Ir Laser Induced Meniscus Evaporation from A Microchannel

Qingyun Xu,Rong Chen,Hong Wang,Xun Zhu,Qiang Liao,Xuefeng He

DOI: https://doi.org/10.1016/j.ces.2015.03.011

IF: 4.7

2015-01-01

Chemical Engineering Science

Abstract:In this work, the characteristics of the meniscus evaporation from a microchannel were studied, which was induced by the photothermal effect of the infrared laser with the wavelength of 1550nm. The evaporation rate and mass transfer coefficient at the interface were determined by the proposed image process technique coupled with an infrared camera. Experimental results showed that once the infrared laser was applied, the interface temperature was rapidly increased but with non-uniform distribution as a result of such a tiny local heating source. Accompanying with the rapid temperature rise, the meniscus evaporation was also immediately actuated. After a certain laser heating period, the interface temperature was increased to a stable value with relatively uniform distribution. In the meantime, the evaporation rate increased and became steady. Besides, the effects of the laser power and laser spot position on the evaporation rate and mass transfer coefficient at the interface were also explored. It was shown that both the interface temperature and evaporation rate linearly increased with the laser power as a result of more heat generated. Smaller distance between the laser spot and front interface yielded higher interface temperature and evaporation rate because of smaller heat transfer resistance resulting from smaller transport length. Reducing the distance could make the increase of the evaporation rate to become more significant. With respect to the mass transfer coefficient, it is interesting to find that the mass transfer coefficients under all cases were almost the same, about 0.4m/s.