Abstract:A strain-insensitive temperature sensor based on multimode interference using standard multimode fibers (MMFs) is proposed according to the comprehensive study of the characteristics of the MMFs. The temperature and strain dependences on the core diameter, numerical aperture (NA), and the length of the MMF section in the single-mode--multimode--single-mode (SMS) fiber structure are investigated experimentally. The results indicate that the larger core diameter of the MMF leads to higher temperature sensitivity but lower strain sensitivity (absolute values); the higher NA does not influence the temperature sensitivity but results in higher absolute value of strain sensitivity; the longer MMF section brings lower temperature sensitivity but does not have an impact on strain sensitivity. These findings also contribute to the theoretical analysis of the length dependence in the SMS fiber sensors. Besides, the results of the characterization study show that the strain sensitivity is relatively low, which brings a possibility to develop a strain-insensitive temperature sensor. The proposed sensor is used for temperature sensing while the strain is constantly applied from 0 to 1100 $\mu\epsilon$ with steps of 100 $\mu\epsilon$. The measured results are consistent with the comprehensive study. The mean temperature sensitivity is 6.14 pm/$^{\circ}$C with a standard deviation of 0.39 pm/$^{\circ}$C, which proves that the proposed temperature sensor exhibits good stability and is insensitive to strain. We expect that these results will provide a profound guideline to fiber sensors based on multimode interference.

Single‐mode–multimode–single‐mode Fiber Structures for Simultaneous Measurement of Strain and Temperature

Strain Sensor Based on Gourd-Shaped Single-Mode-multimode-single-mode Hybrid Optical Fibre Structure.

Simultaneous Measurement for Strain and Temperature Using Fiber Bragg Gratings and Multimode Fibers

Optical Fiber Sensor with Double Tubes for Accurate Strain and Temperature Measurement under High Temperature Up to 1000 °C

Simultaneous Measurement for Strain and Temperature Based on the Twisted-Tapering Fiber Structure

Simultaneous Measurement of Strain and Temperature Based on Fiber Sensor with Vernier Effect

Simultaneous Measurement of Strain and Temperature by Two Peanut Tapers with Embedded Fiber Bragg Grating.

Ultrasensitive Parallel Double-Fpis Sensor Based on Vernier Effect and Type II Fiber Bragg Grating for Simultaneous Measurement of High Temperature and Strain

Simultaneous Measurement of Axial Strain and Temperature Based on Twisted Fiber Structure

Simultaneous Measurement of Axial Strain and Temperature Based on a Z-Shape Fiber Structure

Fiber-optic multimode interference sensing: comprehensive characterization and its potential for strain-insensitive temperature sensing

Temperature and strain simultaneous sensing measurement based on an all-fiber Mach-Zehnder interferometer and fiber Bragg grating

Simultaneous Measurement of Strain and Temperature Using A Hybrid Local and Distributed Optical Fiber Sensing System

Simultaneous Strain and Temperature Fiber Grating Laser Sensor Based on Radio-Frequency Measurement

Multi-parameters SMS optical fiber sensing by employing SCBSS signal processing technique

Simultaneous strain and temperature measurement by cascading few-mode fiber and single-mode fiber long-period fiber gratings

Polarimetric Multilongitudinal Mode Fiber Laser for Simultaneous Measurement of Strain and Temperature

Simultaneous Strain and Temperature Measurement with Fiber Bragg Grating and Multimode Fibers Using an Intensity-Based Interrogation Method

A Spiral-Polished Fiber Sensor for Strain and Temperature Measurement

Simultaneous Measurement of Strain (to 2000 /spl Mu//spl Epsiv/) and Temperature (to 600/spl Deg/c) Using a Combined Sb-Er-Ge-codoped Fiber-Fluorescence and Grating-Based Technique

Advanced Fiber Optic Sensing for Cryogenic Simultaneous Temperature and Strain Measurement