Abstract:Poly(3-hexylthiophene) (P3HT) with good electronic transmission capacity is one of promising material for organic photodetector. Compared with organic solar cells, the research of photodetector based on P3HT is deficient, especially in how to improve the light absorption efficiency and electronic transmission ability of active layer. Here, bulk heterojunction photodetectors with a structure of ITO/PEDOT:PSS/P3HT:PC61BM/C-60/Al were prepared by using P3HT as a donor and fullerene derivative (PC61BM) as an acceptor. The change of active layer thickness plays an important role in the effective transfer of photogenerated charge to the electrode. Although increasing the thickness of active layer can increase the light absorption efficiency, it may also lead to the recombination of electrons and holes in the process of long distance transmission. In addition, annealing condition is the key to the film forming process. Adjusting the annealing temperature can control the self-assembly of active layer, thus obtaining the ideal nano-size phase separation structure and reducing the recombination probability of photoexcitons. Therefore, the active layer thickness in P3HT devices varied at 120, 160, 180 and 200 nm and the devices were annealed at 100, 120, 130, 140 and 150 degrees C in order to probe the effect of these variables on photodetector performance. It was found that the device with a 180-nm thick active layer, after being annealed at 150 degrees C, exhibited the maximal responsivity of 268 mA/V at 550 nm and more than 200 mA/W in the wavelengths of 470 - 610 nm under the bias of -2 V. Furthermore, the same device showed a linear dynamic range of 95 dB after annealing at 120 degrees C. Our study demonstrates that the thickness of active layer is of great importance to the light absorption efficiency and the device performance, while the annealing treatment can significantly affect the morphology of active layer, as evidenced by AFM study, which reduces the recombination probability of holes and the electrons and thus improves the photodetector performance.

Effects of Optical Interference and Annealing on the Performance of Poly (3-Hexylthiophene): Fullerene Based Solar Cells

Dark and illuminated J(V) characteristics of thin layered bulk heterojunction P3HT:PCBM sandwich solar cells after thermal treatment

Quantitative Nanoscale Monitoring the Effect of Annealing Process on the Morphology and Optical Properties of Poly(3-Hexylthiophene)/[6,6]-phenyl C61-butyric Acid Methyl Ester Thin Film Used in Photovoltaic Devices

Study of the effect of annealing process on the performance of P3HT/PCBM photovoltaic devices using scanning-probe microscopy

Influence of thermal annealing on microstructure, energetic landscape and device performance of P3HT: PCBM-based organic solar cells

Annealing Treatment Effects on the Performances of Solar Cells Based on Different Composition Systems

Effect Of Doping Copper-Phthalocyanine And Annealing Treatment On The Performance Of Polymer Solar Cells

Annealed Treatment Effect in Poly(3-hexylthiophene):Methanofullerene Solar Cells

Effects of Thermal Annealing on the Solvent Additive P3HT PC 61 BM Bulk Heterojunction Solar Cells

Effect of Annealing Time of Active Layer on Properties of P3HT/PCBM Solar Cell

Roles of Thermal Annealing in Cyclopentadithiophene/thienopyrroledione:Fullerene Blended Film and Performance of Organic Photovoltaics

Annealing Of P3ht:Pcbm Blend Film-The Effect On Its Optical Properties

Annealing Treatment Effects on the Performances of Solar Cells Based on Different Solvent Blend Systems

Investigation of Annealing Effect on Optoelectronic Performance of Active Layer in Poly Organic Solar Cell

Effect of Thermal Annealing on the Efficiency of Heterojunction Photovoltaic Cells Fabricated Using Poly(3-Hexylthiophene) and Methanofullerene, [6,6]-Phenyl C61-butyric Acid Methyl Ester.

Effects of Annealing Temperature and Active Layer Thickness on the Photovoltaic Performance of Poly(3-hexylthiophene) Photodetector

The Effect of Annealing Treatment on Performance of Interdiffused Organic Photovoltaic Devices

Effects of thermal annealing on polymer photovoltaic cells with buffer layers and in situ formation of interfacial layer for enhancing power conversion efficiency

Post-Fabrication Annealing Effects in Polymer-Nanotube Photovoltaic Cells

Enhanced Performance of Poly(3-Hexylthiophene-2,5-diyl):[6,6]-Phenyl-c61-butyric Acid Methyl Ester Solar Cells by UV Irradiation

High Performance Solar Cell Based on Ultra-Thin Poly(3-Hexylthiophene): Fullerene Film Without Thermal and Solvent Annealing