Abstract:Ultrasonic assisted solidification (UST), heat treatment and alloying are all effective methods to control the microstructure of materials and improve their properties. In this paper, the Nb-16Si-20Zr-2C- x W composites were prepared using ultrasonic assisted solidification technology of high temperature melt (≥1800°C) and heat treatment. The influence mechanism of ultrasonic, the W element, and the synergistic regulation mechanism of ultrasonic and heat treatment on the material were studied. Nb-16Si-20Zr-2C- x W(UST) alloys are mainly composed of Nbss phase and γNb 5 Si 3 phase, and their microstructures are mainly divided into strong active zone(SZ) and weak active zone(WZ). In the Nb-Si superalloy melt treated by ultrasonic wave, the area near the ultrasonic sound source is the strong active zone, while the area far away from the ultrasonic sound source is the weak active zone. The features of faceted primary phases and non-faceted primary phases in the SZ and WZ are explained by the equation of undercooling degree at different interfaces and effect of ultrasonic on component undercooling. As the W element content in the alloys (UST) increases, the content of the Nbss phase increases, the median diameter of the primary γNb 5 Si 3 phase decreases, and the room temperature fracture toughness and compressive strength show an upward trend. When the addition amount of W element reaches 2 at%, there are more crack deflections, crack bridging and secondary cracks in the crack propagation path. Through the special arrangement of primary γNb 5 Si 3 phase in the ultrasonic field, the energy density of ultrasonic waves in the melt is calculate to be 33.5 kW/m 2 . The microstructure of Nb-16Si-20Zr-2C- x W alloys(UST+HT) became more uniform and spheroidize. It is worth mentioning that there are plenty of long strip γNb 5 Si 3 phases with different orientations in the Nb-16Si-20Zr-2C-0.1W(UST+HT) alloy and the long strip γNb 5 Si 3 phases with the same orientation are arranged in a periodic manner. This special composite structure induces crack deflections and branching cracks when cracks propagation, so the room temperature fracture toughness of Nb-16Si-20Zr-2C-0.1 W (UST+HT) alloy reaches 15.66 MPa·m 1/2 .

Microstructural Characterization and Mechanical Properties of Nb–Ti–C–B In-Situ Composites with W Addition

High Temperature Tensile Properties of in Situ TiBw/Ti6Al4V Composites with a Novel Network Reinforcement Architecture

Effect of TiB_2 content on microstructure and mechanical properties of in-situ fabricated TiB_2/B_4C composites

Microstructural and Mechanical Characterization of Multiphase Nb-based Composites from Nb–Ti–C–B System

In-situ Precipitated Network Structure and High-Temperature Compressive Behavior of Nb–Ti–C–B Composites

Effect of NbC Content on Microstructure and Mechanical Properties of W-NbC Composites

Microstructure and tensile properties of in situ synthesized (TiBw + TiCp)/Ti6242 composites

Effect of Nb addition on microstructure and mechanical properties of TiC/Ti-7.8Cr composites

Microstructure and compressive properties of in situ synthesized (TiB + TiC)/Ti composites

High-temperature Mechanical Properties and Strengthening Mechanism of In-situ (TiB+ TiC)/Ti-1100 Composite

Microstructures and Properties of W-Lu2O3 Composites Strengthened with Nb and C Trace Elements

Mechanical Properties and Strengthening Effects of in Situ (Tib+tic)/ti-1100 Composite at Elevated Temperatures

Microstructure Evolution of Ti–46Al–6Nb–（Si,B） Alloys During Heat Treatment with W Addition

Microstructure and Mechanical Properties of Nb/Nb5Si3 in Situ Composites in Nb–Mo–Si and Nb–W–Si Systems

Co-construction of microstructure evolution and wear resistance of in-situ TiBw/TA15 composites with network structure

Microstructure and tensile properties of in situ synthesized (TiC + TiB + Nd2O3)/Ti-alloy composites at elevated temperature

Microstructures and mechanical properties of in-situ TiB2/Al-Si-Mg composites

The synergistic mechanism of ultrasonic and heat treatment on the composite structure and mechanical properties of Nb-Si-Zr based in-situ composites

The Microstructure and Mechanical Properties of Carbon Nanotube-Reinforced W-Matrix Composites

Hot-Tensile Properties of In Situ Synthesized Multiple-Reinforced (TiB+TiC+Nd2O3)/Ti-Alloy Composites

Mechanical Properties and Strengthening Mechanisms of in Situ (Tib+tic)/ti-1100 Composite at Elevated Temperature