Abstract:Carbon dioxide (CO2) injection alters a reservoir’s original equilibrium, leading to gas–liquid–solid reactions within the reservoir, resulting in mineral dissolution and precipitation affecting the reservoir’s physical properties. Because of their good permeability, faults are critical in fluid dredging and dominant channel formation. The characteristics of faults, including their width and strata length, directly affect the path, distance, and range of fluid migration and exert further control on the trend of water–rock–gas geochemical reactions. This study focused on the control effect of the fracture system on the migration, reaction, and storage of supercritical CO2. The faulted Cretaceous reservoir in the Kela-2 gas field of the Tarim Basin was selected as the study formation, and 10 heterogeneous profile models were established using multiphase-flow, solute-transport numerical simulation. The differences in fluid migration and reaction ranges under different fracture lengths, fracture widths, fracture physical properties, and CO2 injection rate conditions were examined. The real-time changes in profile porosity were quantitatively determined, and the control effect of the fracture system on reservoir development was analyzed. The results showed that CO2 fluid entering the formation migrates primarily along the fault. Under the condition of a wider fracture, the fracture’s fluid accumulation and reaction range increase, the degree of acidification is weak, and the ultimate porosity increase is small. When the fracture extends into the reservoir over a greater distance, fluid migrates over a greater distance, and the effect on both sides of the fracture is weak because of less fluid accumulation. Similarly, a higher injection rate causes a longer migration, producing a thin and long injection region similar to that of a long fracture. Better fracture properties result in a more obvious dredging effect. When the fracture’s permeability is insufficient, the injected fluid accumulates at the bottom of the fault, and eventually, only the porosity at the base of the fault changes significantly. In conclusion, the fracture system plays a very important role in controlling fluid migration, reaction, and reservoir development through induced reactions, and different fracture conditions lead to different reservoir development conditions.

A Parametric Study of Fault Mechanical Changes Associated with Geological Sequestration of Carbon Dioxide

Relationship between pore structure and mechanical properties of bituminous coal under sub-critical and super-critical CO2 treatment

Co2 Geological Sequestration Modelling And Injection Induced Fracturing Analysis Of The Caprock

Uncertainty Quantification for Evaluating Impacts of Caprock and Reservoir Properties on Pressure Buildup and Ground Surface Displacement During Geological CO2sequestration

Geomechanical effects on CO2 leakage through fault zones during large-scale underground injection

A Multiscale Hydro‐geochemical‐mechanical Approach to Analyze Faulted CO2 Reservoirs

Uncertainty Quantification of CO 2 Leakage Through a Fault with Multiphase and Nonisothermal Effects

CO2 storage in deep saline aquifers: evaluation of geomechanical risks using integrated modeling workflow

Thermal Impact of Co2 Injection on Geomechanical Response at the Futuregen 2.0 Site: A Three-Dimensional Thermo-Geomechanical Approach

A mechanism of fluid exchange associated to CO2 leakage along activated fault during geologic storage

A fluid pressure and deformation analysis for geological sequestration of carbon dioxide

Effects of the mechanical response of low-permeability sandstone reservoirs on CO2 geological storage based on laboratory experiments and numerical simulations

Stability Analysis of Multi-Well Gas Injection for Storing Co2 in Underground Aquifer

Geomechanical analysis of formation deformation and permeability enhancement due to low-temperature CO2 injection in subsurface oil reservoirs

Uncertainty Quantification for Evaluating the Impacts of Fracture Zone on Pressure Build‐up and Ground Surface Uplift During Geological CO 2 Sequestration

Flow and Thermal Modeling of CO2 in Injection Well During Geological Sequestration

Control effect of fracture system on fluid migration, chemical reaction, and carbon dioxide storage

Pore-scale phenomena in carbon geological storage (Saline aquifers—Mineralization—Depleted oil reservoirs)

Analysis of dynamic characteristics and influencing factors of CO2 low-permeability coal reservoir sequestration

The Role of Geomechanics for Geological Carbon Storage

Three-Dimensional Analysis of A Faulted Co2 Reservoir Using an Eshelby-Mori-Tanaka Approach to Rock Elastic Properties and Fault Permeability