Abstract:The application of the positive temperature coefficient (PTC) materials in electrothermal anti-icing offers not only uniform heating of the anti-icing area, but also adaptive temperature control of the material. This study focuses on the preparation of a low Curie point PTC material with a Curie temperature point of 1 degrees C, using the insitu polymerization method. The PTC behaviors of the material were extensively investigated by adjusting the component ratios and the microstructures of the materials were analyzed in correlation with scanning electron microscopy (SEM) images. Subsequently, adaptive temperature control and stability experiments were conducted to evaluate the material's performance. Eventually, the material was adopted to electrothermal anti-icing experiment for wind turbine blades. The results demonstrate that when the mass fraction of acetylene black is 9 wt%, the mass ratio of n-tetradecane/hydroxyl-terminated polydimethylsiloxane (HTPDMS) is 1:1, and the mass ratio of polydimethylsiloxane (PDMS)/HTPDMS is 1:2, the low-temperature resistivity of the low Curie point PTC material reaches an impressive value of only 5.37 omega cm, the PTC intensity can reach 2.99, and the thermal conductivity can reach 0.778 W/(m & sdot;K). Furthermore, the material exhibits robust adaptive temperature control capability, effectively maintaining the temperature below 3 degrees C under different operating voltages and ambient temperatures. Even after 100 cyclic experiments, the material demonstrates superior PTC behavior, excellent temperature control ability, and exceptional stability. Additionally, under different operating voltages, ambient temperatures and wind speeds, the low Curie point PTC material exhibits excellent adaptive adjustment capability and maintains uniform heating of the anti-icing surface. These findings provide valuable insights for in-depth exploration of the low Curie point PTC electrothermal anti-icing materials.

Theoretical and Experimental Studies on Thermal Control by Using a Novel PTC Material with Room Temperature Curie Point

Study on PID Temperature Control Performance of a Novel PTC Material with Room Temperature Curie Point

Studies on preparation and adaptive thermal control performance of novel PTC (positive temperature coefficient) materials with controllable Curie temperatures

Fabrication and performance evaluation of the flexible positive temperature coefficient material for self‐regulating thermal control

Study on Dynamic Thermal Control Performance of Positive Temperature Coefficient (PTC) Material Based on a Novel Heat Transfer Model Considering Internal Heat Transfer

Experimental Study of Accurate Temperature Control Using PTC Resistance

Study On Thermal Control Behavior By Using Batio3-Based Ptc Materials With Room Temperature Curie Point

High-precision Adaptive Temperature Control Performance of Thin Positive Temperature Coefficient Materials with Ultra-High Resistance-Temperature Coefficient

Study on the low Curie point positive temperature coefficient (PTC) material based on the conductive model

A Dimensionless Study on Thermal Control of Positive Temperature Coefficient (PTC) Materials

Positive temperature coefficient material based on silicone rubber/ paraffin/ graphite/ carbon nanotubes for wearable thermal management devices

Development and Application of the Low Curie Point Positive Temperature Coefficient (PTC) Electrothermal Anti-Icing Material

A New Thermal Controlling Material with Positive Temperature Coefficient for Body Warming: Preparation and Characterization

The Integrated Performance of Adaptive Temperature Control and Temperature Measurement of PTC Materials with High Thermal Cycle Repeatability

A Novel Flexible Room Temperature Positive Temperature Coefficient Material for Thermal Management

A New Kind of Shape-Stabilized PCMs with Positive Temperature Coefficient (PTC) Effect

Polymer Positive Temperature Coefficient Composites with Room-Temperature Curie Point and Superior Flexibility for Self-Regulating Heating Devices

Research progress on conduction mechanism and factors influencing the performance of polymeric PTC composites

Investigation of the Positive Temperature Coefficient Resistivity of Nb-Doped Ba0.55Sr0.45TiO3 Ceramics

Research and Application of Polymer-Based PTC Composites

Positive Temperature Coefficient Materials for Intelligent Overload Protection in the New Energy Era