Abstract:In the present work, a green high-yielding method for the preparation of graphene is introduced via ultrasonic-assisted liquid phase exfoliation (LPE) of graphite in a green solvent medium, since the common preparation method of graphene via graphite oxide is hazardous. A high concentration of 3.2 mg/ml graphene is achieved here in a comparatively short duration of 3 h ultrasonication. By using a mixed solvents strategy (acetophenone and isopropyl alcohol, 1:19 V/V), surface energy requirements needed for the exfoliation of graphite are satisfied here with acetophenone, where isopropyl alcohol further facilitated the exfoliation via non-conventional CH-π and OH-π interactions. Turbostratic graphene in high-yield (16 %) in a simple means of ultrasonic assisted LPE is the added attraction of the present procedure. The less-defective structure of graphene, its few-layered turbostratic nature, and edge functionalization of the sheets are evident from the material characterization via Raman spectroscopy, XRD, TEM-SAED, and XPS analyses. Here, we report a combination of the attractive conducting polymer polyaniline (PANI) with the as-prepared graphene for supercapacitor applications, where the PANI/graphene nanocomposites with different aniline concentrations (PANI1.125/G, PANI4.5/G, and PANI9/G) have been prepared via in-situ polymerization of aniline in the graphene dispersion. The structure and morphology of the nanocomposites are investigated using different characterization techniques which revealed that the molecular structure of the PANI is retained in the nanocomposites even with a strong interaction with graphene. FESEM and TEM images revealed the good coverage of graphene sheets with PANI that limit the volume change of PANI during the repeated charge-discharge processes. Electrochemical studies showed that PANI4.5/G has the highest specific capacitance of 126.16 mF/cm2 at a current density of 1 mA/cm2, resulting from the perfect combination of the pseudocapacitance behavior of the PANI along with the electrical double layer capacitance of graphene. A symmetric supercapacitor device is also fabricated with PANI4.5/G, which showed the highest areal capacitance of 116.38 mF/cm2 similar to that with three-electrode studies and also good cycling stability with 87 % capacitance retention in the specific capacitance after 6000 cycles. It also exhibited an energy density of 16 µWh/cm2 (0.29 Wh/kg) and a power density of 3.99 mW/cm2 (72.72 W/kg).

Green Chemistry Approach for One‐Step Synthesis of Iodinated Graphene Material for Supercapacitor Applications

Synthesis of the Graphene/Nickel Oxide Composite and Its Electrochemical Performance for Supercapacitors

Ionic Liquid Modified Graphene for Supercapacitors with High Rate Capability

One-step Low-Temperature Liquid Phase Method for Synthesis of Three-Dimensional Porous Graphene and Applications in Supercapacitor

An environmentally sustainable ultrasonic-assisted exfoliation approach to graphene and its nanocompositing with polyaniline for supercapacitor applications

A Novel Approach Of Binary Doping Sulfur And Nitrogen Into Graphene Layers For Enhancing Electrochemical Performances Of Supercapacitors

One-pot synthesis of phosphorous, iodine atoms co-functionalized graphene for high-performance supercapacitor and flame-retardant applications

One-step Synthesis of Iodine Doped Polyaniline-Reduced Graphene Oxide Composite Hydrogel with High Capacitive Properties

Synthesis and Properties of Poly(2,2'-Dithiodianiline-co-aniline)-graphene Oxide Nanocomposite As Electrode Material for Supercapacitors

One-Step Solvothermal Synthesis by Ethylene Glycol to Produce N-rGO for Supercapacitor Applications

One-step synthesized N-doped graphene-based electrode materials for supercapacitor applications

Iodine Adsorption in Nanoporous Carbon to Fabricate Assimilated Battery Electrodes for Durable Hybrid Supercapacitors

Influence of Aqueous Electrolytes on the Electrochemical Behaviors of Nitrogen-Doped Graphene Hydrogel Electrodes for Supercapacitors

Simultaneous Electrochemical Exfoliation and Chemical Functionalization of Graphene for Supercapacitor Electrodes

Facile and Tunable Synthesis of Nitrogen-Doped Graphene with Different Microstructures for High-Performance Supercapacitors

One-Step Scalable Fabrication of Nitrogen and Chlorine Co-doped Graphene by Electrochemical Exfoliation for High-Performance Supercapacitors

Facile Synthesis and Supercapacitor Properties of Graphene Nanosheets

Synthesis of Reduced Graphene Nanosheet/urchin-Like Manganese Dioxide Composite and High Performance As Supercapacitor Electrode

Real Time Tracking of Nanoconfined Water-Assisted Ion Transfer in Functionalized Graphene Derivatives Supercapacitor Electrodes

Surface engineering of graphene for high performance supercapacitors

Controlled Synthesis of the State-of-the-art Quasi One-Dimensional Graphene Nanostructure for High Performance Supercapacitor