Abstract:This research focuses on 3D printable thermoplastic polyurethane filaments embedded with multi‐walled carbon nanotubes for enhanced strain sensing in large deformations. It explores the electromechanical properties of the filaments, identifying a conductive threshold in the composite material. The study also examines the application of these filaments in flexible structures, particularly for soft robotics and wearable electronics. This study investigates the development of thermoplastic polyurethane (TPU) filaments incorporating multi‐walled carbon nanotubes (MWCNT) to enhance strain‐sensing capabilities. Various MWCNT reinforcement ratios are used to produce customized feedstock for fused filament fabrication (FFF) 3D printing. Mechanical properties and the piezoresistive response of samples printed with these multifunctional filaments are concurrently evaluated. Surface morphology and microstructural observations reveal that higher MWCNT weight percentages increase filament surface roughness and rigidity. The microstructural modifications directly influence the tensile strength and strain energy of the printed samples. The study identifies an apparent percolation threshold within the 10–12 wt.% MWCNT range, indicating the formation of a conductive network. At this threshold, higher gauge factors are achieved at lower strains. A newly introduced Electro‐Mechanical Sensitivity Ratio (ESR) parameter enables the classification of composite behaviors into two distinct zones, offering the ability to tailor self‐sensing structures with on‐demand properties. Finally, flexible structures with proven application in soft robotics and shape morphing are fabricated and tested at different loading conditions to demonstrate the potential applicability of the custom filaments produced. The results highlight a pronounced piezoresistive response and superior load‐bearing performance in the examined structures.

Production of Flexible and Electrically Conductive Polyethylene–Carbon Nanotube Shish-Kebab Structures and Their Assembly into Thin Films

Structure and Morphology of Poly(lactic Acid) Stereocomplex Nanofiber Shish Kebabs.

PREPARATION OF PE/CNTs SHISH-KEBAB STRUCTURES USING SOLUTION CRYSTALLIZATION

Formation of Polymer/carbon Nanotubes Nano-Hybrid Shish–kebab Via Non-Isothermal Crystallization

Modification of carbon nanotubes using poly(vinylidene fluoride) with assistance of supercritical carbon dioxide: the impact of solvent

High-speed Melt Stretching Produces Polyethylene Nanocomposite Film with Ultrahigh Mechanical Strength

Fabrication of Shish-Kebab-structured Carbon Nanotube/poly（ε-Caprolactone） Composite Nanofibers for Potential Tissue Engineering Applications

High-Yield Synthesis of Nanohybrid Shish-Kebab Polyethylene-Carbon Nanotube Structure

Chain conformation, crystallization behavior, electrical and mechanical properties of electrospun polymer-carbon nanotube hybrid nanofibers with different orientations

Study on the Structure and Performance of Carbon Nanotube/High-Density Polyethylene Composite Film

Tuning Carbon Nanotube Assembly for Flexible, Strong and Conductive Films.

Strain‐sensing behavior of flexible polypropylene/poly(ethylene‐co‐octene)/multiwalled carbon nanotube nanocomposites under cyclic tensile deformation

Fabrication and Characterization of Electrically Conductive 3D Printable TPU/MWCNT Filaments for Strain Sensing in Large Deformation Conditions

Polymer nanocomposite thin films prepared using single- and multi-walled carbon nanotubes for flexible electronics

Surface‐Induced Polymer Crystallization in High Volume Fraction Aligned Carbon Nanotube–Polymer Composites

Fabrication of Dielectrically Sensitive Carbon Nanotube/Polyethylene Nanohybrid Shish-Kebab Structure for Potential Tissue Engineering Applications

Structural evolution of ultra-high molecular weight polyethylene gel film stretching at different temperatures with reservation of shish crystals

Fabrication of Multiwalled Carbon Nanotube/Polypropylene Conductive Fibrous Membranes by Melt Electrospinning

Preparation and tensile conductivity of carbon nanotube/polyurethane nanofiber conductive films based on the centrifugal spinning method

Molecular Dynamics Simulation on the Crystallization Behavior of Cyclic Polyethylene Affected by Functionalized Carbon Nanotubes

Chain rigidity controlled aggregation ability and solid-state microstructures for efficient stretchable conjugated polymer films