Abstract:Background: It is well known the PTB7:PC71BM based photovoltaic cells have drawn great attention because the devices now hold the record in PSC performance. However, the crystallinity level of the used materials was reported very low, and this was tested with X-ray diffraction. It was reported that crystalline portions of the component enable a high absorption and a balanced charge transportation. As regards the phenomenon, the impact of the additive 1,8-diiodooctane (DIO) on the device performance has been reported in many references. In the work, the impact of solvent additive DIO, on the morphology formation and performance of PTB7:PC71BM:F8BT (poly[(9,9-di-noctylfluorenyl-2,7-diyl)-alt-(benzo[2,1,3] thiadiazol-4,8-diyl)]) ternary PSCs was investigated.Methods: Researches related to ternary PSCs were reviewed, and many repeatable experiments have been done. To analyze the effect of DIO on the PTB7: PC71BM: F8BT based ternary cells, we did many measurements such as absorption spectral, PL spectral, device performance, X-ray Diffraction (XRD) and Atomic Force Microscopy (AFM).Results: It was found that the additive plays an important role in controlling the active layers morphology of the ternary devices. When 3% described solvent additive was added to solvent CB, an increasing nearly 36% in JSC and a relatively modest 41% gain in the FF were found, which resulting in a nearly doubling of the PCE. In order to analyze the influence of additive on the device performance, morphology characterization of PTB7: PC71BM: F8BT ternary layers was elucidated using AFM and energy transport progress of the devices was probed from photoluminescence spectra.Conclusion: In summary, we have successfully constructed the polymer ternary BHJ devices based on PTB7: PC71BM: F8BT with a nearly doubling of the PCE compared to CB fabricated ternary devices. By analyzing the absorption spectral, surface morphology, energy transfer progress and external quantum efficiency, we found that DIO as solvent additive can favor the charge separation into the charge transfer state after exciton dissociation. In more detail, an effective morphology in CB+DIO film can be obtained that provides a plentiful interfacial area for charge generation and a balanced percolation way for charge transfer, which resulting in a nearly doubling of the PCE. This study provides method to improve morphology of active films, and thus improve the performance for ternary PSCs.

The Effects of SQ Additive on Charge Carrier Transport and Recombination in PCDTBT:PC71BM Based Ternary Organic Solar Cells

A Comprehensively Theoretical and Experimental Study of Carrier Generation and Transport for Achieving High Performance Ternary Blend Organic Solar Cells

Improving Charge Transport and Suppressing Charge Recombination in Small Molecule Ternary Solar Cells Via Incorporating Bis-PC71BM As a Cascade Material

Effects of BTA2 As the Third Component on the Charge Carrier Generation and Recombination Behavior of PTB7:PC71BM Photovoltaic System

PCDTBT8‐Doped PffBT4T‐2OD‐Based Ternary Solar Cells with Enhanced Open‐Circuit Voltage, Fill Factor, and Charge Separation Efficiency

Insight into the Role of PC71BM on Enhancing the Photovoltaic Performance of Ternary Organic Solar Cells

Regulating the Vertical Phase Distribution by Fullerene-Derivative in High Performance Ternary Organic Solar Cells

Promoting charge separation resulting in ternary organic solar cells efficiency over 17.5%

Realization of Performance Enhancement in Ternary Polymer Solar Cells by Broad Absorption, Efficient Energy Transfer, and Balanced Charge Carrier Mobility

From binary to quaternary: high-tolerance of multi-acceptors enables development of efficient polymer solar cells

Enhanced short circuit current density and efficiency of ternary organic solar cells by addition of a simple copolymer third component

Achieving over 11% Power Conversion Efficiency in PffBT4T-2OD-based Ternary Polymer Solar Cells with Enhanced Open-Circuit-voltage and Suppressed Charge Recombination

High-Performance Ternary Organic Solar Cells Enabled by Introducing a New A-DAD-A Guest Acceptor with Higher-Lying LUMO Level

Ternary Organic Solar Cells with a Phase-Modulated Surface Distribution Via the Addition of a Small Molecular Luminescent Dye to Obtain a High Efficiency over 10.5%

Effect of Two-Step Annealing on the Performance of Ternary Polymer Solar Cells Based on P3ht:Pc71bm:Sq

Enhanced Charge Transfer Between Fullerene and Non-Fullerene Acceptors Enables Highly Efficient Ternary Organic Solar Cells.

Suppressing charge recombination in small-molecule ternary organic solar cells by modulating donor-acceptor interfacial arrangements.

Enhanced and Balanced Charge Transport Boosting Ternary Solar Cells Over 17% Efficiency

Improved photon-to-electron response of ternary blend organic solar cells with a low band gap polymer sensitizer and interfacial modification

Suppressing Trap States and Energy Loss by Optimizing Vertical Phase Distribution Through Ternary Strategy in Organic Solar Cells

Impact of Solvent Additive on Morphology of High-Efficiency Ternary Blend Solar Cell