Abstract:The modern rhythm of human life leads to well-known problems, which are air, water and soil pollution and climate warming. An increase in the power of industries and vehicles leads not only to atmospheric pollution by-products of incomplete fuel combustion but also to various microscopic particles that form aerosols, which carry an obvious danger to human health and also pollute the buildings' facades. An environmentally friendly building material with a hybrid method "Nano-titania gradient" was developed. This method consists of forming a gradient of n-TiO2 particles concentration in the composite since the physical properties of the composite are always inextricably linked to the geometry. To increase the efficiency of the photocatalytic process, a method of surface sensitization of titanium dioxide with the use of graphene oxide was proposed, which contributed to an increase in the overall photosensitivity. Thus, the decomposition of nitrogen oxide by volume with the modified surface increased by 27% in comparison with the classic titanium dioxide, and the decomposition of volatile organic substances increased by 32%. It was found that for the facade plate made with surface-sensitized TiO2, the process of self-cleaning is completed after 3 h after the irradiation start. The modern rhythm of human life leads to well-known problems, which are air, water and soil pollution and climate warming. Using the theory of percolation, the concentration range of the photocatalyst content was calculated. To facilitate the material, waste cellulose was introduced. To increase the efficiency of the photocatalytic process, a method of surface sensitization of titanium dioxide (SS TiO2) with the use of graphene oxide was proposed. The analysis of the experimental-statistical models of the compressive strength shows that the optimum content of TiO2 was in the range from 0.8 to 1.1%, and cellulose from 0.4 to 0.8%, the optimum content of SS TiO2 was in the range from 0.7 to 1.1%, and cellulose from 0.4 to 0.8%. Analysis of the experimental and statistical model of the bending strength shows that the optimal content of TiO2 and SS TiO2 was in the range of 0.6 to 1.0%, and cellulose from 0.4 to 0.8%. When studying the structure of composites, it was found that titanium dioxide was sorbed on the surface of swollen cellulose fibers and remained there after the process of cement hydration. The effectiveness of the method of surface sensitization of titanium dioxide by combining it with graphene oxide was shown. Thus, the decomposition of nitrogen oxide by volume with the modified surface increased by 27% in comparison with the classic titanium dioxide, and the decomposition of volatile organic substances increased by 32%. It was found that for the facade plate made with surface-sensitized TiO2, the process of self-cleaning was completed after 3 h after the irradiation start.

Preparation of Titanium Dioxide Nano Particle Modified Photocatalytic Self-Cleaning Concrete

Study on Nano- Titanium Dioxide Thin Film Coated on Self-cleaning Glass Surface

Synthesis of TiO2 Based Superhydrophobic Coatings for Efficient Anti-Corrosion and Self-Cleaning on Stone Building Surface

In-situ Construction of TiO2/Ag Heterojunction Coating for Forming a Photocatalytic Self-cleaning Surface of Concrete

Self-cleaning durability assessment of TiO2/SiO2 photocatalysts coated concrete: Effect of indoor and outdoor conditions on the photocatalytic activity

In-Situ Generation of Nano TiO2 from MIL-125(Ti) and Its Role in Boosting the Photocatalytic Degradation of Tetracycline Hydrochloride

Preparation and Properties of TiO2/Bentonite Composite Photocatalytic Materials at Room Temperature

Progress of research on photocatalytic self-cleaning concrete

Self-Cleaning Cement-Based Building Materials

Ecological Efficiency Photocatalytic Concrete

Purification effect on runoff pollution of porous concrete with nano-TiO<sub>2</sub> photocatalytic coating

Analyzing the Effects of Nano-Titanium Dioxide and Nano-Zinc Oxide Nanoparticles on the Mechanical and Durability Properties of Self-Cleaning Concrete

Preparation of Nano-TiO2-Coated SiO2 Microsphere Composite Material and Evaluation of Its Self-Cleaning Property

Evaluation of self-cleaning performance of TiO2-intermixed and TiO2-coated cement mortars under natural sunlight

Preparation of nano-TiO2 by waste clay bricks and photocatalytic effect on concrete

Developing Novel Photocatalytic Cementitious Permeable Pavements for Depollution of Contaminants and Impurities in Urban Cities

Fabrication of superhydrophilic self-cleaning SiO2–TiO2 coating and its photocatalytic performance

Photocatalytic Concrete Developed by Short Seedless Hydrothermal Method for Water Purification

Effects of the use of TiO2 on the early ages of white cement-based mortars: analysis of chemical, physical, mechanical, and photocatalytic properties

Super-hydrophobic Silver-Doped TiO2 @ Polycarbonate Coatings Created on Various Material Substrates with Visible-Light Photocatalysis for Self-Cleaning Contaminant Degradation

Superhydrophilic wollastonite-nanoTiO2 composite photocatalyst prepared by a wet grinding method: The effects of carriers and their application in the self-cleaning coatings