Abstract:Perovskite oxide molybdenum doped strontium ferrite, Sr2Fe1.5Mo0.5O6-delta (SFM), is a promising alternative hydrogen electrode material for solid oxide cells (SOCs) because of its robust stability, but usually suffers from insufficient electrochemical performance. In this work, the easily reducible and catalytically active nickel ion (Ni2+) has been substituted on the B-sites of perovskite oxide SFM in the oxidizing atmosphere to form Sr2Fe1.5-xNixMo0.5O6-delta (SFMNix, x = 0.1, 0.2, and 0.3), and then partially in-situ exsolved out of the parent matrix lattices as active nano-catalysts in the reducing atmosphere to fabricate Fe-Ni alloy nanoparticles decorated SFMNix (Fe-Ni@SFMNix) materials. It is demonstrated that the electrode electrochemical performance could be effectively enhanced by tuning the Ni doping content in the parent oxide. Sr2Fe1.3Ni0.2Mo0.5O6-delta (SFMNi0.2) electrode with the Ni doping content of 0.2 exhibits the excellent electrochemical performance with a relatively low electrode polarization resistance of 0.82 Omega cm(2) in a symmetrical cell at 800 degrees C in 97%H-2 -3%H2O atmosphere, which is ascribed to the maximum exsolved Fe-Ni alloy nanocatalysts from the parent oxide SFMNi0.2. In addition, the electrode reaction process with a high resolution based on the electrochemical impedance spectra has been systematically analyzed by using the distribution of relaxation times (DRT) technique. It is demonstrated by the DRT analysis results that the low-frequency electrode reaction process associated with the hydrogen adsorption, dissociation and ionization process in the frequency range of 1-10 Hz is identified as the rate-limiting step during the operation, meanwhile, this sub-step could be effectively accelerated by varying the Ni doping content with an optimal Ni doping content of 0.2. These results demonstrate that the variation of doping content in the parent perovskite oxide is an effective strategy to manipulate the electrode electrochemical performance, and exsolved Fe-Ni alloy nanoparticles decorated perovskite oxide SFMNi0.2 is a promising hydrogen electrode candidate for SOCs application. Our findings will guide the development of other ceramic oxides electrodes with effectively enhanced electrochemical performance for energy conversion and storage applications. (C) 2020 Elsevier Ltd. All rights reserved.

Sr2FeNbO6 Applied in Solid Oxide Electrolysis Cell As the Hydrogen Electrode: Kinetic Studies by Comparison with Ni-YSZ

High-Performance Sr0.95Fe0.8Mo0.1Ni0.1O3−δ Electrode for Reversible Symmetrical Solid Oxide Cells

In-situ Exsolution of Nanoparticles from Ni Substituted Sr2Fe1.5Mo0.5O6 Perovskite Oxides with Different Ni Doping Contents

Ni Doped La0.6Sr0.4FeO3-δ Symmetrical Electrode for Solid Oxide Fuel Cells

Sr2FeNi0.2Cu0.2Co0.1Mo0.5O6 as potential symmetrical electrode for intermediate-temperature solid-oxide fuel cells

High performance of intermediate temperature solid oxide electrolysis cells using Nd 2 NiO 4+δ impregnated scandia stabilized zirconia oxygen electrode

La0.6Sr0.4Fe0.8Ni0.2O3-δ perovskite with in-situ exsolved Ni-Fe nanoparticles as high activity catalyst for symmetric solid oxide electrolysis cells

Exsolved Fe–Ni nano-particles from Sr2Fe1.3Ni0.2Mo0.5O6 perovskite oxide as a cathode for solid oxide steam electrolysis cells

Leveraging in-situ formation of Ni–Fe nanoparticles to promote the catalytic performance of Ruddlesden-Popper based electrode for symmetrical solid oxide fuel cells

Characteristics of Nano-Structured SFM Infiltrated Onto YSZ Backbone for Symmetrical and Reversible Solid Oxide Cells

Nickel-Iron Alloy Nanoparticle-Decorated K2NiF4-Type Oxide as an Efficient and Sulfur-Tolerant Anode for Solid Oxide Fuel Cells

Infiltration of La0·6Sr0·4FeO3-δ Nanoparticles into YSZ Scaffold for Solid Oxide Fuel Cell and Solid Oxide Electrolysis Cell

Preparation Of Nanosized Nio-Ysz Composite Powders By Situ-Precipitation Method

Enhancing the Performance of Symmetrical Solid Oxide Fuel Cells with Sr2Fe1.5Mo0.5O6-δ Electrodes Via Infiltration of Pr6O11 Bifunctional Catalyst

A Novel High Performance Composite Anode with in Situ Growth of Fe-Ni Alloy Nanoparticles for Intermediate Solid Oxide Fuel Cells

Exsolved Fe–Ni nano-particles from Sr<sub>2</sub>Fe<sub>1.3</sub>Ni<sub>0.2</sub>Mo<sub>0.5</sub>O<sub>6</sub> perovskite oxide as a cathode for solid oxide steam electrolysis cells

La 3+-Substituted Sr2Fe1.5Ni0.1Mo0.4O6-δ As Anodes for Solid Oxide Fuel Cells

Preparation and Characterization of NiO/YSZ Cathode and BSCF/SDC Anode of SOEC for Hydrogen Production

Niobium Doped Lanthanum Strontium Ferrite As A Redox-Stable and Sulfur-Tolerant Anode for Solid Oxide Fuel Cells.

Bifunctional electrocatalysts Pr0.5Sr0.5Cr0.1Fe1-xNixO3-δ (x=0.1,0.2) for HOR and ORR of a symmetric solid oxide fuel cell

Preparation of NiO–YSZ composite powder by a combustion method and its application for cathode of SOEC