Abstract:Power supply systems based on air-cooled proton exchange membrane fuel cell (PEMFC) stacks are becoming more popular as power sources for mobile applications. We try to create a PEMFC model that allows for predicting the PEMFC operation in various climatic conditions. A total of two models were developed and used: the membrane electrode assemble (MEA) model and the PEMFC stack model. The developed MEA model allows to determine the influence of external factors (temperature) on the PEMFC power density. The data obtained using the developed model correlate with experimental data at low ambient temperatures (10–30 °C). The difference between the simulation and experimental data is less than 10%. However, the accuracy of the model during PEMFC operation at high (>30 °C) and negative ambient temperatures remains in doubt and requires improvement. The obtained data were integrated into the air-cooled PEMFC stack model. Data of the temperature fields distribution will help to manage the processes in the PEMFC stack. The maximum temperature is slightly above 60 °C, which corresponds to the optimal conditions for the operation of the stack. The temperature gradient across the longitudinal section is very low (<20 °C), which is a positive factor for the chemical reaction. However, the temperature gradient observed across the cross section of the PEMFC stack is 30 °C. The data obtained will help to optimize the mass-dimensional characteristics of air-cooled proton exchange membrane fuel cell and increase their performance. The synergetic effect between the MEA model and the PEMFC stack model can be successfully used in the selection of materials and the development of a thermoregulation system in the PEMFC stack.

Modeling and Analysis of Thermal-Management Impacts on Transient Performances of Pem Fuel Cells

A single-phase, non-isothermal model for PEM fuel cells

Numerical Investigation of Transient Responses of a PEM Fuel Cell Using a Two-Phase Non-Isothermal Mixed-Domain Model

Transient Behavior of PEM Fuel Cells

Thermal management system modeling of a water-cooled proton exchange membrane fuel cell

A model predicting performance of proton exchange membrane fuel cell stack thermal systems

Analysis of Water Management in Proton Exchange Membrane Fuel Cells

Dynamic cross-scale modeling and thermo-electric response characteristics of PEMFC based on standardized thermal resistance

Thermal Management System Modeling and Simulation of a Full-Powered Fuel Cell Vehicle

Numerical Modeling and Simulation of Pem Fuel Cells: Progress and Perspective

Numerical Modeling of Liquid Water Transport Inside and Across Membrane in PEM Fuel Cells

Experimental investigation of dynamic performance and transient responses of a kW-class PEM fuel cell stack under various load changes

A Review of Thermal Management of Proton Exchange Membrane Fuel Cell Systems

Thermal Management Subsystem Model and Temperature Control for Fuel Cells

A Study of Thermal Transient Performances of Molten Carbonate Fuel Cells

Thermodynamic Modeling and Performance Analysis of Vehicular High-Temperature Proton Exchange Membrane Fuel Cell System

Numerical investigation of parameter distributions in high-temperature PEMFCs under various cooling surface temperature gradients

Numerical and Experimental Investigation of the Asymmetric Humidification and Dynamic Temperature in Proton Exchange Membrane Fuel Cell

Experimentally and Numerically Investigating Cell Performance and Localized Characteristics for a High-Temperature Proton Exchange Membrane Fuel Cell

Analyzing Key Factors Influencing Water Transport in Open Air-Cooled PEM Fuel Cells

Investigation of the Ambient Temperature Influence on the PEMFC Characteristics: Modeling from a Single Cell to a Stack