Abstract:Field sensor networks have important applications in environmental monitoring, wildlife preservation, in disaster monitoring and in border security. The reduced cost of electronics, sensors and actuators make it possible to deploy hundreds if not thousands of these sensor modules. However, power technology has not kept pace. Current power supply technologies such as batteries limit many applications due to their low specific energy. Photovoltaics typically requires large bulky panels and is dependent on varying solar insolation and therefore requires backup power sources. Polymer Electrolyte Membrane (PEM) fuel cells are a promising alternative, because they are clean, quiet and operate at high efficiencies. However, challenges remain in achieving long lives due to factors such as degradation and hydrogen storage. In this work, we devise a framework for designing fuel cells power supplies for field sensor networks. This design framework utilize lithium hydride hydrogen storage technology that offers high energy density of up to 5000 Wh/kg. Using this design framework, we identify operating conditions to maximize the life of the power supply, meet the required power output and minimize fuel consumption. We devise a series of controllers to achieve this capability and demonstrate it using a bench-top experiment that operated for 5000 h. The laboratory experiments point towards a pathway to demonstrate these fuel cell power supplies in the field. Our studies show that the proposed PEM fuel cell hybrid system fueled using lithium hydride offers at least a 3 fold reduction in mass compared to state-of-the-art batteries and 3-5 fold reduction in mass compared to current fuel cell technologies.

A Long-Term Stable Power Supply Μdmfc Stack for Wireless Sensor Node Applications

A Portable Direct Methanol Fuel Cell Power Station for Long-Term Internet of Things Applications

A micro-direct methanol fuel cell stack with optimized design and microfabrication

A fully capillary-driven μDMFC twin-stack operating in all orientations

Development of Integrated Packaged Single Fuel Cell Short Stack Based on Titanium Metal Plates for Mobile Power Generation

An Air-Breathing Micro Direct Methanol Fuel Cell Stack Employing a Single Shared Anode Using Silicon Microfabrication Technologies

A Fully Capillary-Driven Mu Dmfc Twin-Stack Operating In All Orientations

Design and fabrication of a silicon-based micro direct methanol fuel cell stack

Power characteristics and fluid transfer in 40 W direct methanol fuel cell stack

On-chip Hybrid Power Supply System for Wireless Sensor Nodes

A Terrestrial Microbial Fuel Cell for Powering a Single-Hop Wireless Sensor Network

The design of long-life, high-efficiency PEM fuel cell power supplies for low power sensor networks

A Silicon-Based Micro Direct Methanol Fuel Cell Stack with Compact Structure and PDMS Packaging

A Methanol Fuel Processing System with Methanol Steam Reforming and CO Selective Methanation Modules for PEMFC Application

An Air-Breathing Micro Direct Methanol Fuel Cell with 3D KOH-Etched Cathode Structure

A Water Collecting and Recycling Structure for Silicon-Based Micro Direct Methanol Fuel Cells

Design, Fabrication and Testing of a Silicon-Based Air-Breathing Micro Direct Methanol Fuel Cell

Passive cathodic water/air management device for micro-direct methanol fuel cells

A Μdmfc Stack with Hybrid Mass Transportation Scheme

Design of Multi-Stack Control System for DMFC Based on AT89S52

An Energy Management Strategy Considering the Economy and Lifetime of Multi-Stack Fuel Cell Hybrid System