Abstract:Background: It is well known the PTB7:PC71BM based photovoltaic cells have drawn great attention because the devices now hold the record in PSC performance. However, the crystallinity level of the used materials was reported very low, and this was tested with X-ray diffraction. It was reported that crystalline portions of the component enable a high absorption and a balanced charge transportation. As regards the phenomenon, the impact of the additive 1,8-diiodooctane (DIO) on the device performance has been reported in many references. In the work, the impact of solvent additive DIO, on the morphology formation and performance of PTB7:PC71BM:F8BT (poly[(9,9-di-noctylfluorenyl-2,7-diyl)-alt-(benzo[2,1,3] thiadiazol-4,8-diyl)]) ternary PSCs was investigated.Methods: Researches related to ternary PSCs were reviewed, and many repeatable experiments have been done. To analyze the effect of DIO on the PTB7: PC71BM: F8BT based ternary cells, we did many measurements such as absorption spectral, PL spectral, device performance, X-ray Diffraction (XRD) and Atomic Force Microscopy (AFM).Results: It was found that the additive plays an important role in controlling the active layers morphology of the ternary devices. When 3% described solvent additive was added to solvent CB, an increasing nearly 36% in JSC and a relatively modest 41% gain in the FF were found, which resulting in a nearly doubling of the PCE. In order to analyze the influence of additive on the device performance, morphology characterization of PTB7: PC71BM: F8BT ternary layers was elucidated using AFM and energy transport progress of the devices was probed from photoluminescence spectra.Conclusion: In summary, we have successfully constructed the polymer ternary BHJ devices based on PTB7: PC71BM: F8BT with a nearly doubling of the PCE compared to CB fabricated ternary devices. By analyzing the absorption spectral, surface morphology, energy transfer progress and external quantum efficiency, we found that DIO as solvent additive can favor the charge separation into the charge transfer state after exciton dissociation. In more detail, an effective morphology in CB+DIO film can be obtained that provides a plentiful interfacial area for charge generation and a balanced percolation way for charge transfer, which resulting in a nearly doubling of the PCE. This study provides method to improve morphology of active films, and thus improve the performance for ternary PSCs.

Effect of Two-Step Annealing on the Performance of Ternary Polymer Solar Cells Based on P3ht:Pc71bm:Sq

All-inorganic, Hole-Transporting-layer-free, Carbon-Based CsPbIBr2 Planar Perovskite Solar Cells by a Two-Step Temperature-Control Annealing Process

Effect of Thermal Annealing on the Performance of Ternary Organic Photovoltaics Based on PTB7:PC71BM:F8BT

Inverted All-Polymer Solar Cells Based on a Quinoxaline–thiophene/naphthalene-Diimide Polymer Blend Improved by Annealing

Performance improvement of annealing-free P3HT : PCBM-based polymer solar cells via 3-methylthiophene additive

Quantitative Nanoscale Monitoring the Effect of Annealing Process on the Morphology and Optical Properties of Poly(3-Hexylthiophene)/[6,6]-phenyl C61-butyric Acid Methyl Ester Thin Film Used in Photovoltaic Devices

Realization of Performance Enhancement in Ternary Polymer Solar Cells by Broad Absorption, Efficient Energy Transfer, and Balanced Charge Carrier Mobility

Effect of Thermal Annealing on the Efficiency of Heterojunction Photovoltaic Cells Fabricated Using Poly(3-Hexylthiophene) and Methanofullerene, [6,6]-Phenyl C61-butyric Acid Methyl Ester.

Study of the effect of annealing process on the performance of P3HT/PCBM photovoltaic devices using scanning-probe microscopy

Annealing Effect on Photovoltaic Performance of Hybrid P3ht/In-Situ Grown Cds Nanocrystal Solar Cells

Morphology Study on Ternary Blend Polymer Solar Cell to Achieve Improved Device Performance

Annealed Treatment Effect in Poly(3-hexylthiophene):Methanofullerene Solar Cells

Dark and illuminated J(V) characteristics of thin layered bulk heterojunction P3HT:PCBM sandwich solar cells after thermal treatment

Thermal Annealing Effect on Ultrafast Charge Transfer in All-Polymer Solar Cells with a Non-Fullerene Acceptor N2200

The Effects of SQ Additive on Charge Carrier Transport and Recombination in PCDTBT:PC71BM Based Ternary Organic Solar Cells

Effects of Optical Interference and Annealing on the Performance of Poly (3-Hexylthiophene): Fullerene Based Solar Cells

Impact of Solvent Additive on Morphology of High-Efficiency Ternary Blend Solar Cell

Annealing Of P3ht:Pcbm Blend Film-The Effect On Its Optical Properties

Influence of thermal annealing on microstructure, energetic landscape and device performance of P3HT: PCBM-based organic solar cells

High Voc Ternary Nonfullerene Polymer Solar Cells with Improved Efficiency and Good Thermal Stability

Insight into the Role of PC71BM on Enhancing the Photovoltaic Performance of Ternary Organic Solar Cells