Abstract:The aim of this study is to investigate the effects of various process parameters (the grinding-wheel speed, feed rate, workpiece speed, spark-out grinding time, and grinding-wheel granularity) on the surface quality of single-crystal SiC during nanogrinding while concurrently analysing the grinding mechanism and optimising the overall process. Experiments are performed to investigate the macrotexture and micromorphology of the single-crystal SiC surface. By employing image-processing technology, the proportion of brittle and plastic removal components is determined, thus facilitating a comprehensive analysis into the removal mechanism and the subsequent establishment of a material-removal model. The findings indicate that after grinding, the surface of single-crystal SiC exhibits a distinct grinding trajectory that radiates outwards from the centre, the density of the grinding trajectory is higher in the central area than at the periphery. The overall surface roughness increases from the centre to the edge. As the grinding-wheel speed increases, the feed rate decreases, the spark-out grinding time is prolonged, the grinding-wheel granularity increases, the abrasive cutting depth of the diamond grinding wheel decreases, the proportion of brittle removal on the surface of single-crystal SiC decreases, the proportion of plastic removal increases, the grinding groove becomes shallow, and the density of the groove increases significantly. Under the optimal process parameters, the surface roughness is reduced to 5.35 nm, and the smooth mirror effect is achieved via grinding.

Research on Grinding Block Wear in Grinding of SiC

Studies on the Surface Quality of the Unsteady-State Grinding Technique

Experimental Research on the Effect of Grinding Parameters on Ceramic Machined Surface Roughness

Influence of diamond wheel grinding process on surface micro-topography and properties of SiO2/SiO2 composite

Numerical Investigation of the Evolution of Grit Fracture and Its Impact on Cutting Performance in Single Grit Grinding

Experimental investigation on grinding-induced surface damage of Fiber Reinforced Ceramic Matrix Composites

Material Removal Mechanism of SiC Ceramic by Porous Diamond Grinding Wheel Using Discrete Element Simulation

Wear-induced variation of surface roughness in grinding 2.5D C f /SiC composites

Experimental investigation on the feasibility of high-efficiency and precision grinding of silicon carbide ceramics with monolayer brazed diamond wheel

Experimental study on grinding 2.5D C/SiC composites by electroplated grinding wheel with ordered abrasive clusters

Grinding performance evaluation of SiC ceramic by bird feather-like structure diamond grinding wheel

Grindability and surface quality of SiCp/Al composites with resin bond and electroplated wheels

Mechanism analysis and process optimization of nanogrinding single-crystal SiC

Numerical simulation of single abrasive grain grinding of silicon carbide surface

Understanding of the effect of wear particles removal from the surface on grinding silicon carbide by molecular dynamics simulations

Research on micro-grinding performance of 2.5D Cf/SiC composites

Diamond wheel grinding characteristics of 3D orthogonal quartz fiber reinforced silica ceramic matrix composite

Study on grinding of SiCp/Al composites by micro-textured monolayer brazed diamond wheel

Single diamond scribing of SiCf/SiC composite: Force and material removal mechanism study

Experimental Investigation On Surface High Temperature Wear Behaviors Of Si3n4 Ceramics For Rotary Ultrasonic Grinding

Investigation of grinding characteristics and removal mechanisms of 2D-C/SiC in high speed deep grinding