Abstract:Heat management poses severe constraints when designing non-adiabatic multi-tubular packed-bed reactors for strongly exothermic or endothermic catalytic processes. The exploitation of conduction in the solid matrix of engineered continuous internals (e.g., honeycomb monoliths, open-cell foams, periodic open-cell structures) as a heat transfer mechanism alternative, or possibly additional, to fluid-phase convection, is a promising strategy to relax some of these constraints, offering new opportunities for the intensification of catalytic reactors. Preliminary experimental data and modelling studies show that this is particularly true for compact-scale applications, when conductive internals are packed with catalyst micro-pellets. In this work, through pilot-scale testing, we show that overall heat transfer coefficients as high as 1300 W/m 2 /K can be achieved in periodic open-cell structures (POCS) made of a highly conductive aluminium alloy, 3D printed with an external continuous skin and packed with 300–400 μm catalyst micro-pellets. To this aim, a Fischer-Tropsch experimental campaign has been carried out in a pilot-scale rig, using an established 20 wt% Co/Al 2 O 3 catalyst formulation and a tubular reactor (28.80 mm I.D., 20 cm catalyst bed length) externally cooled with an isothermal diathermic oil. Thanks to the outstanding heat transfer properties of the packed-POCS reactor, by progressively increasing the oil temperature from 180 °C to 225 °C, once-through CO conversions as high as 70 % have been measured at gas hourly space velocities exceeding 4000 cm 3 (STP)/h/g cat , resulting in C 5 + yields in excess of 0.35 g/h/g cat , with a CH 4 selectivity always below 15 %. Such performances, made possible by the intensified heat management granted by the adopted reactor internals, are among the best ever reported for a compact-scale Fischer-Tropsch tubular reactor.

An Experimental Study on a Microchannel Reactor for Fischer-tropsch Synthesis

Efficient Fischer–Tropsch microreactor with innovative aluminizing pretreatment on stainless steel substrate for Co/Al 2 O 3 catalyst coating

An Innovative Micro-Channel Catalyst Support with a Micro-Porous Surface for Hydrogen Production Via Methanol Steam Reforming

Effects of reaction progress in microchannel on microstructure of Cu-Zn catalyst

Microstructure Characters of Cu/ZnO Catalyst Precipitated Inside Microchannel Reactor

The Effects of Processing Parameters on the Properties of Micro-Scale Porous Surface for a Micro-Channel Reactor

Recent Advances in Reactor of Fischer-Tropsch Synthesis

A Micro-Reactor with Micro-Pin-fin Arrays for Hydrogen Production Via Methanol Steam Reforming

Study on the Impact of Methanol Steam Reforming Reactor Channel Structure on Hydrogen Production Performance

Experimental and simulation study of the temperature distribution in a bench‐scale fixed bed Fischer–Tropsch reactor

Heat transfer intensification in compact tubular reactors with cellular internals: A pilot-scale assessment of highly conductive packed-POCS with skin applied to the Fischer-Tropsch synthesis

Aqueous Phase Fischer–Tropsch Synthesis in a Continuous Flow Reactor

CFD Simulation with Detailed Chemistry of Steam Reforming of Methane for Hydrogen Production in an Integrated Micro-Reactor

Numerical study of heat and mass transfer by reverse water-gas shift reaction in catalyst-coated microchannel reactor

Operando magnetic resonance imaging of product distributions within the pores of catalyst pellets during Fischer–Tropsch synthesis

Fischer–Tropsch synthesis process development: steps from fundamentals to industrial practices

Performance Enhancement on A Micro-Column Structure Reformer Via Thick-Film Photoresist Pre-Protection

Numerical Analysis on Steam Methane Reforming in a Plate Microchannel Reactor: Effect of Washcoat Properties

Comparison of Preparation Methods of Iron-Based Catalysts for Enhancing Fischer-Tropsch Synthesis Performance

Development of Microreactor Applied to the Study of Catalytic Pyrolysis of Oil

Intensification of Catalytic Oxidation with a T-junction Microchannel Reactor for Deep Desulfurization