Abstract:The basic imaging formula of the fly-eyes illumination system has been deduced from the optical imaging point, according to the characteristics of LED emission and the characteristics of the Color -Filter Liquid Crystal on the Silicon(CF-LCoS). The initial lighting system of the CF-LCoS can be given with the basic formula of the fly-eyes imaging system by considering the size of the target area of the CF-LCoS, the incident angle of the light beam on the CF-LCoS, the requirement of the spot size and the divergence angle after LED's light shaping. Then with the multi-conjugate imaging relationship of the fly-eyes illumination system, the fly-eyes imaging and the relay lens imaging can be optimized, which can be linked up to form a fly-eyes and the illumination system of the CF-LCoS under large illumination angle through the matching principle of the aperture and the intermediate image finally. The problem of lighting system efficiency, uniformity and large incident angle can be solved by using less number of eyes under the condition of ensuring the illumination requirements of the CF-LCoS. This method is simpler and more accurate than the traditional calculation method. The simulation results of the non-imaging software show that the illumination is with good uniformity and high efficiency. Finally, the experimental prototype is designed and and fabricated to verify the correctness and effectiveness of the proposed method.

P-154: Reflective Fly Eye Condenser Design for LED Illuminating Projection System

The Method of Reflective Fly Eye Lens Design for LED Illuminating Projection System

Optical Design in Packaging and Illuminating System for High Power Light-Emitting Diodes for Projection System

Fly Eye Lens Array Used in Liquid Crystal Projection Display with High Light Efficiency

A Compact Lcd Projector with High Optical Performance

Improved Projection Optics for Reflective Silicon CMOS Light Valves

Freeform Lens Design for LED Illmination

Method for Improving the Performance of Wide Screen Projection Display Illumination System

Design of Laser Projection Display Illumination System Based on Freeform Surface Array

Illuminator with Special CPC Retro-Reflector for Single LCOS Panel Micro-Display

Design of an Elliptic Spot Illumination System in LED-based Color Filter-Liquid-crystal-on-silicon Pico Projectors for Mobile Embedded Projection.

Fly-eyes Lens System Design Based on the Multiplex Conjugate Imaging Principle for the CF-LCoS Projection with LED Illumination

Optical design for uniform color mixing illumination system

Ray Targeting for Optimizing Smooth Freeform Surfaces for Led Non-Rotational Illumination

Design of Off-Axis Arranged Light-Emitting Diodes and Dual Dichroic Mirrors Based Color Mixing System for Micro-Projection Display

Design of the Micro-Projector Light Source

53.2: An Optimization Design Method of LED Freeform Lens for Uniform Circular Illumination

Illumination System with Compound Parabolic Retro-Reflector for Single LCOS Panel Projection Display

Illuminating System for Single Color Filter LCoS Panel Micro-Projector

Design of LED-based Reflector-Array Module for Specific Illuminance Distribution

Optimization design of irradiance array for LED uniform rectangular illumination.