Abstract:Electrospinning is a simple and straightforward process by which continuous polymer fibers with diameter ranging from a few nanometers to microns can be produced using an electrostatically driven jet of polymer solution(or polymer melt).In the present contribution,ultrafine fibers were spun from polyethylene oxide(PEO)/water solution using a homemade electrospinning set-up.The effects of the concentration of polymer solution and spinning voltage on the morphology of fibers and distribution of fiber diameters were investigated.A more comprehensive and systematic understanding of process parameters of the electrospinning was obtained.In this experiment fibers with diameter ranging from 100 nm to 1000 nm were obtained.The results showed that both the concentration of polymer solution and spinning voltage were important factors characterizing the morphology of fibers and distribution of fiber diameters.The concentration of polymer solution played an important role in the morphology of the fibers obtained.Lower concentration of polymer solution(0.04 kg/L PEO aqueous solution) tended to facilitate the formation of fibers with beads,and smooth and uniform fibers without beads were obtained at the concentration of 0.05 kg/L PEO aqueous solution and 0.06 kg/L PEO aqueous solution.As other process parameters were fixed,raising the concentration of polymer solution resulted in the increasing of average diameter of fibers.Spinning voltage also had an influence on the average diameter of fibers.Thinner fibers were received on the target with higher voltage applied on the nozzle at a given flow rate.The morphology of fibers electrospun from PEO was observed and analyzed by scanning electron microscopy(SEM).

Predicting Poly(Vinyl Pyrrolidone)'S Solubility Parameter and Systematic Investigation of the Parameters of Electrospinning with Response Surface Methodology

Optimization of Electrospinning Parameters for Lower Molecular Weight Polymers: A Case Study on Polyvinylpyrrolidone

A Machine Learning Approach to Model the Electrospinning Process of Biocompatible Materials

Preparation and Properties of Poly (vinyl Alcohol) Nanofibers by Electrospinning

Experimental Investigation of the Governing Parameters in the Electrospinning of Polyethylene Oxide Solution

Fabrication of Continuous Aligned Polyvinylpyrrolidone Fibers Via Electrospinning by Elimination of the Jet Bending Instability

Experimental study and prediction of the diameter of melt-electrospinning polypropylene fiber

Evaluation of the effective parameters on the electrospinning of polyvinyl alcohol–chitosan nanofibers using response surface methodology (RSM)

Experimental Investigation of the Effect of Processing Parameters on the Formation of Electrospun Polyethylene Oxide Nanofibers

Morphological Modulation of Electrospun PVDF/PVP Nanofibers

Study on electrospinnability of PVP/PEO composite micro-nano fibers

Effect of hyperbranched poly(ester amine) additive on electrospinning of low concentration poly(methyl methacrylate) solutions

The effect of relative humidity and evaporation rate on electrospinning: fiber diameter and measurement for control implications

Investigation of the rheological response of a bio-liquefied formaldehyde resin-based precursor for electrospinning

Characteristics and challenges of Poly(ethylene-co-vinyl acetate) solution electrospinning

Electrospinning of ultrafine PVDF/PC fibers from their dispersed solutions

Effects of Solvent on Structures and Properties of Electrospun Poly(ethylene Oxide) Nanofibers

Use of mixed low/high vapor pressure solvent as a novel solvent design strategy for tuning fiber diameter in electrospun mats

Electrospinning of Soy Protein Isolate/Poly (vinyl alcohol)

Effect of Solution Rate on Electrospinning

Interaction Between Poly(vinyl Alcohol) and Layered Double Hydroxide (LDH) Particles with Different Topological Shape and Their Application in Electrospinning