Abstract:Although polyethersulfone (PES) membranes are extensively utilized in water and wastewater treatment, they typically encounter serious bio/organic fouling problems. In this work, an antimicrobial and antifouling PES membrane was developed through incorporating novel ZnO/PHMB (zinc oxide/ polyhexamethylene biguanide hydrochloride) nanocomposites on the surface of a commercial PES membrane, with PDA (polydopamine) serving as an intermediate connection layer. XPS, along with synchrotron-based XRF and ATR-FTIR results confirmed the successful synthesis of the ZnO/PHMB nanocomposites and ZnO/PHMB membranes. The ZnO/PHMB nanocomposites exhibited an impressive antimicrobial rate of 99.99 % with a minimal amount of PHMB addition (wt ZnO :wt PHMB = 1:0.01). The concentration of the ZnO/PHMB nanocomposites had the most significant impact on the antimicrobial performance of the ZnO/PHMB membrane. The 600ZP membrane (i.e., the PES membrane modified with 600 mg/L ZnO/PHMB nanocomposites) emerged as the optimal choice, as evidenced by its commendable antimicrobial performance (92.80 %), water flux (249.02 LMH), RB (Rose Bengal sodium salt) rejection (93.96 %), and cost-benefit considerations. Compared to the pristine PES membrane, the 600ZP membrane showed 5.32 %, 15.76 %, and 7.62 % increased hydrophilicity, water flux, and RB rejection rate, respectively. Additionally, the 600ZP membrane possessed a bactericidal rate of 92.80 % and a flux recovery rate of 89.24 % after three cycles of SA (sodium alginate) filtration, indicating enhanced antimicrobial and antifouling capacities. The 600ZP membrane exhibited a remarkable 91.05 % higher water flux following prolonged (72 h) treatment of secondary effluent, compared to the PES membrane. Attribute to the increased hydrophilicity, outstanding antimicrobial activity, as well as excellent stability and durability, the as-prepared ZnO/PHMB membrane shows great potential for wastewater treatment.

Antifouling and blood‐compatible poly(ether sulfone) membranes modified by zwitterionic copolymers via In situ crosslinked copolymerization

Engineering of hemocompatible and antifouling polyethersulfone membranes by blending with heparin-mimicking microgels

Improved Antifouling Properties of Polyvinyl Chloride Blend Membranes by Novel Phosphate Based-Zwitterionic Polymer Additive

Improved Antifouling Properties of Poly(Ether Sulfone) Membrane by Incorporating the Amphiphilic Comb Copolymer with Mixed Poly(Ethylene Glycol) and Poly(Dimethylsiloxane) Brushes

Enhancing the Antifouling and Antimicrobial Properties of Poly(ether sulfone) Membranes by Surface Quaternization from a Reactive Poly(ether sulfone) Based Copolymer Additive

Versatile Antifouling Polyethersulfone Filtration Membranes Modified Via Surface Grafting of Zwitterionic Polymers from a Reactive Amphiphilic Copolymer Additive.

Zwitterionic Hydrogel Thin Films As Antifouling Surface Layers of Polyethersulfone Ultrafiltration Membranes Anchored Via Reactive Copolymer Additive

Improvement of Antifouling and Antibacterial Properties of Poly(ether Sulfone) UF Membrane by Blending with a Multifunctional Comb Copolymer

Engineering High-Effective Antifouling Polyether Sulfone Membrane with P(Peg-Pdms-Kh570)@Sio2 Nanocomposite Via In-Situ Sol-Gel Process

Ischemia-reperfusion injury in a diet-induced rat fatty liver.

Hydrophilic modification of a PSU membrane with block copolymer of PS-b-SBMA

Anti-Fouling and Anti-Bacterial Polyethersulfone Membranes Quaternized from the Additive of Poly(2-Dimethylamino Ethyl Methacrylate) Grafted Sio2 Nanoparticles

Novel antifouling polysulfone matrix membrane modified with zwitterionic polymer

Novel polysulfone hybrid ultrafiltration membrane prepared with TiO2-g-HEMA and its antifouling characteristics

Effects of a dual functional filler, polyethersulfone-g-carboxymethyl chitosan@MWCNT, for enhanced antifouling and penetration performance of PES composite membranes

Antinociceptive effects of delta-opioid agonists in Rhesus monkeys: effects on chemically induced thermal hypersensitivity.

Development of an antimicrobial and antifouling PES membrane with ZnO/poly(hexamethylene biguanide) nanocomposites incorporation

Polysulfone-based amphiphilic polymer for hydrophilicity and fouling-resistant modification of polyethersulfone membranes

An Extending of Candidate for the Hydrophilic Modification of Polysulfone Membranes from the Compatibility Consideration: the Polyethersulfone-Based Amphiphilic Copolymer As an Example

Enhancing the antifouling property of polymeric membrane via surface charge regulation

Route to Hemocompatible Polyethersulfone Membranes Via Surface Aminolysis and Heparinization.