon Paper Used in Fuel Cell

Influence of Long Carbon Fiber Content on Properties of Carbon Paper for PEMFC