Abstract:Zhou, Mengran ; Sun, Wanchang ; Liu, Eryong ; Xu, Yifan ; Zhang, Bo ; Cai, Hui ; Zhang, Jingli ; Enhanced corrosion-resistant Ni-Cu-P amorphous coatings were applied to AZ91D magnesium alloy substrates using an integrated approach that included direct-current (DC) copper pre-plating and electroless Ni-Cu-P plating at varying CuSO4 concentrations. The effects of CuSO4 concentration on the microstructure, electrochemistry behavior and corrosion rate of Ni-Cu-P coatings and the adhesion between the Ni-Cu-P coating and the magnesium alloys substrate were investigated. The results indicated that the surface of the Ni-Cu-P ternary coating which integrated well with the magnesium alloys substrate exhibited heterogeneous cell structure with relatively flat and dense structure. When the CuSO4 concentration was 0.8 g/L, the mass fraction of P in the coating was 9.06 wt% meaning amorphous Ni-Cu-P coating. The results of the Nyquist and Bode graph, corrosion rate, corrosion morphologies and of the Ni-Cu-P coatings with different CuSO4 addition indicated that the corrosion resistance reached optimization with corrosion potential of -0.31 V, the corrosion current density of 0.0039 A/cm2 when the CuSO4 concentration is 0.8 g/L. Furthermore, the adhesion test confirmed that the adhesion of Ni-Cu-P coatings improved gradually as the CuSO4 concentration increased and exhibited optimum when added 1.0 g/L CuSO4. The obtained Ni-Cu-P coating with amorphous structure prevented effectively magnesium alloy from corrosion.

Effect of Microstructures on Corrosion Behavior of Nickel Coatings: (I) Abnormal Grain Size Effect on Corrosion Behavior

Effect of Grain Size on Corrosion of Nanocrystalline Copper in NaOH Solution

Effect of Grain Size on Deformation and Fracture of Inconel718: an In-Situ SEM-EBSD-DIC Investigation

Study on microstructure and corrosion resistance of Ti-doped nickel-based alloy coatings

Microstructure and Electrochemistry Behavior of Ni-Cu-P Ternary Nickel-Based Amorphous Coating

Effect of cupric sulfate on the microstructure and corrosion behavior of nickel-copper nanostructure coatings synthesized by pulsed electrodeposition technique

Effect of electroless deposition on the corrosion resistance property for NdFeB permanent magnets with surface coating of Ni-P alloy

The Effect of Annealing on Microstructure and High Temperature Erosion Property of Arc-Spraying Coatings Containing Nanosized Ceramic Powders

Influences of Grain Size on Electrochemical Corrosion Behaviors of Nickel-Based Alloy 718

Effect of Tungsten on Microstructures of Annealed Electrodeposited Ni-W Alloy and Its Corrosion Resistance

Effect of Different Particles Distribution on Microstructure and Corrosion Resistance of Nickel-Base Laser Cladding Coatings

Electrodeposition and Characterization of Nano-Structured Black Nickel Thin Films

Effect of Powder Particle Size on Microstructure and Mechanical Properties of Cold-Sprayed Pure Nickel Coatings

Effect of electrodeposition temperature on grain orientation and corrosion resistance of nanocrystalline pure nickel

Influence of Electrodeposition Conditions on the Microstructure and Corrosion Resistance of Zn–Ni Alloy Coatings from a Deep Eutectic Solvent

Particle Size-Dependent Microstructure, Hardness and Electrochemical Corrosion Behavior of Atmospheric Plasma Sprayed NiCrBSi Coatings

Effects of Nickel on the Oxide/Metal Interface Morphology and Oxidation Rate During High-Temperature Oxidation of Fe–Cu–Ni Alloys

Effects of Nickel on the Microstructure, Mechanical properties and Corrosion Resistance of CoCrFeNixAl0.15Ti0.1 High Entropy Alloy

The influence of electrodeposited Ni-Co alloy coating microstructure on CO2 corrosion resistance on X65 steel

Investigation on Microstructure and Properties of the Electrodeposited Ni-SiC Composite Coating

Bending deformation and indentation hardness of electrochemically deposited nanocrystalline nickel-iron alloys