Abstract:Purpose Solder bumps for chip interconnections are downsizing from current approximately 100 μm to the expected 1 μm in future. As a result, the Cu-Ni cross-interaction in Cu/Solder/Ni solder joints will be more complicated and then strongly influence the growth of the intermetallic compounds (IMCs). Thus, it is critical to understand the fundamental aspects of interfacial reaction in micro solder joints. This paper aims to reveal the effect mechanism of reflow temperature and solder size on the interfacial reaction in Cu/Solder/Ni solder joints. Design/methodology/approach The Cu-Ni cross-interaction in the Cu/Sn/Ni micro solder joints with 50 and 100 μm solder sizes at 250°C and 300°C were observed, respectively. The line-type interconnects were soaked in silicone oil, and the temperature of the line-type interconnects was 250 ± 3°C and 300 ± 3°C, which were monitored by a fine K-type thermocouple, and followed by an isothermal aging process at various times. After aging, the specimens were removed from the silicone oil and cooled in the air to room temperature. Findings The major interfacial reaction product on both interfaces was (Cu,Ni) 6 Sn 5 , and the asymmetric growth of (Cu,Ni) 6 Sn 5 , evidenced by the thickness of (Cu,Ni) 6 Sn 5 IMCs at the Sn/Ni interface was always larger than that at the Sn/Cu interface, resulted from the directional migration of Cu atoms toward the Sn/Ni interface under Cu concentration gradient. The morphology of (Cu,Ni) 6 Sn 5 IMC at Sn/Cu interface was columnlike at 250°C, and which changed from columnlike to scallop with large aspect ratio at 300°C, while that at Sn/Ni interface gradually evolved from needlelike to the mixture of needlelike and layered at 250°C, and which evolved from needlelike to scallop with large aspect ratio at 300°C. The evolution of morphology of (Cu,Ni) 6 Sn 5 is attributed to the content of Ni. Furthermore, the results indicate that the Cu-Ni cross-interaction was stronger with small solder size and relatively low temperature in the Cu/Sn/Ni micro solder joints. Originality/value The asymmetric growth of (Cu,Ni) 6 Sn 5 in the Cu/Sn/Ni micro solder joints, evidenced by the thickness of (Cu,Ni) 6 Sn 5 IMCs at the Sn/Ni interface, was always larger than that at the Sn/Cu interface. The morphology evolution of (Cu,Ni) 6 Sn 5 IMC at both interfaces was attributed to the content of Ni. The Cu-Ni cross-interaction was stronger with small solder size and relatively low temperature in the Cu/Sn/Ni micro solder joints.

Nanoindentation Study on Micromechanical Behaviors of Au–Ni–Sn Intermetallic Layers in Au–20Sn/Ni Solder Joints

Experimental and Statistical Study of the Fracture Mechanism of Sn96.5Ag3Cu0.5 Solder Joints via Ball Shear Test

Theoretical and experimental investigations on mechanical properties of (Fe,Ni)Sn2 intermetallic compounds formed in SnAgCu/Fe-Ni solder joints

Ni/Ni3Al interface-dominated nanoindentation deformation and pop-in events

Microstructural evolution of Cu–Sn–Ni compounds in full intermetallic micro-joint and in situ micro-bending test

Mechanical Property Of Cu-Sn-Ni Intermetallics In The Full Intermetallic Micro-Joints Formed With Transient Liquid Phase Soldering

Effect of Nano-Cu 6 Sn 5 upon development mechanism of Cu–Ni–Sn compounds and mechanical characteristics for mixed solder joints

Effect of Nano-Intermetallic Compound on Creep Properties and β-Sn Grain Recrystallization of Cu/Sn–Ag–Cu/Ni Solder Joints

Mechanical Response of Cu/Sn58Bi-xNi/Cu Micro Solder Joint with High Temperatures

In-situ fusion process and Cu–Sn compounds evolution mechanism of nano-intermetallic compound mixed solder joints

Mechanical properties and intermetallic compound formation at the Sn/Ni and Sn-0.7wt.%Cu/Ni joints

Effect of Ni content on the creep properties of Cu/Sn–0.3Ag–0.7Cu/Cu solder micro-joints

Interfacial microstructure, shear strength and wettability of Ni-added Sn-0.3Ag-0.7Cu/Cu solder joint

Effect of reflow temperature and solder size on Cu-Ni cross-interaction in the Cu/Sn/Ni micro solder joints

Growth of the nano-phase intermetallic compounds and its effect on mechanical behavior of Au80Sn20/CrMnFeCoNi solder joints during isothermal aging

Enhancement effect of Ni on the mechanical and thermodynamic properties of Au-xNi (x=0.5,1.0,1.5,2.0,2.5,3.0) alloy: a first-principles study

Creep mechanism in characteristic orientation of Sn and Sn-1.8Ag by nanoindentation

Interfacial reactions between pure indium solder and Au/Ni metallization

Growth of intermetallic compounds and their reinforcement on CrCoNi/Au80Sn20 soldering interfaces

Microstructure and kinetic analysis of the properties and behavior of nickel (Ni) nano-particle doped tin–zinc–bismuth (Sn–8Zn–3Bi) solders on immersion silver (Ag)-plated copper (Cu) substrates

In-situ isothermal aging TEM analysis of a micro Cu/ENIG/Sn solder joint for flexible interconnects