Abstract:Accumulation of millions of tons of waste printed circuit boards powders (WPCBP) ate causing serious environmental pollution as it contains lots of toxicant substances. This work had explored the potential use of WPCBP as a reinforcement to replace wood flour (WF) for engineering value added high-density polyethylene (HDPE)-wood composites. Pyrolysis gas chromatography-mass spectrometry, fourier transform infrared, thermos-gravimetric analysis, scanning electron microscopy (SEM) and X ray fluorescence were selected to analyze the physico-chemical properties of WPCBP, and the results showed that the WPCBP contained bromine flame retardants and transition metals. Incorporating WPCBP into HDPE-wood composites improved the notched impact strength, water absorption rates "and rheological properties, while it reduced the oxidation induction time (OIT) which was due to the transition metals in WPCBP. When the content of WPCBP and WF fixed at 20 wt % and 10 wt %, the addition of KH-550 and PE-g-MAH simultaneously improved the tensile strength and notched impact strength of the composites which were enhanced by 64.4% and 66.1% compared to those of unmodified samples. All composites containing modifiers showed higher storage modulus and higher interfacial adhesion between the filler and matrix with respect to the original composites. SEM studies revealed that the addition of KH-550 and PE-g-MAH improved the interfacial adhesion between fillers and HDPE matrix. The value of this work lies in the fact that apparent mechanical properties improvement of HDPE composites has been achieved by the incorporation of PE-g-MAH and KH-550 modified WPCBP, which might be fruitful for reducing the production cost of the HDPE-wood composites and brought forward a new way to reuse WPCBP for a sustainable world. (C) 2017 Elsevier Ltd. All rights reserved.

Synergistic Compatibilization and Reinforcement of Hdpe/Wood Flour Composites

Well-Defined Pe-B-Pdms Diblock Copolymers Via The Combination Of Thiol-Ene Click And Esterification Reactions: Facile Synthesis And Compatibilization For Hdpe/Silicone Oil Blends

Significant Improvement in Performance of Recycled Polyethylene/Wood Flour Composites by Synergistic Compatibilization at Multi-Scale Interfaces

Amide wax-assisted interfacial compatibilization of maleic anhydride-grafted polyethylene for high-performance wood-plastic composites

Structure-property Relationships of Reactively Compatibilized PHB/EVA/starch Blends.

Wood‐thermoplastic Composites from Wood Flour and High‐density Polyethylene

EFFECTS OF COMPATIBILIZERS ON SELECTED PROPERTIES OF HDPE COMPOSITES HIGHLY FILLED WITH BAMBOO FLOUR

Glass fiber/wood flour modified high density polyethylene composites

The Effects of Coupling/grafting Modification of Wood Fiber on the Dimensional Stability, Mechanical and Thermal Properties of High Density Polyethylene/wood Fiber Composites

Study on PE-HD/Wood Fiber Composites Compatibilized with Ethylene Methacrylic Acid Copolymer

Interfacial adhesion mechanisms of ultra-highly filled wood fiber/polyethylene composites using maleic anhydride grafted polyethylene as a compatibilizer

Effect of wood flour and compatibilizer content on the properties of wood-plastic composites

Compatibilizing Modification and Mechanism of PP/WF Composites

Transform Rice Husk and Recycled Polyethylene into High Performance Composites: Using a Novel Compatibilizer to Infiltratively Enhance the Interfacial Interactions

Sustainable Utilization of Waste Printed Circuit Boards Powders in Hdpe-Wood Composites: Synergistic Effects of Multicomponents on Structure and Properties

Effect of Functionalized Polyethylene Wax on the Melt Processing and Properties of Highly Filled Magnesium Hydroxide/Linear Low-Density Polyethylene Composites

Effect of Interfacial Modifiers on Physical Properties and Flammability Properties of Pe/Wood Composites

Mechanical properties and water absorption behavior of injection-molded wood fiber/carbon fiber high-density polyethylene hybrid composites

Optimizing the rheological and mechanical properties of ultra-highly filled wood fiber/polyethylene composites through binary alloy matrix strategy

STUDY ON PROPERTIES OF HIGH DENSITY POLYETHYLENE/WOOD FLOUR COMPOSITES

Effect of Compatibilizer on Morphology and Properties of HDPE/Nylon 6 Blends