Abstract:A series of Polyaniline (PANI) nanofibers were prepared as conductive filler. The polyvinyl alcohol (PVA)/agarose (AG) double network hydrogel was used as flexible substrate. PANI/PVA/AG conductive hydrogel was prepared by in-situ polymerization of polyaniline nanofibers in PVA/AG double network hydrogel. The electrochemical performance of the PANI/PVA/AG hydrogel electrode material was linked to the fiber morphology of polyaniline. The doping of polyaniline with 0.020 mol/L citric acid demonstrated superior fiber morphology compared to doping with other citric acid concentrations, achieving fiber ratios of 80%. The specific capacitance of the PANI/PVA/AG hydrogel electrode materials doped with 0.020 mol/L citric acid was 285 mF/cm2, while the conductivities was 7.1 S/m. The doping of polyaniline with 0.5 mol/L hydrochloric acid demonstrated superior fiber morphology compared to doping with other hydrochloric acid concentrations, achieving fiber ratios of 65%. The specific capacitance of the PANI/PVA/AG hydrogel electrode materials doped with 0.5 mol/L hydrochloric acid was 249 mF/cm2, while the conductivities was 7.6 S/m. After 500 cycles of charge-discharge, the specific capacitance retention of the material was 73%. Photosensitivity tests indicated that the hydrogel exhibited high sensitivity to shorter wavelengths of blue light (460 nm) and ultraviolet light (380 nm). The hydrogel sensor had a high sensitivity to the strain in the range of 0% to 120%. The Gauge factors (GF) of the hydrogel strain sensor were 1.280, 2.141, 1.907, and 1.261 for strain ranges of 0% to 30%, 30% to 60%, 60% to 90%, and 90% to 120%, respectively. The cyclic strain tensile tests indicated that the relative resistance change rate (ΔR/R0) of the hydrogel sensor demonstrated a certain degree of repeatability and stability within the range of 0% to 100%. Thus, the hydrogel sensor has reliability and stability in the signal transmission process of detecting human movement as a flexible strain sensor. These results suggest that the PANI/PVA/AG conductive hydrogel is a multifunctional composite with good electrochemical storage performance, photosensitivity, and strain sensitivity, which can be applied to applications such as supercapacitors, flexible sensors and electronic wearable devices.

One-step Synthesis of Iodine Doped Polyaniline-Reduced Graphene Oxide Composite Hydrogel with High Capacitive Properties

Hydrothermal Synthesis of Polyaniline Nanospheres Coupled with Graphene Oxide for Enhanced Specific Capacitance Performances

Tin Disulphide/nitrogen-Doped Reduced Graphene Oxide/polyaniline Ternary Nanocomposites with Ultra-High Capacitance Properties for High Rate Performance Supercapacitor.

One-step construction of graphene–polypyrrole hydrogels and their superior electrochemical performance

One-pot Hydrothermal Synthesis of Polyaniline Nanofibers/reduced Graphene Oxide Nanocomposites and Their Supercapacitive Properties

Synthesis and Properties of Poly(2,2'-Dithiodianiline-co-aniline)-graphene Oxide Nanocomposite As Electrode Material for Supercapacitors

Hierarchical Nanostructured Conducting Polymer Hydrogel with High Electrochemical Activity

In situ one-pot synthesis of graphene–polyaniline nanofiber composite for high-performance electrochemical capacitors

High‐Rate and High‐Volumetric Capacitance of Compact Graphene–Polyaniline Hydrogel Electrodes

One-Step Fabrication of Ice-Templated Pure Polypyrrole Nanoparticle Hydrogels for High-Rate Supercapacitors

Preparation of morphology-controllable polyaniline and polyaniline/ graphene hydrogels for high performance binder-free supercapacitor electrodes

Tuning the Surface Chemical State of Graphene Oxide Sheets for the Self‐Assembly of Graphene Hydrogel for Capacitive Energy Storage

Sucrose in situ physically cross-linked of polyaniline and polyvinyl alcohol to prepare three-dimensional nanocomposite hydrogel with flexibility and high capacitance

Iodine-steam Doped Graphene Films for High-Performance Electrochemical Capacitive Energy Storage

Preparation of polyaniline/graphene oxide nanocomposite for the application of supercapacitor

Iodine Adsorption in Nanoporous Carbon to Fabricate Assimilated Battery Electrodes for Durable Hybrid Supercapacitors

Green Chemistry Approach for One‐Step Synthesis of Iodinated Graphene Material for Supercapacitor Applications

Capacitance Performances of Supramolecular Hydrogels Based on Conducting Polymers

Multifunctional polyaniline nanofibers conductive hydrogel for supercapacitors and flexible sensors

Facile Fabrication of Reduced Graphene Oxide/Polypyrrole Composite Hydrogels with Excellent Electrochemical Performance and Compression Capacity

Revisiting the Capacitance of Polyaniline by Using Graphene Hydrogel Films As A Substrate: the Importance of Nano-Architecturing