Abstract:Micro-projector has found wide application in the field of mobile phone, pico-projector et al. However, because of the depth of the field of the projection lens, precise focus mechanical design is needed for the optical engineer to get fine and clear image.Wavefront coding technique is a novel technique which is introduced by Dowski and Cathey in 1995. By adding an aspheric phase mask at the pupil of the optical system, wavefront coding technique can make the imaging performance of the optical system insensitive to the defocus, and can also make the system insensitive to the defocus related aberrations, such as spherical aberration, chromatic aberration, field curvature, astigmatism and so on.In this paper, a projection lens with long depth of field for the CF-LCOS projector is developed to satisfy the new requirement. We first design the projection lens with the traditional optical design software to let it project the image to the average projection distance. For example, if the lens is designed with in the range of 0.65-2.0m, then about 1.0m is selected as the preliminary projection distance. After the lens (with a 3mm plane plate at the stop surface) is optimized with the CODE V in this distance, the plane plate is replaced with cubic phase plate. Then the lens is optimized again (the phase plate parameter varied for optimization) to get the final lens. In the new optimization, the resolution should be 3 times of the real resolution according to the LCOS resolution. This new optimized lens has the same MTF or PSF for different fields between 0.65 and 2m projection distances, this ensures the high resolution with no focus operation.Because of the MTF satisfies the LCOS requirement between the distance of 0.65 to 2m, no resolution is damaged and also no focus operation is need in this effective projection distance, thus no mechanical focus system is needed.

35.2: Design of Hybrid Refractive/Reflective Projection Optics for Family Theatre

Optical Design in Packaging and Illuminating System for High Power Light-Emitting Diodes for Projection System

The Method of Reflective Fly Eye Lens Design for LED Illuminating Projection System

P-154: Reflective Fly Eye Condenser Design for LED Illuminating Projection System

A Compact Lcd Projector with High Optical Performance

Design of reflective projection lens with Zernike polynomials surfaces

Improved Projection Optics for Reflective Silicon CMOS Light Valves

Design of Off-Axis Reflective Projection Lens Using Spherical Fresnel Surface

Design of Ultra-Thin Projection System with Curved Screen Based on Zernike Free-Form Surfaces

Flat-Concave Dual-Mirror Configuration Design for Upright Projection-Type Ultrashort Throw Ratio Projectors

Compact Design of Projection Lens for 3D Profilometry Based on Interferometric Fringes

Field curvature correction method for ultrashort throw ratio projection optics design using an odd polynomial mirror surface

Hybrid Meta-Optics Enabled Compact Augmented Reality Display with Computational Image Reinforcement

Design of an optical system in an ultra-short throw projector using the aspheric surfaces

Design and Fabrication of Infrared Hybrid Refractive/diffractive Optical System for 3-5Μm Band

Super Wide Angle Projection Lens For Laser Display

P‐119: A Novel Reflector for Rear‐Projection Systems

Method to Design Two Aspheric Surfaces for a Wide Field of View Imaging System with Low Distortion

Method for Improving the Performance of Wide Screen Projection Display Illumination System

Illumination System with Compound Parabolic Retro-Reflector for Single LCOS Panel Projection Display

Defocus Insensitive Projection Lens For Cf-Lcos Pico-Projector